Mechanical metamaterials: a state of the art

Qualitative pivot damage analysis in aluminum printed pantographic sheets: Numerics and experiments

(2017) M. Spagnuolo et al.   MECHANICS RESEARCH COMMUNICATIONS

Curvature, metric and parametrization of origami tessellations: theory and application to the eggbox pattern

(2017) H. Nassar et al.   PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES

Synthesis of Fibrous Complex Structures: Designing Microstructure to Deliver Targeted Macroscale Response

(2016) Francesco dell'Isola et al.   Applied Mechanics Reviews

Buckling modes in pantographic lattices

(2016) Ivan Giorgio et al.   COMPTES RENDUS MECANIQUE

Pantographic 2D sheets: Discussion of some numerical investigations and potential applications

(2016) Francesco dell׳Isola et al.   INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS

Plane bias extension test for a continuum with two inextensible families of fibers: A variational treatment with Lagrange multipliers and a perturbation solution

(2016) Francesco dell’Isola et al.   INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES

A class of auxetic three-dimensional lattices

(2016) Luigi Cabras et al.   JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS

In plane shear and bending for first gradient inextensible pantographic sheets: numerical study of deformed shapes and global constraint reactions

(2016) Leopoldo Greco et al.   MATHEMATICS AND MECHANICS OF SOLIDS

Higher-gradient continua: The legacy of Piola, Mindlin, Sedov and Toupin and some future research perspectives

(2016) Francesco dell’Isola et al.   MATHEMATICS AND MECHANICS OF SOLIDS

Pantographic structures presenting statistically distributed defects: Numerical investigations of the effects on deformation fields

(2016) Emilio Turco et al.   MECHANICS RESEARCH COMMUNICATIONS

Fiber rupture in sheared planar pantographic sheets: Numerical and experimental evidence

(2016) Emilio Turco et al.   MECHANICS RESEARCH COMMUNICATIONS

Multiscale metallic metamaterials

(2016) Xiaoyu Zheng et al.   NATURE MATERIALS

Programming curvature using origami tessellations

(2016) Levi H. Dudte et al.   NATURE MATERIALS

Dynamics of 1D nonlinear pantographic continua

(2016) Ivan Giorgio et al.   NONLINEAR DYNAMICS

Large deformations of planar extensible beams and pantographic lattices: heuristic homogenization, experimental and numerical examples of equilibrium

(2016) F. dell’Isola et al.   PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES

Exegesis of the Introduction and Sect. I from “Fundamentals of the Mechanics of Continua”**by E. Hellinger

(2016) Simon R. Eugster et al.   ZAMM-Zeitschrift fur Angewandte Mathematik und Mechanik

Hencky-type discrete model for pantographic structures: numerical comparison with second gradient continuum models

(2016) Emilio Turco et al.   ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND PHYSIK

Numerical identification procedure between a micro-Cauchy model and a macro-second gradient model for planar pantographic structures

(2016) Ivan Giorgio   ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND PHYSIK

Three-dimensional instabilities of pantographic sheets with parabolic lattices: numerical investigations

(2016) Daria Scerrato et al.   ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND PHYSIK

Mechanical meta-materials

(2016) Amir A. Zadpoor   Materials Horizons

Mechanical response of fabric sheets to three-dimensional bending, twisting, and stretching

(2015) David J. Steigmann et al.   ACTA MECHANICA SINICA

Snapping Mechanical Metamaterials under Tension

(2015) Ahmad Rafsanjani et al.   ADVANCED MATERIALS

Macroscopic Description of Microscopically Strongly Inhomogenous Systems: A Mathematical Basis for the Synthesis of Higher Gradients Metamaterials

(2015) A. Carcaterra et al.   ARCHIVE FOR RATIONAL MECHANICS AND ANALYSIS

Two-photon polymerization microfabrication of hydrogels: an advanced 3D printing technology for tissue engineering and drug delivery

(2015) Jin-Feng Xing et al.   CHEMICAL SOCIETY REVIEWS

Hyper-damping properties of a stiff and stable linear oscillator with a negative stiffness element

(2015) I. Antoniadis et al.   JOURNAL OF SOUND AND VIBRATION

Designable dual-material auxetic metamaterials using three-dimensional printing

(2015) Kan Wang et al.   MATERIALS & DESIGN

The influence of different geometries of matrix/scaffold on the remodeling process of a bone and bioresorbable material mixture with voids

(2015) Ivan Giorgio et al.   MATHEMATICS AND MECHANICS OF SOLIDS

Topological modes bound to dislocations in mechanical metamaterials

(2015) Jayson Paulose et al.   Nature Physics

New examples of three-dimensional dilational materials

(2015) Graeme Walter Milton   PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS

Wave propagation in pantographic 2D lattices with internal discontinuities

(2015) A Madeo et al.   Proceedings of the Estonian Academy of Sciences

Elastic pantographic 2D lattices: a numerical analysis on the static response and wave propagation

(2015) F dell’Isola et al.   Proceedings of the Estonian Academy of Sciences

Selective buckling via states of self-stress in topological metamaterials

(2015) Jayson Paulose et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

Negative stiffness honeycombs for recoverable shock isolation

(2015) Dixon M Correa et al.   RAPID PROTOTYPING JOURNAL

Designing a light fabric metamaterial being highly macroscopically tough under directional extension: first experimental evidence

(2015) Francesco dell’Isola et al.   ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND PHYSIK

Fabrication of various micro/nano structures by modified near-field electrospinning

(2015) T. P. Lei et al.   AIP Advances

A variational approach for a nonlinear one-dimensional damage-elasto-plastic second-gradient continuum model

