Bleached Kraft Eucalyptus Fibers as Reinforcement of Poly(Lactic Acid) for the Development of High-Performance Biocomposites

Starch-Based Biopolymer Reinforced with High Yield Fibers from Sugarcane Bagasse as a Technical and Environmentally Friendly Alternative to High Density Polyethylene

(2016) Ana M. Jiménez et al.   BioResources

Tensile Strength Assessment of Injection-Molded High Yield Sugarcane Bagasse-Reinforced Polypropylene

(2016) Ana M. Jiménez et al.   BioResources

Why do we observe significant differences between measured and ‘back-calculated’ properties of natural fibres?

(2016) Darshil U. Shah et al.   CELLULOSE

Semichemical fibres of Leucaena collinsii reinforced polypropylene: Macromechanical and micromechanical analysis

(2016) L.A. Granda et al.   COMPOSITES PART B-ENGINEERING

Semichemical fibres of Leucaena collinsii reinforced polypropylene composites: Young's modulus analysis and fibre diameter effect on the stiffness

(2016) L.A. Granda et al.   COMPOSITES PART B-ENGINEERING

Towards a good interphase between bleached kraft softwood fibers and poly(lactic) acid

(2016) L.A. Granda et al.   COMPOSITES PART B-ENGINEERING

Tensile properties and micromechanical analysis of stone groundwood from softwood reinforced bio-based polyamide11 composites

(2016) H. Oliver-Ortega et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Stiffness of bio-based polyamide 11 reinforced with softwood stone ground-wood fibres as an alternative to polypropylene-glass fibre composites

(2016) H. Oliver-Ortega et al.   EUROPEAN POLYMER JOURNAL

Tensile and flexural properties of polylactic acid-based hybrid green composites reinforced by kenaf, bamboo and coir fibers

(2016) Rosni Binti Yusoff et al.   INDUSTRIAL CROPS AND PRODUCTS

Tensile Properties of Polypropylene Composites Reinforced with Mechanical, Thermomechanical, and Chemi-Thermomechanical Pulps from Orange Pruning

(2015) Rafel Reixach et al.   BioResources

The influence of Spartium junceum L. fibres modified with montmorrilonite nanoclay on the thermal properties of PLA biocomposites

(2015) Zorana Kovacevic et al.   COMPOSITES PART B-ENGINEERING

ACOUSTIC PROPERTIES OF POLYPROPYLENE COMPOSITES REINFORCED WITH STONE GROUNDWOOD

(2014) Joan Pere López et al.   BioResources

Micromechanics of Mechanical, Thermomechanical, and Chemi-Thermomechanical Pulp from Orange Tree Pruning as Polypropylene Reinforcement: A Comparative Study

(2014) Rafel Reixach et al.   BioResources

Study on the technical feasibility of replacing glass fibers by old newspaper recycled fibers as polypropylene reinforcement

(2013) A. Serrano et al.   JOURNAL OF CLEANER PRODUCTION

Macro and micromechanics analysis of short fiber composites stiffness: The case of old newspaper fibers–polypropylene composites

(2013) A. Serrano et al.   MATERIALS & DESIGN

Modeling of the tensile moduli of mechanical, thermomechanical, and chemi-thermomechanical pulps from orange tree pruning

(2013) Rafel Reixach et al.   POLYMER COMPOSITES

Surface and porous characterisation of activated carbons made from a novel biomass precursor, the esparto grass

(2012) J.M. Valente Nabais et al.   APPLIED SURFACE SCIENCE

Analysis of tensile and flexural modulus in hemp strands/polypropylene composites

(2012) F.X. Espinach et al.   COMPOSITES PART B-ENGINEERING

Micromechanics of hemp strands in polypropylene composites

(2012) M.E. Vallejos et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Lignocellulosic byproducts as filler in polypropylene: Comprehensive study on the effects of compatibilization and loading

(2012) Michael A. Fuqua et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Green composites: A brief review

(2011) F.P. La Mantia et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Enhancement of tensile strength of lignocellulosic jute fibers by alkali-steam treatment

(2010) Prosenjit Saha et al.   BIORESOURCE TECHNOLOGY

Numerical Modeling of Tensile Behavior of Fiber-reinforced Polymer Composites

(2010) F. Wang et al.   JOURNAL OF COMPOSITE MATERIALS

Effect of Compatibilizer on Mechanical, Morphological, and Thermal Properties of Chemimechanical Pulp-reinforced PP Composites

(2010) S. M. Zabihzadeh et al.   JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS

Biocomposites from abaca strands and polypropylene. Part I: Evaluation of the tensile properties

(2009) Fabiola Vilaseca et al.   BIORESOURCE TECHNOLOGY

Mechanical properties of PLA composites with man-made cellulose and abaca fibres

(2009) Andrzej K. Bledzki et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Determination of interfacial shear strength of white rot fungi treated hemp fibre reinforced polypropylene

(2009) Yan Li et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Impact and tensile properties of PLA/Cordenka and PLA/flax composites

(2008) Benjamin Bax et al.   COMPOSITES SCIENCE AND TECHNOLOGY