Challenges in the formability of the next generation of automotive steel sheets

Comparative study on microstructure and mechanical properties of a C-Mn-Si steel treated by quenching and partitioning (Q&P) processes after a full and intercritical austenitization

(2017) Shu Yan et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of partial and full austenitisation on microstructure and mechanical properties of quenching and partitioning steel

(2016) G. Mandal et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

The stability of retained austenite at different locations during straining of I&Q&P steel

(2016) Chenghao Song et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Abnormal expansion due to pearlite-to-austenite transformation in high aluminium-added steels

(2016) P. Chen et al.   MATERIALS SCIENCE AND TECHNOLOGY

Properties assessment of the first industrial coils of low-density duplex δ-TRIP steel

(2016) X. C. Xiong et al.   MATERIALS SCIENCE AND TECHNOLOGY

The origin of the brittleness of high aluminum pearlite and the method for improving ductility

(2016) P. Chen et al.   SCRIPTA MATERIALIA

Microstructure and mechanical properties of a medium manganese steel treated with interrupted quenching and intercritical annealing

(2016) Toshihiro Tsuchiyama et al.   SCRIPTA MATERIALIA

Characterization of Microstructures and Mechanical Properties of Cold-rolled Medium-Mn Steels with Different Annealing Processes

(2015) Jun Hu et al.   ISIJ INTERNATIONAL

Enhanced strain hardening and microstructural characterization in a low carbon quenching and partitioning steel with partial austenization

(2015) Jun Zhang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Tensile Behavior of Intercritically Annealed Ultra-Fine Grained 8% Mn Multi-Phase Steel

(2015) Sangwon Lee et al.   STEEL RESEARCH INTERNATIONAL

Effect of intercritical annealing on the Lüders strains of medium Mn transformation-induced plasticity steels

(2015) Haiwen Luo et al.   MATERIALS & DESIGN

The effects of the initial martensite microstructure on the microstructure and tensile properties of intercritically annealed Fe–9Mn–0.05C steel

(2014) Jeongho Han et al.   ACTA MATERIALIA

Enhanced ductility and toughness in an ultrahigh-strength Mn–Si–Cr–C steel: The great potential of ultrafine filmy retained austenite

(2014) Guhui Gao et al.   ACTA MATERIALIA

Review on δ-Transformation-Induced Plasticity (TRIP) Steels with Low Density: The Concept and Current Progress

(2014) H. L. Yi   JOM

Edge cracking mechanism in two dual-phase advanced high strength steels

(2014) Z.K. Teng et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Optimizing the Morphology and Stability of Retained Austenite in a δ-TRIP Steel

(2014) H. L. Yi et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Microstructure development and mechanical properties of quenching and partitioning (Q&P) steel and an incorporation of hot-dipping galvanization during Q&P process

(2013) Jing Sun et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Study of microstructural evolution, microstructure-mechanical properties correlation and collaborative deformation-transformation behavior of quenching and partitioning (Q&P) steel

(2013) Jing Sun et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of Retained Austenite on the Fracture Toughness of Quenching and Partitioning (Q&P)-Treated Sheet Steels

(2013) Riming Wu et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

On Various Aspects of Decomposition of Austenite in a High-Silicon Steel During Quenching and Partitioning

(2013) Mahesh Chandra Somani et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Austenite stability and heterogeneous deformation in fine-grained transformation-induced plasticity-assisted steel

(2013) Joo Hyun Ryu et al.   SCRIPTA MATERIALIA

Characterization of mechanically sheared edges of dual phase steels

(2012) Xin Wu et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Hot forming of boron steels using heated and cooled tooling for tailored properties

(2012) R. George et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Deformation microstructures and strengthening mechanisms of an ultrafine grained duplex medium-Mn steel

(2012) Chang Wang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Medium-Alloy Manganese-Rich Transformation-Induced Plasticity Steels

(2012) Dong Woo Suh et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

A novel design: Partitioning achieved by quenching and tempering (Q–T & P) in an aluminium-added low-density steel

(2012) H.L. Yi et al.   SCRIPTA MATERIALIA

Experimental and numerical analysis on formation of stable austenite during the intercritical annealing of 5Mn steel

(2011) Haiwen Luo et al.   ACTA MATERIALIA

Work hardening behavior of ultrafine-grained Mn transformation-induced plasticity steel

(2011) Seawoong Lee et al.   ACTA MATERIALIA

Microstructure and mechanical properties of Fe–0.2C–5Mn steel processed by ART-annealing

(2011) W.Q. Cao et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Mechanical stabilisation of retained austenite in δ-TRIP steel

(2011) H.L. Yi et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Stabilisation of ferrite in hot rolled δ-TRIP steel

(2011) H. L. Yi et al.   MATERIALS SCIENCE AND TECHNOLOGY

State-of-the-knowledge on TWIP steel

(2011) B C De Cooman et al.   MATERIALS SCIENCE AND TECHNOLOGY

Austenite Stability Effects on Tensile Behavior of Manganese-Enriched-Austenite Transformation-Induced Plasticity Steel

(2011) P. J. Gibbs et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Localized Deformation in Multiphase, Ultra-Fine-Grained 6 Pct Mn Transformation-Induced Plasticity Steel

(2011) Seawoong Lee et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Experimental and theoretical study of thermal aspects of the hot stamping process

(2010) B. Abdulhay et al.   APPLIED THERMAL ENGINEERING

Tailor die quenching in hot stamping for producing ultra-high strength steel formed parts having strength distribution

(2010) K. Mori et al.   CIRP ANNALS-MANUFACTURING TECHNOLOGY

Finite element analysis of the effect of blanked edge quality upon stretch flanging of AHSS

(2010) P. Sartkulvanich et al.   CIRP ANNALS-MANUFACTURING TECHNOLOGY

A review on hot stamping

(2010) H. Karbasian et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Martensitic steels with carbide free microstructures containing retained austenite

(2010) D. V. Edmonds et al.   MATERIALS SCIENCE AND TECHNOLOGY

Mn partitioning during the intercritical annealing of ultrafine-grained 6% Mn transformation-induced plasticity steel

(2010) Seok-Jae Lee et al.   SCRIPTA MATERIALIA

Influence of Al on the Microstructural Evolution and Mechanical Behavior of Low-Carbon, Manganese Transformation-Induced-Plasticity Steel

(2009) Dong-Woo Suh et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Carbon partitioning to austenite from martensite or bainite during the quench and partition (Q&P) process: A critical assessment

(2007) A.J. Clarke et al.   ACTA MATERIALIA