Convenient storage of concentrated hydrogen peroxide as a CaO2•2H2O2(s)/H2O2(aq) slurry for energy storage applications

Prior investigations have proposed, and successfully implemented, a stand-alone supply of aqueous hydrogen peroxide for use in fuel cells. An apparent obstacle for considering the use of aqueous hydrogen peroxide as an energy storage compound is the corrosive nature of the nominally required 50 wt.% maximum concentration. Here we propose storage of concentrated hydrogen peroxide in a high weight percent solid slurry, namely the equilibrium system of CaO2 center dot 2H(2)O(2)(s)/H2O2(aq), that mitigates much of the risk associated with the storage of such high concentrations. We have prepared and studied surrogate slurries of calcium hydroxide/water that are assumed to resemble the peroxo compound slurries. These slurries have the consistency of a paste rather than a distinct two-phase (liquid plus solid) system. This paste-like property of the prepared surrogates enable them to be contained within a 200 lines-per-inch. (LPI) nickel mesh screen (33.6% open area) with no solids leakage, and only liquid transport driven by an adsorbent material is placed in physical contact on the exterior of the screen. This hydrogen peroxide slurry approach suggests a convenient and safe mechanism of storing hydrogen peroxide for use in, say, vehicle applications. This is because fuel cell design requires only aqueous hydrogen peroxide use, that can be achieved using the separation approach utilizing the screen material here. This proposed method of storage should mitigate hazards associated with unintentional spills and leakage issues arising from aqueous solution use. (C) 2011 Elsevier Ltd. All rights reserved.