Biomechanical and bioactivity concepts of polyetheretherketone composites for use in orthopedic implants-a review

Minimally Invasive Plate Osteosynthesis Using a Locking Compression Plate for Distal Femoral Fractures

(2016) Ravi M Nayak et al.   Journal of Orthopaedic Surgery

Enhancement of osteogenesis on micro/nano-topographical carbon fiber-reinforced polyetheretherketone–nanohydroxyapatite biocomposite

(2015) Anxiu Xu et al.   Materials Science & Engineering C-Materials for Biological Applications

Fabrication and characterization of modified-hydroxyapatite/polyetheretherketone coating materials

(2014) Rui Ma et al.   APPLIED SURFACE SCIENCE

Multilevel surface engineering of nanostructured TiO2 on carbon-fiber-reinforced polyetheretherketone

(2014) Tao Lu et al.   BIOMATERIALS

A fast route to modify biopolymer surface: A study on polyetheretherketone (PEEK)

(2014) Huan Zhou et al.   MATERIALS LETTERS

The influence of nominal stress on wear factors of carbon fibre–reinforced polyetheretherketone (PEEK-OPTIMA® Wear Performance) against zirconia toughened alumina (Biolox®delta ceramic)

(2014) Andrew Evans et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE

Spine Interbody Implants: Material Selection and Modification, Functionalization and Bioactivation of Surfaces to Improve Osseointegration

(2014) Prashanth J Rao et al.   Orthopaedic Surgery

Biotribology of a new bearing material combination in a rotating hinge knee articulation

(2013) T.M. Grupp et al.   Acta Biomaterialia

Significance of calcium phosphate coatings for the enhancement of new bone osteogenesis – A review

(2013) Roman A. Surmenev et al.   Acta Biomaterialia

Osteoconductive hydroxyapatite coated PEEK for spinal fusion surgery

(2013) Byung-Dong Hahn et al.   APPLIED SURFACE SCIENCE

Cytocompatibility, osseointegration, and bioactivity of three-dimensional porous and nanostructured network on polyetheretherketone

(2013) Ying Zhao et al.   BIOMATERIALS

Multi-level finite element analysis for progressive damage behavior of HA/PEEK composite porous structure

(2013) C.Y. Tang et al.   COMPOSITES PART B-ENGINEERING

Processing and evaluation of bioactive coatings on polymeric implants

(2013) Afsaneh Rabiei et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A

Clinical experience using polyetheretherketone (PEEK) intervertebral structural cage for anterior cervical corpectomy and fusion

(2013) Manish K. Kasliwal et al.   JOURNAL OF CLINICAL NEUROSCIENCE

Polyetheretherketone/magnesium composite selectively coated with hydroxyapatite for enhanced in vitro bio-corrosion resistance and biocompatibility

(2013) Hyun-Do Jung et al.   MATERIALS LETTERS

Microstructure evolution and mechanical properties of a Ti–35Nb–3Zr–2Ta biomedical alloy processed by equal channel angular pressing (ECAP)

(2013) Zhengjie Lin et al.   Materials Science & Engineering C-Materials for Biological Applications

Potential Use of Porous Titanium–Niobium Alloy in Orthopedic Implants: Preparation and Experimental Study of Its Biocompatibility In Vitro

(2013) Jian Xu et al.   PLoS One

A tribological assessment of a PEEK based self-mating total cervical disc replacement

(2013) H. Xin et al.   WEAR

In vitro and in vivo evaluation of the bioactivity of hydroxyapatite-coated polyetheretherketone biocomposites created by cold spray technology

(2012) Jae Hyup Lee et al.   Acta Biomaterialia

Three-Year Prospective Clinical and Radiological Results of a New Flexible Horseshoe Acetabular Cup

(2012) Richard E. Field et al.   Hip International

In vivobiocompatibility and bioactivity ofin situsynthesized hydroxyapatite/polyetheretherketone composite materials

(2012) Rui Ma et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Wear Analysis of First-Generation Highly Cross-Linked Polyethylene in Primary Total Hip Arthroplasty

(2012) Shaun E. Reynolds et al.   JOURNAL OF ARTHROPLASTY

Wear of ceramic-on-carbon fiber-reinforced poly-ether ether ketone hip replacements

(2012) Claire L. Brockett et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS

Coating of carbon fiber-reinforced polyetheretherketone implants with titanium to improve bone apposition

