Enhanced Low Temperature NO Reduction Performance via MnOx-Fe2O3/Vermiculite Monolithic Honeycomb Catalysts

Sulfur and Water Resistance of Mn-Based Catalysts for Low-Temperature Selective Catalytic Reduction of NOx: A Review

(2018) Chen Gao et al.   Catalysts

Cerium-loaded MnO x /attapulgite catalyst for the low-temperature NH 3 -selective catalytic reduction

(2017) Aijuan Xie et al.   JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY

A general strategy for the in situ decoration of porous Mn–Co bi-metal oxides on metal mesh/foam for high performance de-NOx monolith catalysts

(2017) Sixiang Cai et al.   Nanoscale

Synthesis of MnNi–SAPO-34 by a one-pot hydrothermal method and its excellent performance for the selective catalytic reduction of NO by NH3

(2017) Rui Li et al.   Catalysis Science & Technology

Construction of hybrid multi-shell hollow structured CeO2–MnOx materials for selective catalytic reduction of NO with NH3

(2017) Kaili Ma et al.   RSC Advances

Low-Temperature Selective Catalytic Reduction of NO with NH3 over Mn2O3-Doped Fe2O3 Hexagonal Microsheets

(2016) Yi Li et al.   ACS Applied Materials & Interfaces

Manganese oxide-based catalysts for low-temperature selective catalytic reduction of NO x with NH 3 : A review

(2016) Chang Liu et al.   APPLIED CATALYSIS A-GENERAL

In situ DRIFTs investigation of the reaction mechanism over MnO x -MO y /Ce 0.75 Zr 0.25 O 2 (M = Fe, Co, Ni, Cu) for the selective catalytic reduction of NO x with NH 3

(2016) Hang Hu et al.   APPLIED SURFACE SCIENCE

MnO x -CeO 2 shell-in-shell microspheres for NH 3 -SCR de-NO x at low temperature

(2016) Chang Liu et al.   CATALYSIS COMMUNICATIONS

Effect of MnO 2 polymorphs structure on the selective catalytic reduction of NO x with NH 3 over TiO 2 –Palygorskite

(2016) Shiping Luo et al.   CHEMICAL ENGINEERING JOURNAL

The monolithic cordierite supported V 2 O 5 –MoO 3 /TiO 2 catalyst for NH 3 -SCR

(2016) Yue Qiu et al.   CHEMICAL ENGINEERING JOURNAL

Low-temperature SCR of NOx by NH3 over MnOx/SAPO-34 prepared by two different methods: a comparative study

(2016) Chenglong Yu et al.   ENVIRONMENTAL TECHNOLOGY

High efficient nickel/vermiculite catalyst prepared via microwave irradiation-assisted synthesis for carbon monoxide methanation

(2016) Panpan Li et al.   FUEL

Novel manganese oxide confined interweaved titania nanotubes for the low-temperature Selective Catalytic Reduction (SCR) of NO x by NH 3

(2016) Dimitrios K. Pappas et al.   JOURNAL OF CATALYSIS

Design of multi-shell Fe2O3@MnOx@CNTs for the selective catalytic reduction of NO with NH3: improvement of catalytic activity and SO2 tolerance

(2016) Sixiang Cai et al.   Nanoscale

Fe-doped Beta zeolite from organotemplate-free synthesis for NH3-SCR of NOx

(2016) Yongjun Zhu et al.   Catalysis Science & Technology

Impact of nitrogen oxides on the environment and human health: Mn-based materials for the NO x abatement

(2016) Thirupathi Boningari et al.   Current Opinion in Chemical Engineering

Impact of sulfation and desulfation on NO x reduction using Cu-chabazite SCR catalysts

(2015) D. William Brookshear et al.   CATALYSIS TODAY

Hydrochlorination of acetylene using expanded multilayered vermiculite (EML-VMT)-supported catalysts

(2015) Xin-Huang et al.   CHINESE CHEMICAL LETTERS

Influence of SiO2 on M/TiO2 (M = Cu, Mn, and Ce) Formulations for Low-Temperature Selective Catalytic Reduction of NOx with NH3: Surface Properties and Key Components in Relation to the Activity of NOx Reduction

(2015) Thirupathi Boningari et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Influence of elevated surface texture hydrated titania on Ce-doped Mn/TiO 2 catalysts for the low-temperature SCR of NO x under oxygen-rich conditions

