Overview of dynamic modelling and analysis of rolling element bearings with localized and distributed faults
Published 2018 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Overview of dynamic modelling and analysis of rolling element bearings with localized and distributed faults
Authors
Keywords
Rolling element bearings (REBs), Localized faults, Distributed faults, Dynamic modelling, Vibration analysis
Journal
NONLINEAR DYNAMICS
Volume -, Issue -, Pages -
Publisher
Springer Nature
Online
2018-05-09
DOI
10.1007/s11071-018-4314-y
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- A theoretical study on vibrations of a ball bearing caused by a dent on the races
- (2018) Jing Liu et al. ENGINEERING FAILURE ANALYSIS
- Mechanical model development of rolling bearing-rotor systems: A review
- (2018) Hongrui Cao et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- An investigation for the friction torque of a needle roller bearing with the roundness error
- (2018) Jing Liu et al. MECHANISM AND MACHINE THEORY
- A numerical investigation of the plastic deformation at the spall edge for a roller bearing
- (2017) Jing Liu et al. ENGINEERING FAILURE ANALYSIS
- Dynamic modeling for rigid rotor bearing systems with a localized defect considering additional deformations at the sharp edges
- (2017) Jing Liu et al. JOURNAL OF SOUND AND VIBRATION
- An improved analytical model for a lubricated roller bearing including a localized defect with different edge shapes
- (2017) Jing Liu et al. JOURNAL OF VIBRATION AND CONTROL
- Nonlinear dynamic modeling of rotor system supported by angular contact ball bearings
- (2017) Hong Wang et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- The dynamic coupling behaviour of a cylindrical geared rotor system subjected to gear eccentricities
- (2017) Wennian Yu et al. MECHANISM AND MACHINE THEORY
- An analytical model to predict vibrations of a cylindrical roller bearing with a localized surface defect
- (2017) Jing Liu et al. NONLINEAR DYNAMICS
- Application of the HB–AFT method to the primary resonance analysis of a dual-rotor system
- (2017) Lei Hou et al. NONLINEAR DYNAMICS
- Dynamic modelling of a rotor-bearing-housing system including a localized fault
- (2017) Jing Liu et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART K-JOURNAL OF MULTI-BODY DYNAMICS
- Effects of spall edge profiles on the edge plastic deformation for a roller bearing
- (2017) Jing Liu et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS
- A comparative study of surface waviness models for predicting vibrations of a ball bearing
- (2017) Jing Liu et al. Science China-Technological Sciences
- Dynamic modeling and vibration response simulations of angular contact ball bearings with ball defects considering the three-dimensional motion of balls
- (2017) Linkai Niu et al. TRIBOLOGY INTERNATIONAL
- Jet cooling for rolling bearings: Flow visualization and temperature distribution
- (2016) Wei Wu et al. APPLIED THERMAL ENGINEERING
- Multi-body modelling of rolling element bearings and performance evaluation with localised damage
- (2016) Urko Leturiondo et al. Eksploatacja i Niezawodnosc-Maintenance and Reliability
- Active magnetic bearings used as exciters for rolling element bearing outer race defect diagnosis
- (2016) Yuanping Xu et al. ISA TRANSACTIONS
- A defect size estimation method based on operational speed and path of rolling elements in defective bearings
- (2016) Alireza Moazen-ahmadi et al. JOURNAL OF SOUND AND VIBRATION
- Vibration response mechanism of faulty outer race rolling element bearings for quantitative analysis
- (2016) Lingli Cui et al. JOURNAL OF SOUND AND VIBRATION
- A New Approach for Fatigue Damage Modeling of Subsurface-Initiated Spalling in Large Rolling Contacts
- (2016) Aditya A. Walvekar et al. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME
- Vibration modelling of nonuniform surface waviness in a lubricated roller bearing
- (2016) Jing Liu et al. JOURNAL OF VIBRATION AND CONTROL
- A comprehensive dynamic model to investigate the stability problems of the rotor–bearing system due to multiple excitations
- (2016) Xuening Zhang et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- A new model for spall-rolling-element interaction
- (2016) G. Kogan et al. NONLINEAR DYNAMICS
- Effects of tooth plastic inclination deformation due to spatial cracks on the dynamic features of a gear system
- (2016) Wennian Yu et al. NONLINEAR DYNAMICS
- The effect of angular misalignment on the stiffness characteristics of tapered roller bearings
- (2016) Van-Canh Tong et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
- Mechanical analysis of spherical roller bearings due to misalignments between inner and outer rings
- (2016) Yu Xing et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