(2012) Declan M. Devine et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS

Biotribological study of large diameter ceramic-on-CFR-PEEK hip joint including fluid uptake, wear and frictional heating

(2012) Qian Qian Wang et al.   JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE

Interfacial shear strength of bioactive-coated carbon fiber reinforced polyetheretherketone after in vivo implantation

(2012) Ichiro Nakahara et al.   JOURNAL OF ORTHOPAEDIC RESEARCH

In vivo implant fixation of carbon fiber-reinforced PEEK hip prostheses in an ovine model

(2012) Ichiro Nakahara et al.   JOURNAL OF ORTHOPAEDIC RESEARCH

Treatment of unstable posterior pelvic ring fracture with percutaneous reconstruction plate and percutaneous sacroiliac screws: a comparative study

(2012) Hong-wei Chen et al.   JOURNAL OF ORTHOPAEDIC SCIENCE

Biomechanical evaluation of various fixation methods for proximal extra-articular tibial fractures

(2012) Wei Feng et al.   JOURNAL OF SURGICAL RESEARCH

Carbon fiber reinforced PEEK Optima—A composite material biomechanical properties and wear/debris characteristics of CF-PEEK composites for orthopedic trauma implants

(2012) Ely L. Steinberg et al.   Journal of the Mechanical Behavior of Biomedical Materials

Composite based on polyetheretherketone reinforced with carbon fibres, an alternative to conventional materials for femoral implant: Manufacturing process and resulting structural behaviour

(2012) N. Boudeau et al.   MATERIALS & DESIGN

Investigation of metallic and carbon fibre PEEK fracture fixation devices for three-part proximal humeral fractures

(2012) Emer M. Feerick et al.   MEDICAL ENGINEERING & PHYSICS

Cell Adhesion to PEEK Treated by Plasma Immersion Ion Implantation and Deposition for Active Medical Implants

(2012) Firas Awaja et al.   Plasma Processes and Polymers

Investigation of the compressive stiffness of spinal cages in various experimental conditions based on finite element analysis

(2012) Yoon Hyuk Kim et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE

An investigation into PEEK-on-PEEK as a bearing surface candidate for cervical total disc replacement

(2012) Markus Kraft et al.   Spine Journal

Effects of contact pressure, molecular weight, and supplier on the wear behavior and transfer film of polyetheretherketone (PEEK)

(2012) K.A. Laux et al.   WEAR

Strengthening of CF/PEEK interface to improve the tribological performance in low amplitude oscillating wear mode

(2012) Mohit Sharma et al.   WEAR

Novel Surface Modifications of Carbon Fiber-Reinforced Polyetheretherketone Hip Stem in an Ovine Model

(2011) Ichiro Nakahara et al.   ARTIFICIAL ORGANS

2010 Mid-America Orthopaedic Association Physician in Training Award: Healing Complications Are Common After Locked Plating for Distal Femur Fractures

(2011) Christopher E. Henderson et al.   CLINICAL ORTHOPAEDICS AND RELATED RESEARCH

Third tubular versus 3.5-mm dynamic compression plates for fixation of diaphyseal fractures of the ulna: a prospective randomized trial

(2011) Mohammed Alkhayarin et al.   European Journal of Orthopaedic Surgery and Traumatology

Treatment of complex fractures of the distal radius: A prospective randomised comparison of external fixation ‘versus’ locked volar plating

(2011) J. Jeudy et al.   INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED

Characterization of in situ synthesized hydroxyapatite/polyetheretherketone composite materials

(2011) Rui Ma et al.   MATERIALS LETTERS

Characterization of polyetheretherketone–hydroxyapatite nanocomposite materials

(2011) Lin Wang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

A review of plasma-assisted methods for calcium phosphate-based coatings fabrication

(2011) Roman A. Surmenev   SURFACE & COATINGS TECHNOLOGY

Inflammatory response against different carbon fiber-reinforced PEEK wear particles compared with UHMWPE in vivo

(2010) Sandra Utzschneider et al.   Acta Biomaterialia

Biotribology of alternative bearing materials for unicompartmental knee arthroplasty

(2010) Thomas M. Grupp et al.   Acta Biomaterialia

The electron beam deposition of titanium on polyetheretherketone (PEEK) and the resulting enhanced biological properties

