Towards More Sustainable Material Formulations: A Comparative Assessment of PA11-SGW Flexural Performance versus Oil-Based Composites

Influence of PA11 and PP thermoplastic polymers on recycling stability of unidirectional flax fibre reinforced biocomposites

(2017) Clément Gourier et al.   POLYMER DEGRADATION AND STABILITY

Effect of Sodium Hydroxide Treatments on the Tensile Strength and the Interphase Quality of Hemp Core Fiber-Reinforced Polypropylene Composites

(2017) Romina Del Rey et al.   Polymers

Evaluation of Thermal and Thermomechanical Behaviour of Bio-Based Polyamide 11 Based Composites Reinforced with Lignocellulosic Fibres

(2017) Helena Oliver-Ortega et al.   Polymers

Starch-Based Biopolymer Reinforced with High Yield Fibers from Sugarcane Bagasse as a Technical and Environmentally Friendly Alternative to High Density Polyethylene

(2016) Ana M. Jiménez et al.   BioResources

Sustainable and lightweight biopolyamide hybrid composites for greener auto parts

(2016) Shaghayegh Armioun et al.   CANADIAN JOURNAL OF CHEMICAL ENGINEERING

Why do we observe significant differences between measured and ‘back-calculated’ properties of natural fibres?

(2016) Darshil U. Shah et al.   CELLULOSE

Semichemical fibres of Leucaena collinsii reinforced polypropylene composites: Flexural characterisation, impact behaviour and water uptake properties

(2016) L.A. Granda et al.   COMPOSITES PART B-ENGINEERING

Towards a good interphase between bleached kraft softwood fibers and poly(lactic) acid

(2016) L.A. Granda et al.   COMPOSITES PART B-ENGINEERING

Enhancing the impact and flexural strength of PP/LLDPE/TiO2/SEBS nano-composites by using Taguchi methodology

(2016) Mohsen Ayaz et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Tensile properties and micromechanical analysis of stone groundwood from softwood reinforced bio-based polyamide11 composites

(2016) H. Oliver-Ortega et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Natural fiber nonwoven reinforced cement composites as sustainable materials for building envelopes

(2016) Josep Claramunt et al.   CONSTRUCTION AND BUILDING MATERIALS

Stiffness of bio-based polyamide 11 reinforced with softwood stone ground-wood fibres as an alternative to polypropylene-glass fibre composites

(2016) H. Oliver-Ortega et al.   EUROPEAN POLYMER JOURNAL

Influence of processing temperature on mechanical performance of unidirectional polyamide 11–flax fibre composites

(2016) Alain Bourmaud et al.   INDUSTRIAL CROPS AND PRODUCTS

Biopolyamide hybrid composites for high performance applications

(2016) Shaghayegh Armioun et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Biobased Polyamides: Recent Advances in Basic and Applied Research

(2016) Malte Winnacker et al.   MACROMOLECULAR RAPID COMMUNICATIONS

Heat treated wood–nylon 6 composites

(2015) Deniz Aydemir et al.   COMPOSITES PART B-ENGINEERING

Flexural properties of fully biodegradable alpha-grass fibers reinforced starch-based thermoplastics

(2015) F.X. Espinach et al.   COMPOSITES PART B-ENGINEERING

Mechanical behaviour and practical adhesion at a bamboo composite interface: Physical adhesion and mechanical interlocking

(2015) C.A. Fuentes et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Characterization of carbon fiber surfaces and their impact on the mechanical properties of short carbon fiber reinforced polypropylene composites

(2015) Christoph Unterweger et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Acoustic properties of agroforestry waste orange pruning fibers reinforced polypropylene composites as an alternative to laminated gypsum boards

(2015) R. Reixach et al.   CONSTRUCTION AND BUILDING MATERIALS

Polypropylene biocomposites reinforced with softwood, abaca, jute, and kenaf fibers

(2015) A.K. Bledzki et al.   INDUSTRIAL CROPS AND PRODUCTS

Sustainable eco-composites obtained from agricultural and urban waste plastic blends and residual cellulose fibers