- Study on the stiffness and fatigue life of tapered roller bearings with roller diameter error
- (2016) Van-Canh Tong et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY
- Methodology for the physics-based modelling of multiple rolling element bearing configurations
- (2016) Urko Leturiondo et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART K-JOURNAL OF MULTI-BODY DYNAMICS
- Modeling and Dynamic Analysis of Spherical Roller Bearing with Localized Defects: Analytical Formulation to Calculate Defect Depth and Stiffness
- (2016) Behnam Ghalamchi et al. SHOCK AND VIBRATION
- The effect of angular misalignment on the running torques of tapered roller bearings
- (2016) Van-Canh Tong et al. TRIBOLOGY INTERNATIONAL
- Enhancing Weak Defect Features Using Undecimated and Adaptive Wavelet Transform for Estimation of Roller Defect Size in a Bearing
- (2016) Anil Kumar et al. TRIBOLOGY TRANSACTIONS
- Nonlinear Dynamic Response of Cylindrical Roller Bearing–Rotor System with 9 Degree of Freedom Model Having a Combined Localized Defect at Inner–Outer Races of Bearing
- (2016) Utkarsh Kumar A. Patel et al. TRIBOLOGY TRANSACTIONS
- Fault analysis of the wear fault development in rolling bearings
- (2015) Idriss El-Thalji et al. ENGINEERING FAILURE ANALYSIS
- Review on dynamics of cracked gear systems
- (2015) Hui Ma et al. ENGINEERING FAILURE ANALYSIS
- Fault features analysis of cracked gear considering the effects of the extended tooth contact
- (2015) Hui Ma et al. ENGINEERING FAILURE ANALYSIS
- A study on the effect of subsurface crack propagation on rolling contact fatigue in a bearing ring
- (2015) Song Deng et al. Journal of Mechanical Science and Technology
- Varying stiffness and load distributions in defective ball bearings: Analytical formulation and application to defect size estimation
- (2015) Dick Petersen et al. JOURNAL OF SOUND AND VIBRATION
- A systematic study of ball passing frequencies based on dynamic modeling of rolling ball bearings with localized surface defects
- (2015) Linkai Niu et al. JOURNAL OF SOUND AND VIBRATION
- An extensive review of vibration modelling of rolling element bearings with localised and extended defects
- (2015) Sarabjeet Singh et al. JOURNAL OF SOUND AND VIBRATION
- A New Model for the Relationship Between Vibration Characteristics Caused by the Time-Varying Contact Stiffness of a Deep Groove Ball Bearing and Defect Sizes
- (2015) Jing Liu et al. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME
- Multi-Event Excitation Force Model for Inner Race Defect in a Rolling Element Bearing
- (2015) Sidra Khanam et al. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME
- Toward a 3D dynamic model of a faulty duplex ball bearing
- (2015) Gideon Kogan et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- A nonlinear dynamic vibration model of defective bearings – The importance of modelling the finite size of rolling elements
- (2015) Alireza Moazen Ahmadi et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- A summary of fault modelling and predictive health monitoring of rolling element bearings
- (2015) Idriss El-Thalji et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- Effect of manufacturing errors on load distribution in large diameter slewing bearings of fast breeder reactor rotatable plugs
- (2015) Sriramachandra Aithal et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
- Fatigue life of tapered roller bearing subject to angular misalignment
- (2015) Van-Canh Tong et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
- Effects of axial misalignment of rings on the dynamic characteristics of cylindrical roller bearings
- (2015) Ye Zhenhuan et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY
- A finite element model for rolling contact fatigue of refurbished bearings
- (2015) Neil R. Paulson et al. TRIBOLOGY INTERNATIONAL
- Dynamic modelling of wear evolution in rolling bearings
- (2015) Idriss El-Thalji et al. TRIBOLOGY INTERNATIONAL
- Time-varying mesh stiffness calculation of cracked spur gears
- (2014) Hui Ma et al. ENGINEERING FAILURE ANALYSIS
- Dynamic Modeling and Vibration Response Simulation for High Speed Rolling Ball Bearings With Localized Surface Defects in Raceways
- (2014) Linkai Niu et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- A dynamic model of ball bearing for simulating localized defects on outer race using cubic hermite spline
- (2014) P. G. Kulkarni et al. Journal of Mechanical Science and Technology
- Dynamic analysis of double-row self-aligning ball bearings due to applied loads, internal clearance, surface waviness and number of balls
- (2014) Yaobin Zhuo et al. JOURNAL OF SOUND AND VIBRATION
- A study on waviness induced vibration of ball bearings based on signal coherence theory