(2010) Cheol-Min Han et al.   BIOMATERIALS

Comminuted proximal Ulna fractures: injury pattern surgical techniques and outcome

(2010) Ali Mofidi et al.   European Journal of Orthopaedic Surgery and Traumatology

Improvement of the fatigue life of titanium alloys for biomedical devices through microstructural control

(2010) Mitsuo Niinomi et al.   Expert Review of Medical Devices

Proximal tibial fractures: early experience using polyaxial locking-plate technology

(2010) Vassilios S. Nikolaou et al.   INTERNATIONAL ORTHOPAEDICS

Mechanical properties and microstructure of polyetheretherketone–hydroxyapatite nanocomposite materials

(2010) Lin Wang et al.   MATERIALS LETTERS

Präklinische Ergebnisse beschichteter Knieimplantate für Allergiker

(2010) J. Reich et al.   ORTHOPADE

Minimally invasive locking screw plate fixation of non-articular proximal and distal tibia fractures

(2010) M. Ehlinger et al.   Orthopaedics & Traumatology-Surgery & Research

Hydroxyapatite whisker-reinforced polyetherketoneketone bone ingrowth scaffolds

(2009) Gabriel L. Converse et al.   Acta Biomaterialia

Mechanical properties and in vitro response of strontium-containing hydroxyapatite/polyetheretherketone composites

(2009) K.L. Wong et al.   BIOMATERIALS

Alternative bearing materials for intervertebral disc arthroplasty

(2009) Thomas M. Grupp et al.   BIOMATERIALS

The clinical and radiological outcomes of the LISS plate for distal femoral fractures: A systematic review

(2009) T.O. Smith et al.   INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED

Functional results and complications following locking palmar plating on the distal radius: a retrospective study

(2009) M. Hakimi et al.   Journal of Hand Surgery-European Volume

Mechanical properties of hydroxyapatite whisker reinforced polyetherketoneketone composite scaffolds

(2009) Gabriel L. Converse et al.   Journal of the Mechanical Behavior of Biomedical Materials

Usefulness of polyetheretherketone (PEEK) cage with plate augmentation for anterior arthrodesis in traumatic cervical spine injury

(2009) Kyung-Jin Song et al.   Spine Journal

The in vitro response of human osteoblasts to polyetheretherketone (PEEK) substrates compared to commercially pure titanium

(2008) Karen B. Sagomonyants et al.   BIOMATERIALS

Biomechanical evaluation of different fixation methods for fracture dislocation involving the proximal tibia

(2008) Rui Jiang et al.   CLINICAL BIOMECHANICS

Characterization of a Highly Cross-linked Ultrahigh Molecular-Weight Polyethylene in Clinical Use in Total Hip Arthroplasty

(2008) Michel P. Laurent et al.   JOURNAL OF ARTHROPLASTY

Computational assessment of constraint in total knee replacement

(2008) Matthew F. Moran et al.   JOURNAL OF BIOMECHANICS

Effects of bioactive glass and β-TCP containing three-dimensional laser sintered polyetheretherketone composites on osteoblastsin vitro

(2008) Cornelius von Wilmowsky et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A

Efficacy of anterior cervical fusion: Comparison of titanium cages, polyetheretherketone (PEEK) cages and autogenous bone grafts

(2008) Yu-Cheng Chou et al.   JOURNAL OF CLINICAL NEUROSCIENCE

Wear studies on the likely performance of CFR-PEEK/CoCrMo for use as artificial joint bearing materials

(2008) S. C. Scholes et al.   JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE

Pitch-based carbon-fibre-reinforced poly (ether—ether—ketone) OPTIMA® assessed as a bearing material in a mobile bearing unicondylar knee joint

(2008) S C Scholes et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE

Tribological assessment of a flexible carbon-fibre-reinforced poly(ether—ether—ketone) acetabular cup articulating against an alumina femoral head

(2008) S C Scholes et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE

Biomechanical evaluation and comparison of polyetheretherketone rod system to traditional titanium rod fixation

(2008) Ravi K. Ponnappan et al.   Spine Journal

Three dimensional shape optimization of total knee replacements for reduced wear

(2008) Ryan Willing et al.   STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION

Correlation of the tribological behaviors with the mechanical properties of poly-ether-ether-ketones (PEEKs) with different molecular weights and their fiber filled composites

(2008) G. Zhang et al.   WEAR