Effect of Mold Opening Process on Microporous Structure and Properties of Microcellular Polylactide–Polylactide Nanocomposites

Effect of the melt compressibility and the pressure drop rate on the cell-nucleation behavior in foam injection molding with mold opening

(2017) Vahid Shaayegan et al.   EUROPEAN POLYMER JOURNAL

Effect of mold opening on the properties of PLA samples obtained by foam injection molding

(2017) Valentina Volpe et al.   POLYMER ENGINEERING AND SCIENCE

Study of the bubble nucleation and growth mechanisms in high-pressure foam injection molding through in-situ visualization

(2016) Vahid Shaayegan et al.   EUROPEAN POLYMER JOURNAL

Polypropylene structural foams: Measurements of the core, skin, and overall mechanical properties with evaluation of predictive models

(2016) Tarik Sadik et al.   JOURNAL OF CELLULAR PLASTICS

Development of high void fraction polylactide composite foams using injection molding: Crystallization and foaming behaviors

(2015) A. Ameli et al.   CHEMICAL ENGINEERING JOURNAL

General aspects of foam injection molding using local precision mold opening technology

(2015) Hans-Peter Heim et al.   POLYMER

Morphological analysis of microcellular PP produced in a core-back injection process using chemical blowing agents and gas counter pressure

(2015) José Antonio Reglero Ruiz et al.   POLYMER ENGINEERING AND SCIENCE

Foam injection molding of poly(lactic acid) with environmentally friendly physical blowing agents

(2014) R. Pantani et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Poly (lactic acid) foaming

(2014) Mohammadreza Nofar et al.   PROGRESS IN POLYMER SCIENCE

Development of high void fraction polylactide composite foams using injection molding: Mechanical and thermal insulation properties

(2013) A. Ameli et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Processing and characterization of solid and foamed injection-molded polylactide with talc

(2013) Aboutaleb Ameli et al.   JOURNAL OF CELLULAR PLASTICS

Open-cell cavity-integrated injection-molded acoustic polypropylene foams

(2013) D. Jahani et al.   MATERIALS & DESIGN

Effects of nano-/micro-sized additives on the crystallization behaviors of PLA and PLA/CO2 mixtures

(2013) Mohammadreza Nofar et al.   POLYMER

Thermal, Mechanical and Rheological Behavior of Poly(lactic acid)/Talc Composites

(2012) Shikha Jain et al.   JOURNAL OF POLYMERS AND THE ENVIRONMENT

Crystallization Kinetics of Linear and Long-Chain-Branched Polylactide

(2011) Mohammadreza Nofar et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Visual observation and numerical studies of polymer foaming behavior of polypropylene/carbon dioxide system in a core-back injection molding process

(2011) Takeshi Ishikawa et al.   POLYMER ENGINEERING AND SCIENCE

Visual observation and numerical studies of N2 vs. CO2 foaming behavior in core-back foam injection molding

(2011) Takeshi Ishikawa et al.   POLYMER ENGINEERING AND SCIENCE

A batch foaming visualization system with extensional stress-inducing ability

(2010) Anson Wong et al.   CHEMICAL ENGINEERING SCIENCE

Microcellular processing of polylactide–hyperbranched polyester–nanoclay composites

(2010) Srikanth Pilla et al.   JOURNAL OF MATERIALS SCIENCE

Analysis of the Impact Properties of Structural Foams

(2009) Walter Michaeli et al.   JOURNAL OF CELLULAR PLASTICS

Strategies to Achieve a Uniform Cell Structure with a High Void Fraction in Advanced Structural Foam Molding

(2008) John W. S. Lee et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Effect of Processing Parameters on the Mechanical Properties of Injection Molded Thermoplastic Polyolefin (TPO) Cellular Foams

(2008) Steven Wong et al.   MACROMOLECULAR MATERIALS AND ENGINEERING

Microcellular injection-molding of polylactide with chain-extender

(2008) Srikanth Pilla et al.   Materials Science & Engineering C-Materials for Biological Applications

Processing technologies for poly(lactic acid)

(2008) L.-T. Lim et al.   PROGRESS IN POLYMER SCIENCE