(2015) Thirupathi Boningari et al.   JOURNAL OF CATALYSIS

ZrO2 Modified MnOx/Attapulgite Catalysts for NH3-SCR of NO at Low Temperature

(2015) Feng Xiao et al.   JOURNAL OF CHEMICAL ENGINEERING OF JAPAN

Sulfur-Tolerant Mn-Ce-Ti Sorbents for Elemental Mercury Removal from Flue Gas: Mechanistic Investigation by XPS

(2015) Gunugunuri K. Reddy et al.   Journal of Physical Chemistry C

Low-temperature selective catalytic reduction of NO over carbon nanotubes supported MnO2 fabricated by co-precipitation method

(2015) Xiulian Lu et al.   Micro & Nano Letters

Development of highly active coated monolith SCR catalyst with strong abrasion resistance for low-temperature application

(2015) Lina Gan et al.   Frontiers of Environmental Science & Engineering

Novel Mn–Ce–Ti Mixed-Oxide Catalyst for the Selective Catalytic Reduction of NOx with NH3

(2014) Zhiming Liu et al.   ACS Applied Materials & Interfaces

Effects of calcination temperature on Mn species and catalytic activities of Mn/ZSM-5 catalyst for selective catalytic reduction of NO with ammonia

(2014) Xiaorong Lou et al.   APPLIED SURFACE SCIENCE

Low-temperature selective catalytic reduction of NO x with NH3 over Fe–Cu mixed oxide/ZSM-5 catalysts containing Fe2CuO4 phase

(2014) Jie Zhang et al.   RESEARCH ON CHEMICAL INTERMEDIATES

Monolithic Cr–V/TiO2/cordierite catalysts prepared by in-situ precipitation and impregnation for low-temperature NH3-SCR reactions

(2013) Hai-feng Huang et al.   CATALYSIS COMMUNICATIONS

Preparation of MnOx–CeO2–Al2O3 mixed oxides for NOx-assisted soot oxidation: Activity, structure and thermal stability

(2013) Fan Lin et al.   CHEMICAL ENGINEERING JOURNAL

Low-temperature selective catalytic reduction of NO with NH3 over nanoflaky MnOx on carbon nanotubes in situ prepared via a chemical bath deposition route

(2013) Cheng Fang et al.   Nanoscale

NH3 pulsing adsorption and SCR reactions over a Cu-CHA SCR catalyst

(2012) Xuxian Hou et al.   CATALYSIS TODAY

Investigation of the selective catalytic reduction of nitric oxide with ammonia over Mn/TiO2 catalysts through transient isotopic labeling and in situ FT-IR studies

(2012) Padmanabha Reddy Ettireddy et al.   JOURNAL OF CATALYSIS

Nickel-doped Mn/TiO2 as an efficient catalyst for the low-temperature SCR of NO with NH3: Catalytic evaluation and characterizations

(2012) Boningari Thirupathi et al.   JOURNAL OF CATALYSIS

Co-doping a metal (Cr, Fe, Co, Ni, Cu, Zn, Ce, and Zr) on Mn/TiO2 catalyst and its effect on the selective reduction of NO with NH3 at low-temperatures

(2011) Boningari Thirupathi et al.   APPLIED CATALYSIS B-ENVIRONMENTAL

Low-temperature selective catalytic reduction of NOx with NH3 over metal oxide and zeolite catalysts—A review

(2011) Junhua Li et al.   CATALYSIS TODAY

Thermal durability of Cu-CHA NH3-SCR catalysts for diesel NOx reduction

(2011) Steven J. Schmieg et al.   CATALYSIS TODAY

Low-Temperature Selective Catalytic Reduction of NOx with NH3 over Fe–Mn Mixed-Oxide Catalysts Containing Fe3Mn3O8 Phase

(2011) Zhihang Chen et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Selective catalytic reduction of NO with NH3 over Mn–Fe/USY under lean burn conditions

(2010) Qichun Lin et al.   CATALYSIS TODAY

Iron-doped Mn-Ce/TiO2 catalyst for low temperature selective catalytic reduction of NO with NH3

(2010) Boxiong Shen et al.   JOURNAL OF ENVIRONMENTAL SCIENCES

Low-temperature selective catalytic reduction of NO with NH3 over MnCe oxides supported on TiO2 and Al2O3: A comparative study

(2009) Ruiben Jin et al.   CHEMOSPHERE

Montmorillonite, vermiculite and saponite based porous clay heterostructures modified with transition metals as catalysts for the DeNOx process

(2008) Lucjan Chmielarz et al.   APPLIED CATALYSIS B-ENVIRONMENTAL

Relationship between temperature-programmed reduction profile and activity of modified ferrite-based catalysts for WGS reaction

(2007) Ataullah Khan et al.   JOURNAL OF MOLECULAR CATALYSIS A-CHEMICAL