- (2014) Wentao Liu et al. JOURNAL OF SOUND AND VIBRATION
- Analyses of contact forces and vibration response for a defective rolling element bearing using an explicit dynamics finite element model
- (2014) Sarabjeet Singh et al. JOURNAL OF SOUND AND VIBRATION
- Low speed bearings fault detection and size estimation using instantaneous angular speed
- (2014) W Moustafa et al. JOURNAL OF VIBRATION AND CONTROL
- Precise measurement of defect width in tapered roller bearing using vibration signal
- (2014) D.P. Jena et al. MEASUREMENT
- Modeling of a deep-groove ball bearing with waviness defects in planar multibody system
- (2014) Li-xin Xu et al. MULTIBODY SYSTEM DYNAMICS
- A new dynamic model for vibration analysis of a ball bearing due to a localized surface defect considering edge topographies
- (2014) Jing Liu et al. NONLINEAR DYNAMICS
- Stability analysis of a rotor–bearing system with time-varying bearing stiffness due to finite number of balls and unbalanced force
- (2013) Xuening Zhang et al. JOURNAL OF SOUND AND VIBRATION
- Three-Dimensional Finite Element Elastic–Plastic Model for Subsurface Initiated Spalling in Rolling Contacts
- (2013) John A. R. Bomidi et al. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME
- Nonlinear vibration and stability analysis of a flexible rotor supported on angular contact ball bearings
- (2013) Li Cui et al. JOURNAL OF VIBRATION AND CONTROL
- Nonlinear dynamic analysis of high speed bearings due to combined localized defects
- (2013) Divyang Harivadan Pandya et al. JOURNAL OF VIBRATION AND CONTROL
- Discrete Wavelet Transform Based Measurement of Inner Race Defect Width in Taper Roller Bearing
- (2013) Manpreet Singh et al. MAPAN-Journal of Metrology Society of India
- Quantitative diagnosis of a spall-like fault of a rolling element bearing by empirical mode decomposition and the approximate entropy method
- (2013) ShuanFeng Zhao et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- Modeling high-speed angular contact ball bearing under the combined radial, axial and moment loads
- (2013) Wen-Zhong Wang et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
- A new method for determining load distributions among rollers of bearing with manufacturing errors
- (2013) Shudong Yu et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
- Subsurface crack propagation under rolling contact fatigue in bearing ring
- (2013) Song Deng et al. Science China-Technological Sciences
- Finite element analysis of a subsurface penny-shaped crack with crack-face contact and friction under a moving compressive load
- (2012) Jin-Shi Wen et al. Journal of Mechanical Science and Technology
- Modeling of surface cracks in rolling contact
- (2012) Y. Kadin et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Outer race defect width measurement in taper roller bearing using discrete wavelet transform of vibration signal
- (2012) Rajesh Kumar et al. MEASUREMENT
- Effect of bearing preloads on the modal characteristics of a shaft-bearing assembly: Experiments on double row angular contact ball bearings
- (2012) Aydin Gunduz et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- Vibration analysis of ball bearings with a localized defect applying piecewise response function
- (2012) Jing Liu et al. MECHANISM AND MACHINE THEORY
- Vibration based performance prediction of ball bearings caused by localized defects
- (2012) P. K. Kankar et al. NONLINEAR DYNAMICS
- Method for Vibration Response Simulation and Sensor Placement Optimization of a Machine Tool Spindle System with a Bearing Defect
- (2012) Hongrui Cao et al. SENSORS
- Numerical modeling of sub-surface initiated spalling in rolling contacts
- (2012) Nick Weinzapfel et al. TRIBOLOGY INTERNATIONAL
- Nonlinear modeling and analysis of a rolling element bearing with a clearance
- (2011) Karthik Kappaganthu et al. Communications in Nonlinear Science and Numerical Simulation
- Effects of plasticity on subsurface initiated spalling in rolling contact fatigue
- (2011) Anurag Warhadpande et al. INTERNATIONAL JOURNAL OF FATIGUE
- Nonlinear Vibration Signature Analysis of a High Speed Rotor Bearing System Due to Race Imperfection
- (2011) P. K. Kankar et al. Journal of Computational and Nonlinear Dynamics
- Experimental and Analytical Investigation of High Speed Turbocharger Ball Bearings
- (2011) Ankur Ashtekar et al. JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME
- Improved model of a ball bearing for the simulation of vibration signals due to faults during run-up
- (2011) Matej Tadina et al. JOURNAL OF SOUND AND VIBRATION
- A 3D Finite Element Study of Fatigue Life Dispersion in Rolling Line Contacts
- (2011) Nick Weinzapfel et al. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME
- Hilbert transform in vibration analysis
