A review of low density porous materials used in laser plasma experiments

Targets for high repetition rate laser facilities: needs, challenges and perspectives

(2017) I. Prencipe et al.   High Power Laser Science and Engineering

Smooth Membrane Formation on Resorcinol-Formaldehyde Aerogel Balls Gelated Using a Basic Phase-Transfer Catalyst

(2017) Fuyumi Ito et al.   FUSION SCIENCE AND TECHNOLOGY

X-Ray Tomography of Growing Silica Gel with a Density Gradient

(2017) N. G. Borisenko et al.   FUSION SCIENCE AND TECHNOLOGY

Improvements on Permeation GDP Coatings for Resorcinol Formaldehyde Foam Shells for Cryogenic Experiments on OMEGA

(2017) R. R. Paguio et al.   FUSION SCIENCE AND TECHNOLOGY

Optimization of Phase Transfer Catalysis for In Situ Coating of Resorcinol Formaldehyde Targets

(2017) J. J. Karnes et al.   FUSION SCIENCE AND TECHNOLOGY

Recent Developments in Fabrication of New Conceptual Gold Cone and Machining of Polystyrene Shell for Fast Ignition Target

(2017) H. Homma et al.   FUSION SCIENCE AND TECHNOLOGY

Aerogel Microsphere Density: A Comparison of Gravimetric and X-Ray Absorption Techniques

(2017) L. J. Peacock et al.   FUSION SCIENCE AND TECHNOLOGY

Development and Fabrication of NIF-Scale Resorcinol Formaldehyde Foam Shells for ICF Experiments

(2017) R. R. Paguio et al.   FUSION SCIENCE AND TECHNOLOGY

Monolithic and Low-Density (

(2017) Keiji Nagai et al.   FUSION SCIENCE AND TECHNOLOGY

Hexagonally Arranged Nanopore Film Fabricated via Selective Etching by 172-nm Vacuum Ultraviolet Light Irradiation

(2017) Motonori Komura et al.   FUSION SCIENCE AND TECHNOLOGY

Adsorption of Ambient Moisture by Silica Aerogel

(2017) Christopher E. Hamilton et al.   FUSION SCIENCE AND TECHNOLOGY

Process Development and Micro-Machining of MARBLE Foam-Cored Rexolite Hemi-Shell Ablator Capsules

(2016) Randall B. Randolph et al.   FUSION SCIENCE AND TECHNOLOGY

Development of Hierarchical, Tunable Pore Size Polymer Foams for ICF Targets

(2016) Christopher E. Hamilton et al.   FUSION SCIENCE AND TECHNOLOGY

Specific Adaptations of Mechanical Machining Processes for Laser Target Manufacturing

(2016) J. Andre et al.   FUSION SCIENCE AND TECHNOLOGY

Direct Writing Target Structures by Two-Photon Polymerization

(2016) L. J. Jiang et al.   FUSION SCIENCE AND TECHNOLOGY

Use of freezing techniques for increasing the output of ultralow density laser targets

(2016) V. G. Pimenov et al.   INSTRUMENTS AND EXPERIMENTAL TECHNIQUES

The effect of para-divinyl benzene on styrenic emulsion-templated porous polymers: a chemical Trojan horse

(2016) Christopher S. A. Musgrave et al.   JOURNAL OF MATERIALS SCIENCE

First Liquid Layer Inertial Confinement Fusion Implosions at the National Ignition Facility

(2016) R. E. Olson et al.   PHYSICAL REVIEW LETTERS

Efficient energy absorption of intense ps-laser pulse into nanowire target

(2016) H. Habara et al.   PHYSICS OF PLASMAS

Density and temperature characterization of long-scale length, near-critical density controlled plasma produced from ultra-low density plastic foam

(2016) S. N. Chen et al.   Scientific Reports

Fabrication of Ta2O5 Aerogel Targets for Radiation Transport Experiments Using Thin Film Fabrication and Laser Processing

(2016) C. A. Frederick et al.   FUSION SCIENCE AND TECHNOLOGY

Manufacturing Complex Silica Aerogel Target Components

(2016) Kimberly A. DeFriend Obrey et al.   FUSION SCIENCE AND TECHNOLOGY

TPX Foams for Inertial Fusion Laser Experiments: Foam Preparation, Machining, Characterization, and Discussion of Density Issues

(2016) Marie Grosse et al.   FUSION SCIENCE AND TECHNOLOGY

Incorporation of Tracer Elements Within Aerogels and CH Foams

(2016) Christopher E. Hamilton et al.   FUSION SCIENCE AND TECHNOLOGY

Amphiphilic liquid-crystalline 4-miktoarm star copolymers with a siloxane junction leading to cylindrically nanostructured templates for a siloxane-based nanodot array

(2015) Md Asadul Hoque et al.   JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY

Chemically directed self-assembly of perpendicularly aligned cylinders by a liquid crystalline block copolymer

(2015) N. Yamashita et al.   Journal of Materials Chemistry C

Nanoporous Metal Components Bonded with Sputtered Solder for Equation-of-State Laser Targets

(2015) Matthew J. Bono et al.   FUSION SCIENCE AND TECHNOLOGY

Porous Anodic Aluminum Oxide: Anodization and Templated Synthesis of Functional Nanostructures

(2014) Woo Lee et al.   CHEMICAL REVIEWS

Metal–Organic Frameworks (MOFs)

