Light-Metal Foams-History of Innovation and Technological Challenges

Partial decomposition of TiH2 studied in situ by energy-dispersive diffraction and ex situ by diffraction microtomography of hard X-ray synchrotron radiation

(2012) C. Jiménez et al.   SCRIPTA MATERIALIA

Decomposition of TiH2 studied in situ by synchrotron X-ray and neutron diffraction

(2011) C. Jiménez et al.   ACTA MATERIALIA

Foaming behavior of powder metallurgical Al–Sn foams

(2011) Lydia Y. Aguirre-Perales et al.   ACTA MATERIALIA

Aluminum Integral Foams with Near-Microcellular Structure

(2011) Johannes Hartmann et al.   ADVANCED ENGINEERING MATERIALS

Gold and Gold Alloy foams

(2011) John Banhart   GOLD BULLETIN

A study of Mg and Cu additions on the foaming behaviour of Al–Si alloys

(2011) H.-M. Helwig et al.   JOURNAL OF MATERIALS SCIENCE

Carbonates as Foaming Agent in Chip-based Aluminium Foam Precursor

(2011) Marco Haesche et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Preparation of aluminum foam sandwich by rolling-bonding/powder metallurgy foaming technology

(2011) Guoyin Zu et al.   JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION

Stabilizing intermetallic phases within aluminum foam

(2011) M. Nosko et al.   MATERIALS LETTERS

Foaming Agents for Powder Metallurgy Production of Aluminum Foam

(2011) Takuya Koizumi et al.   MATERIALS TRANSACTIONS

Relationship between Foam Stabilization and Physical Properties of Particles on Aluminum Foam Production

(2011) Kota Kadoi et al.   MATERIALS TRANSACTIONS

Foamability of MgAl2O4 (Spinel)-Reinforced Aluminum Alloy Composites

(2011) G. S. Vinod kumar et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Effect of Sn on the Dehydrogenation Process of TiH2 in Al Foams

(2011) Lydia Y. Aguirre-Perales et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Effects of Mg addition on foam stability of Al foams made by powder metallurgy route

(2011) L Wang et al.   POWDER METALLURGY

Preparation and characterization of aluminum foams with ZrH2 as foaming agent

(2011) Da-wu LI et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Method of Preventing Shrinkage of Aluminum Foam Using Carbonates

(2011) Takuya Koizumi et al.   Metals

Metal Foaming Investigated by X-ray Radioscopy

(2011) Francisco Garcia-Moreno et al.   Metals

Solidification of metal foams

(2010) M. Mukherjee et al.   ACTA MATERIALIA

Mechanical Characterization of Particulate Aluminum Foams-Strain-Rate, Density and Matrix Alloy versus Adhesive Effects

(2010) Dirk Lehmhus et al.   ADVANCED ENGINEERING MATERIALS

Al and Zn Foams Blown by an Intrinsic Gas Source

(2010) M. Mukherjee et al.   ADVANCED ENGINEERING MATERIALS

Effect of elemental powder blending ratio on combustion foaming behavior of porous Al–Ti intermetallics and Al3Ti/Al composites

(2010) Makoto Kobashi et al.   INTERMETALLICS

Metal foams – towards microcellular materials

(2010) Francisco García-Moreno et al.   International Journal of Materials Research

Foam stability in gas injection foaming process

(2010) Xing Nan Liu et al.   JOURNAL OF MATERIALS SCIENCE

A novel method for producing Al-foams and evaluation of their compression behavior

(2010) D. P. Papadopoulos et al.   JOURNAL OF POROUS MATERIALS

Foaming experiments on LM25 alloy reinforced with SiC particulates

(2010) N.V. Ravi Kumar et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Compressive properties of cellular Mg foams fabricated by melt-foaming method

(2010) Dong-Hui Yang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Nondestructive Observation of Pore Structures of A1050 Porous Aluminum Fabricated by Friction Stir Processing

(2010) Yoshihiko Hangai et al.   MATERIALS TRANSACTIONS

Fabrication of Al-3.7 Pct Si-0.18 Pct Mg Foam Strengthened by AlN Particle Dispersion and its Compressive Properties

(2010) Yeong Hwan Song et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Defect generation during solidification of aluminium foams

(2010) M. Mukherjee et al.   SCRIPTA MATERIALIA

Early pore formation in aluminium foams studied by synchrotron-based microtomography and 3-D image analysis

(2009) A. Rack et al.   ACTA MATERIALIA

Compressive deformation and energy absorption characteristics of closed cell aluminum-fly ash particle composite foam

(2009) D.P. Mondal et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Fabrication of Porous Aluminum Using Gases Intrinsically Contained in Aluminum Alloy Die Castings

(2009) Yoshihiko Hangai et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Improvement of aluminium foaming by powder consolidation under vacuum

(2009) C. Jiménez et al.   SCRIPTA MATERIALIA

Structure and distribution of oxides in aluminium foam

(2008) Alexander Dudka et al.   ACTA MATERIALIA

Production of Aluminum Foams with Ni-coated TiH2Powder

(2008) P. M. Proa-Flores et al.   ADVANCED ENGINEERING MATERIALS

High Pressure Integral Foam Moulding of Aluminium – Process Technology

(2008) H. Wiehler et al.   ADVANCED ENGINEERING MATERIALS

Fabrication of Lotus-type Porous Metals through Hydride Decomposition

(2008) H. Nakajima   ADVANCED ENGINEERING MATERIALS

The Effect of TiH2Particle Size on the Morphology of Al-Foam Produced by PM Process

(2008) A. Ibrahim et al.   ADVANCED ENGINEERING MATERIALS

Aluminium Foam Sandwich Panels: Manufacture, Metallurgy and Applications

(2008) J. Banhart et al.   ADVANCED ENGINEERING MATERIALS

Foaming Behavior of Aluminum Precursor Produced from Machined Chip Waste

(2008) N. Kanetake et al.   ADVANCED ENGINEERING MATERIALS

Manufacturing of Al–Mg–Si alloy foam using calcium carbonate as foaming agent

(2008) L.E.G. Cambronero et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Foaming behavior of Ti6Al4V particle-added aluminum powder compacts

(2008) N. D. Karsu et al.   JOURNAL OF MATERIALS SCIENCE

Simulation of aluminum foam formation and distribution uniformity

(2008) Wang Deqing et al.   JOURNAL OF MATERIALS SCIENCE

Preparation of three-dimensional shaped aluminum alloy foam by two-step foaming

(2008) J.T. Shang et al.   Materials Science and Engineering B-Advanced Functional Solid-State Materials

Expansion Mechanisms in Foaming Aluminum Melts

(2008) Zhenlun Song et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Fabrication of Porous Aluminum by Friction Stir Processing

(2008) Yoshihiko Hangai et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Thermal evolution of titanium hydride optimized for aluminium foam fabrication

(2008) M.T. Malachevsky et al.   SCRIPTA MATERIALIA

Study on fabrication and foaming mechanism of Mg foam using CaCO3 as blowing agent

(2007) Dong-Hui Yang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effects of strain rate and SiC particle on the compressive property of SiCp/AlSi9Mg composite foams

(2007) Sirong Yu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Influence of particle additions on the foaming behaviour of AlSi11/TiH2 composites made by semi-solid processing

(2007) Marco Haesche et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING