Photo oxidation of rice starch II. Using a water soluble photo initiator

A new photo oxidation system was established when rice starch was oxidized using UV irradiation and 4-(trimethyl ammoniummethyl) benzophenone chloride (BP2) as a photo initiator. BP2 is a water soluble photo initiator. The slurry prepared for photo oxidation contained rice starch, water and BP2 only. No oxidizing agents were added. Parameters affecting the photo oxidation process, i.e. temperature, concentration of BP2, material:liquor ratio and irradiation time were determined. The produced oxidized starch was evaluated by measuring the carboxyl content, carbonyl content and apparent viscosity. The produced photo oxidized rice starch showed sound increase in the carboxyl and carbonyl contents and sharp decrease in the apparent viscosity. The produced photo oxidized starch was tested for its suitability as a sizing agent for cotton yarns. Native starch and oxidized starch. used as a sizing agent by Misr Company of Spinning and Weaving in El-Mahalla El-Kubra (Egypt), were used for comparison. Sized cotton yarns were evaluated by measuring the tensile strength, elongation at break and percent of size removal. Cotton yarns sized using the prepared photo oxidized rice starch showed higher tensile strength, elongation at break and percent of size removal compared with native starch and oxidized starch used by Misr Company of Spinning and Weaving. (C) 2009 Elsevier Ltd. All rights reserved.