- (2011) Michael Feldman MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- Investigation of rolling contact fatigue damage process of the coating by acoustics emission and vibration signals
- (2011) Zhang Zhi-qiang et al. TRIBOLOGY INTERNATIONAL
- A Survey of Condition Monitoring and Protection Methods for Medium-Voltage Induction Motors
- (2010) Pinjia Zhang et al. IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS
- A theoretical model to predict the effect of localized defect on vibrations associated with ball bearing
- (2010) M.S. Patil et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- A Voronoi FE Fatigue Damage Model for Life Scatter in Rolling Contacts
- (2010) Behrooz Jalalahmadi et al. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME
- An Approach for Modeling Material Grain Structure in Investigations of Hertzian Subsurface Stresses and Rolling Contact Fatigue
- (2010) Nick Weinzapfel et al. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME
- A Dynamic Model for Vibration Studies of Deep Groove Ball Bearings Considering Single and Multiple Defects in Races
- (2010) V. N. Patel et al. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME
- Dynamic Modeling of Rolling Element Bearings With Surface Contact Defects Using Bond Graphs
- (2010) Mohsen Nakhaeinejad et al. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME
- The application of spectral kurtosis on Acoustic Emission and vibrations from a defective bearing
- (2010) B. Eftekharnejad et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- Rolling element bearing diagnostics—A tutorial
- (2010) Robert B. Randall et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- Vibration response of spalled rolling element bearings: Observations, simulations and signal processing techniques to track the spall size
- (2010) N. Sawalhi et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- Explicit finite element modeling of subsurface initiated spalling in rolling contacts
- (2010) Trevor Slack et al. TRIBOLOGY INTERNATIONAL
- Nonlinear dynamic analysis of cylindrical roller bearing with flexible rings
- (2009) Alexandre Leblanc et al. JOURNAL OF SOUND AND VIBRATION
- Vibration response of misaligned rotors
- (2009) Tejas H. Patel et al. JOURNAL OF SOUND AND VIBRATION
- A Review of Rolling Contact Fatigue
- (2009) Farshid Sadeghi et al. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME
- Coupling system dynamics and contact behaviour: Modelling bearings subjected to environmental induced vibrations and ‘false brinelling’ degradation
- (2009) Francesco Massi et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- Assessment of natural crack initiation and its propagation in slow speed bearings
- (2009) M. Elforjani et al. Nondestructive Testing and Evaluation
- Nonlinear Dynamics Behaviors of a Rotor Roller Bearing System with Radial Clearances and Waviness Considered
- (2008) Wang Liqin et al. Chinese Journal of Aeronautics
- Nonlinear dynamic modeling of surface defects in rolling element bearing systems
- (2008) Ahmad Rafsanjani et al. JOURNAL OF SOUND AND VIBRATION
- A Statistical Damage Mechanics Model for Subsurface Initiated Spalling in Rolling Contacts
- (2008) Nihar Raje et al. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME
- A Numerical Model for Life Scatter in Rolling Element Bearings
- (2008) Nihar Raje et al. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME
- A New Approach to Modeling Surface Defects in Bearing Dynamics Simulations
- (2008) Ankur Ashtekar et al. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME
- An Investigation of Rolling Element Vibrations Caused by Local Defects
- (2008) H. Arslan et al. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME
- Thermal Effect in Dynamic Yielding and Fracture of Metals and Alloys
- (2008) A.A. Gruzdkov et al. MATHEMATICS AND MECHANICS OF SOLIDS
- Contact Fatigue Analysis of a Dented Surface in a Dry Elastic–Plastic Circular Point Contact
- (2008) Eduard Antaluca et al. TRIBOLOGY LETTERS
- Numerical modelling of crack path in the lubricated rolling–sliding contact problems
- (2007) S. Glodež et al. ENGINEERING FRACTURE MECHANICS
- Simulating gear and bearing interactions in the presence of faults
- (2007) N. Sawalhi et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- A comprehensive dynamic model of double-row spherical roller bearing—Model development and case studies on surface defects, preloads, and radial clearance
- (2007) M. Cao et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- Simulating gear and bearing interactions in the presence of faults
- (2007) N. Sawalhi et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreDiscover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversation