Writable and patternable organic solar cells and modules inspired by an old Chinese calligraphy tradition

High-performance ternary organic solar cells with thick active layer exceeding 11% efficiency

(2017) Nicola Gasparini et al.   Energy & Environmental Science

Enhancing Performance of Large-Area Organic Solar Cells with Thick Film via Ternary Strategy

(2017) Jianqi Zhang et al.   Small

Roll-to-Roll Printed Large-Area All-Polymer Solar Cells with 5% Efficiency Based on a Low Crystallinity Conjugated Polymer Blend

(2017) Xiaodan Gu et al.   Advanced Energy Materials

Flexible large-area organic tandem solar cells with high defect tolerance and device yield

(2017) Lin Mao et al.   Journal of Materials Chemistry A

A Versatile Self-Organization Printing Method for Simplified Tandem Organic Photovoltaics

(2016) Seok Kim et al.   ADVANCED FUNCTIONAL MATERIALS

Fullerene-Free Polymer Solar Cells with over 11% Efficiency and Excellent Thermal Stability

(2016) Wenchao Zhao et al.   ADVANCED MATERIALS

Highly efficient, large area, roll coated flexible and rigid OPV modules with geometric fill factors up to 98.5% processed with commercially available materials

(2016) L. Lucera et al.   Energy & Environmental Science

Side-Chain Isomerization on an n-type Organic Semiconductor ITIC Acceptor Makes 11.77% High Efficiency Polymer Solar Cells

(2016) Yankang Yang et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Non-Fullerene Polymer Solar Cells Based on Alkylthio and Fluorine Substituted 2D-Conjugated Polymers Reach 9.5% Efficiency

(2016) Haijun Bin et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Efficient Colorful Perovskite Solar Cells Using a Top Polymer Electrode Simultaneously as Spectrally Selective Antireflection Coating

(2016) Youyu Jiang et al.   NANO LETTERS

Solution-based electrical doping of semiconducting polymer films over a limited depth

(2016) Vladimir A. Kolesov et al.   NATURE MATERIALS

11.4% Efficiency non-fullerene polymer solar cells with trialkylsilyl substituted 2D-conjugated polymer as donor

(2016) Haijun Bin et al.   Nature Communications

Flexible all-solution-processed all-plastic multijunction solar cells for powering electronic devices

(2016) Jinhui Tong et al.   Materials Horizons

Development of polymer–fullerene solar cells

(2016) Fengling Zhang et al.   National Science Review

Conductivity Enhancement of PEDOT:PSS Films via Phosphoric Acid Treatment for Flexible All-Plastic Solar Cells

(2015) Wei Meng et al.   ACS Applied Materials & Interfaces

“Layer-Filter Threshold” Technique for Near-Infrared Laser Ablation in Organic Semiconductor Device Processing

(2015) Feng Ye et al.   ADVANCED FUNCTIONAL MATERIALS

An Electron Acceptor Challenging Fullerenes for Efficient Polymer Solar Cells

(2015) Yuze Lin et al.   ADVANCED MATERIALS

Fully printed organic tandem solar cells using solution-processed silver nanowires and opaque silver as charge collecting electrodes

(2015) Fei Guo et al.   Energy & Environmental Science

Chinese brushes: From controllable liquid manipulation to template-free printing microlines

(2015) Qianbin Wang et al.   Nano Research

Efficient polymer solar cells employing a non-conjugated small-molecule electrolyte

(2015) Xinhua Ouyang et al.   Nature Photonics

Single-junction polymer solar cells with high efficiency and photovoltage

(2015) Zhicai He et al.   Nature Photonics

Optical properties and conductivity of PEDOT:PSS films treated by polyethylenimine solution for organic solar cells

(2015) Zaifang Li et al.   ORGANIC ELECTRONICS

Organic Photovoltaic Cells: From Performance Improvement to Manufacturing Processes

(2015) Hongseok Youn et al.   Small

A nonionic surfactant simultaneously enhancing wetting property and electrical conductivity of PEDOT:PSS for vacuum-free organic solar cells

(2015) Zaifang Li et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Flow-enhanced solution printing of all-polymer solar cells

(2015) Ying Diao et al.   Nature Communications

High-performance ternary blend polymer solar cells involving both energy transfer and hole relay processes

(2015) Luyao Lu et al.   Nature Communications

A generic concept to overcome bandgap limitations for designing highly efficient multi-junction photovoltaic cells

(2015) Fei Guo et al.   Nature Communications

Dual Functional Zwitterionic Fullerene Interlayer for Efficient Inverted Polymer Solar Cells

(2015) Yao Liu et al.   Advanced Energy Materials

Following the Morphology Formation In Situ in Printed Active Layers for Organic Solar Cells

(2015) Stephan Pröller et al.   Advanced Energy Materials

Depositing Fullerenes in Swollen Polymer Layers via Sequential Processing of Organic Solar Cells

(2015) Jacobus J. van Franeker et al.   Advanced Energy Materials

High efficiency, fully inkjet printed organic solar cells with freedom of design

(2015) T. M. Eggenhuisen et al.   Journal of Materials Chemistry A

Solution-Processed Parallel Tandem Polymer Solar Cells Using Silver Nanowires as Intermediate Electrode

(2014) Fei Guo et al.   ACS Nano

Bio-Inspired Multistructured Conical Copper Wires for Highly Efficient Liquid Manipulation

(2014) Qianbin Wang et al.   ACS Nano

Simplified Tandem Polymer Solar Cells with an Ideal Self-Organized Recombination Layer

(2014) Hongkyu Kang et al.   ADVANCED MATERIALS

Chinese Brushes: Controllable Liquid Transfer in Ratchet Conical Hairs

(2014) Qianbin Wang et al.   ADVANCED MATERIALS

Single-Junction Polymer Solar Cells Exceeding 10% Power Conversion Efficiency

(2014) Jing-De Chen et al.   ADVANCED MATERIALS

Flexible organic tandem solar modules with 6% efficiency: combining roll-to-roll compatible processing with high geometric fill factors

(2014) G. D. Spyropoulos et al.   Energy & Environmental Science

Solution coating of large-area organic semiconductor thin films with aligned single-crystalline domains

(2013) Ying Diao et al.   NATURE MATERIALS

Slot-die coating parameters of the low-viscosity bulk-heterojunction materials used for polymer solarcells

(2013) Soonil Hong et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

High performance polymeric charge recombination layer for organic tandem solar cells

(2012) Yinhua Zhou et al.   Energy & Environmental Science

A Universal Method to Produce Low-Work Function Electrodes for Organic Electronics

(2012) Y. Zhou et al.   SCIENCE

Roll-to-Roll Inkjet Printing and Photonic Sintering of Electrodes for ITO Free Polymer Solar Cell Modules and Facile Product Integration

(2012) Dechan Angmo et al.   Advanced Energy Materials

Paper Electronics

(2011) Daniel Tobjörk et al.   ADVANCED MATERIALS

Inkjet Printing-Process and Its Applications

(2009) Madhusudan Singh et al.   ADVANCED MATERIALS

High‐Performance Organic Thin‐Film Transistors through Solution‐Sheared Deposition of Small‐Molecule Organic Semiconductors

(2008) Héctor A. Becerril et al.   ADVANCED MATERIALS

An inverted organic solar cell employing a sol-gel derived ZnO electron selective layer and thermal evaporated MoO3 hole selective layer

(2008) A. K. K. Kyaw et al.   APPLIED PHYSICS LETTERS

Fabrication and processing of polymer solar cells: A review of printing and coating techniques

(2008) Frederik C. Krebs   SOLAR ENERGY MATERIALS AND SOLAR CELLS