(2014) Hong-Cai “Joe” Zhou et al.   CHEMICAL SOCIETY REVIEWS

Collimated fast electron beam generation in critical density plasma

(2014) T. Iwawaki et al.   PHYSICS OF PLASMAS

Spirulina-Templated Metal Microcoils with Controlled Helical Structures for THz Electromagnetic Responses

(2014) Kaori Kamata et al.   Scientific Reports

Bacterial cells enhance laser driven ion acceleration

(2014) Malay Dalui et al.   Scientific Reports

Site-Selective Self-Assembly of Fullerene Nanoparticles on Amphiphilic Block Copolymer Thin Film from Water Suspension

(2013) Tianyu Yang et al.   JAPANESE JOURNAL OF APPLIED PHYSICS

Hexagonally Arrayed 17 nm Interpenetrating and Continuous Biphasic Structure via Block-Copolymer-Templating Process

(2013) Nanae Yamashita et al.   JAPANESE JOURNAL OF APPLIED PHYSICS

Characterization of divinyl benzene aerogels with density gradient using X-ray tomography technique

(2013) N. G. Borisenko et al.   JOURNAL OF RADIOANALYTICAL AND NUCLEAR CHEMISTRY

Synthesis and characterisation of low density porous polymers by reversible addition-fragmentation chain transfer (RAFT)

(2013) Kimberley L. Anderson et al.   JOURNAL OF RADIOANALYTICAL AND NUCLEAR CHEMISTRY

Metals produced as nano-snow layers for converters of laser light into X-ray for indirect targets and as intensive EUV sources

(2013) I. V. Akimova et al.   JOURNAL OF RADIOANALYTICAL AND NUCLEAR CHEMISTRY

A new approach for the net-shape fabrication of porous Si3N4 bonded SiC ceramics with high strength

(2013) Qiang Liu et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Direct Observation of Faceted Grain Growth of Hexagonal Cylinder Domains in a Side Chain Liquid Crystalline Block Copolymer Matrix

(2013) Motonori Komura et al.   MACROMOLECULES

FIREX foam cryogenic target development: residual void reduction and estimation with solid hydrogen refractive index measurements

(2013) A. Iwamoto et al.   NUCLEAR FUSION

Review of nanostructured carbon materials for electrochemical capacitor applications: advantages and limitations of activated carbon, carbide-derived carbon, zeolite-templated carbon, carbon aerogels, carbon nanotubes, onion-like carbon, and graphene

(2013) Wentian Gu et al.   Wiley Interdisciplinary Reviews-Energy and Environment

Laser-produced plasma-based extreme-ultraviolet light source technology for high-volume manufacturing extreme-ultraviolet lithography

(2012) Junichi Fujimoto et al.   Journal of Micro-Nanolithography MEMS and MOEMS

A new approach to foam-lined indirect-drive NIF ignition targets

(2012) J. Biener et al.   NUCLEAR FUSION

Recent progress in soft-templating of porous carbon materials

(2012) Laemthong Chuenchom et al.   Soft Matter

Exploration of the versatility of ring opening metathesis polymerization: an approach for gaining access to low density polymeric aerogels

(2012) Sung Ho Kim et al.   RSC Advances

Influence of a density mismatch on TMPTMA shells nonconcentricity

(2011) Cecile Lattaud et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Magnetically Guided Fast Electrons in Cylindrically Compressed Matter

(2011) F. Pérez et al.   PHYSICAL REVIEW LETTERS

Recent progress in the synthesis and applications of nanoporous carbon films

(2010) Yousheng Tao et al.   JOURNAL OF MATERIALS CHEMISTRY

Preheating of a target by laser radiation through plasma and polymer aerogel

(2010) Natalia G. Borisenko et al.   JOURNAL OF RUSSIAN LASER RESEARCH

Oriented and low-density tin dioxide film by sol-gel mineralizing tin-contained hydroxypropyl cellulose lyotropic liquid crystal for laser-induced extreme ultraviolet emission

(2009) Keiji Nagai et al.   JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY

Fabrication of aerogel capsule, bromine-doped capsule, and modified gold cone in modified target for the Fast Ignition Realization Experiment (FIREX) Project

(2009) Keiji Nagai et al.   NUCLEAR FUSION

Laser Smoothing and Imprint Reduction with a Foam Layer in the Multikilojoule Regime

(2009) S. Depierreux et al.   PHYSICAL REVIEW LETTERS

Energy Increase in Multi-MeV Ion Acceleration in the Interaction of a Short Pulse Laser with a Cluster-Gas Target

(2009) Y. Fukuda et al.   PHYSICAL REVIEW LETTERS

Titanium dioxide nanofiber-cotton targets for efficient multi-keV x-ray generation

(2008) Minoru Tanabe et al.   APPLIED PHYSICS LETTERS

Thin shell aerogel fabrication for FIREX-I targets using high viscosity (phloroglucinol carboxylic acid)/formaldehyde solution

(2008) H. Yang et al.   LASER AND PARTICLE BEAMS

Nano-structured lithium-tin plane fabrication for laser produced plasma and extreme ultraviolet generation

(2008) Keiji Nagai et al.   LASER AND PARTICLE BEAMS

Rayleigh–Taylor instability growth on low-density foam targets

(2008) T. Watari et al.   PHYSICS OF PLASMAS