(2014) Luca Placidi   CONTINUUM MECHANICS AND THERMODYNAMICS

A variational approach for a nonlinear 1-dimensional second gradient continuum damage model

(2014) Luca Placidi   CONTINUUM MECHANICS AND THERMODYNAMICS

Dynamic problems for metamaterials: Review of existing models and ideas for further research

(2014) Dionisio Del Vescovo et al.   INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE

At the origins and in the vanguard of peridynamics, non-local and higher-gradient continuum mechanics: An underestimated and still topical contribution of Gabrio Piola

(2014) Francesco dell’Isola et al.   MATHEMATICS AND MECHANICS OF SOLIDS

On three-dimensional dilational elastic metamaterials

(2014) Tiemo Bückmann et al.   NEW JOURNAL OF PHYSICS

Modeling auxetic foams through semi-rigid rotating triangles

(2014) Elaine Chetcuti et al.   PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS

Programmable Mechanical Metamaterials

(2014) Bastiaan Florijn et al.   PHYSICAL REVIEW LETTERS

Auxetic two-dimensional lattices with Poisson's ratio arbitrarily close to -1

(2014) L. Cabras et al.   PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES

3D PRINTED LATTICES WITH SPATIALLY VARIANT SELF-COLLIMATION

(2014) Raymond C. Rumpf et al.   Progress in Electromagnetics Research-PIER

Ultralight, ultrastiff mechanical metamaterials

(2014) X. Zheng et al.   SCIENCE

Using origami design principles to fold reprogrammable mechanical metamaterials

(2014) J. L. Silverberg et al.   SCIENCE

Review of Mechanics and Applications of Auxetic Structures

(2014) Mariam Mir et al.   Advances in Materials Science and Engineering

3D Soft Metamaterials with Negative Poisson's Ratio

(2013) Sahab Babaee et al.   ADVANCED MATERIALS

Analytical continuum mechanics à la Hamilton–Piola least action principle for second gradient continua and capillary fluids

(2013) N Auffray et al.   MATHEMATICS AND MECHANICS OF SOLIDS

On anisotropic versions of three-dimensional pentamode metamaterials

(2013) Muamer Kadic et al.   NEW JOURNAL OF PHYSICS

Comparative study of potential pentamodal metamaterials inspired by Bravais lattices

(2013) Graciela Fernández Méjica et al.   Smart Materials and Structures

Auxetic materials — A review

(2013) V. H. Carneiro et al.   materials science-poland

Micro-/Nanostructured Mechanical Metamaterials

(2012) Jae-Hwang Lee et al.   ADVANCED MATERIALS

Continuous and scalable fabrication of flexible metamaterial films via roll-to-roll nanoimprint process for broadband plasmonic infrared filters

(2012) Jong G. Ok et al.   APPLIED PHYSICS LETTERS

On the practicability of pentamode mechanical metamaterials

(2012) Muamer Kadic et al.   APPLIED PHYSICS LETTERS

Negative Stiffness Device for Seismic Protection of Structures

(2012) A. A. Sarlis et al.   JOURNAL OF STRUCTURAL ENGINEERING

Complete characterization of the macroscopic deformations of periodic unimode metamaterials of rigid bars and pivots

(2012) Graeme Walter Milton   JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS

Materials that push back

(2012) Joseph N. Grima et al.   NATURE MATERIALS

Mechanical metamaterials with negative compressibility transitions

(2012) Zachary G. Nicolaou et al.   NATURE MATERIALS

A three-dimensional rotating rigid units network exhibiting negative Poisson's ratios

(2012) Daphne Attard et al.   PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS

Three-dimensional cellular structures with negative Poisson's ratio and negative compressibility properties

(2012) J. N. Grima et al.   PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES

An elastic metamaterial with simultaneously negative mass density and bulk modulus

(2011) X. N. Liu et al.   APPLIED PHYSICS LETTERS

Modelling negative linear compressibility in tetragonal beam structures

(2011) D.L. Barnes et al.   MECHANICS OF MATERIALS

Self-assembly of uniform polyhedral silver nanocrystals into densest packings and exotic superlattices

(2011) Joel Henzie et al.   NATURE MATERIALS

Poisson's ratio and modern materials

(2011) G. N. Greaves et al.   NATURE MATERIALS

Negative Linear Compressibility and Massive Anisotropic Thermal Expansion in Methanol Monohydrate

(2011) A. D. Fortes et al.   SCIENCE

Negative linear compressibility of hexagonal honeycombs and related systems

(2011) Joseph N. Grima et al.   SCRIPTA MATERIALIA

Modelling of hexagonal honeycombs exhibiting zero Poisson's ratio

(2010) Daphne Attard et al.   PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS

Negative Poisson's Ratio Behavior Induced by an Elastic Instability

(2009) Katia Bertoldi et al.   ADVANCED MATERIALS

The transverse elastic properties of chiral honeycombs

(2009) A. Lorato et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Micromorphic Approach for Gradient Elasticity, Viscoplasticity, and Damage

(2009) Samuel Forest   JOURNAL OF ENGINEERING MECHANICS

The Variational Approach to Fracture

(2008) Blaise Bourdin et al.   JOURNAL OF ELASTICITY

Truss-type systems exhibiting negative compressibility

(2008) Joseph N. Grima et al.   PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS

Auxetic behaviour from rotating rhombi

(2008) Daphne Attard et al.   PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS

Negative compressibility, negative Poisson's ratio, and stability

(2008) Rod Lakes et al.   PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS

Negative compressibility

(2008) Ruben Gatt et al.   Physica Status Solidi-Rapid Research Letters

Modeling the auxetic transition for carbon nanotube sheets

(2008) V. R. Coluci et al.   PHYSICAL REVIEW B