(2015) J. Martínez Urreaga et al.   JOURNAL OF CLEANER PRODUCTION

Influence of Thermal Treatment on Mechanical and Morphological Characteristics of Polyamide 11/Cellulose Nanofiber Nanocomposites

(2015) Denis Mihaela Panaitescu et al.   Journal of Nanomaterials

BIO-BASED COMPOSITES FROM STONE GROUNDWOOD APPLIED TO NEW PRODUCT DEVELOPMENT

(2014) Fernando Julian et al.   BioResources

ACOUSTIC PROPERTIES OF POLYPROPYLENE COMPOSITES REINFORCED WITH STONE GROUNDWOOD

(2014) Joan Pere López et al.   BioResources

High Stiffness Performance Alpha-Grass Pulp Fiber Reinforced Thermoplastic Starch-Based Fully Biodegradable Composites

(2014) Francesc X. Espinach et al.   BioResources

Bio-based polyamides reinforced with cellulosic fibres – Processing and properties

(2014) Maik Feldmann et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Bio-based polyamide 11: Synthesis, rheology and solid-state properties of star structures

(2014) Lucrezia Martino et al.   EUROPEAN POLYMER JOURNAL

Flexural and impact properties of all-cellulose composite laminates

(2013) Tim Huber et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Biocomposites from Starch-based Biopolymer and Rape Fibers. Part II: Stiffening, Flexural and Impact Strength, and Product Development

(2013) Eva Espigule et al.   CURRENT ORGANIC CHEMISTRY

Study on the technical feasibility of replacing glass fibers by old newspaper recycled fibers as polypropylene reinforcement

(2013) A. Serrano et al.   JOURNAL OF CLEANER PRODUCTION

Impact and flexural properties of stone-ground wood pulp-reinforced polypropylene composites

(2013) J.P. López et al.   POLYMER COMPOSITES

The use of polymeric amines to enhance the mechanical properties of lignocellulosic fibrous networks

(2012) Andrew Marais et al.   CELLULOSE

Analysis of tensile and flexural modulus in hemp strands/polypropylene composites

(2012) F.X. Espinach et al.   COMPOSITES PART B-ENGINEERING

Tensile, flexural and torsional properties of chemically treated alfa, coir and bagasse reinforced polypropylene

(2012) F.Z. Arrakhiz et al.   COMPOSITES PART B-ENGINEERING

Single-Plant Biocomposite from Ricinus Communis: Preparation, Properties and Environmental Performance

(2012) M. T. Heitzmann et al.   JOURNAL OF POLYMERS AND THE ENVIRONMENT

Quantitative Water Uptake Study in Thin Nylon-6 Films with NMR Imaging

(2012) N. J. W. Reuvers et al.   MACROMOLECULES

Biocomposites reinforced with natural fibers: 2000–2010

(2012) Omar Faruk et al.   PROGRESS IN POLYMER SCIENCE

Restructuring the Crystalline Cellulose Hydrogen Bond Network Enhances Its Depolymerization Rate

(2011) Shishir P. S. Chundawat et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Strength of single- and double-gated injection moulded short glass fibre reinforced polycarbonate

(2011) S Hashemi   JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS

Biocomposites from Musa textilis and polypropylene: Evaluation of flexural properties and impact strength

(2010) J. Gironès et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Analysis of tensile and flexural strengths of single and double gated injection moulded short glass fibre reinforced PBT/PC composites

(2010) S. Hashemi et al.   PLASTICS RUBBER AND COMPOSITES

Biocomposites from abaca strands and polypropylene. Part I: Evaluation of the tensile properties

(2009) Fabiola Vilaseca et al.   BIORESOURCE TECHNOLOGY

Ecodesign of automotive components making use of natural jute fiber composites

(2009) C. Alves et al.   JOURNAL OF CLEANER PRODUCTION

Wood–plastic composites as promising green-composites for automotive industries!

(2007) Alireza Ashori   BIORESOURCE TECHNOLOGY