Review of Manganese Processing for Production of TRIP/TWIP Steels, Part 1: Current Practice and Processing Fundamentals

Tensile property improvement of TWIP-cored three-layer steel sheets fabricated by hot-roll-bonding with low-carbon steel or interstitial-free steel

(2017) Jaeyeong Park et al.   Scientific Reports

FactSage thermochemical software and databases, 2010–2016

(2016) C.W. Bale et al.   CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY

Pyrolusite–CO reduction kinetics

(2016) Patrice Perreault et al.   CHEMICAL ENGINEERING JOURNAL

Electrolytic manganese metal production from manganese carbonate precipitate

(2016) Jianming Lu et al.   HYDROMETALLURGY

Development of carbon–manganese–chromium steels for automotive hot stamping technologies

(2016) T. Taylor et al.   MATERIALS SCIENCE AND TECHNOLOGY

Direct Reduction of Mixtures of Manganese Ore and Iron Ore

(2016) Karla Ohler-Martins et al.   STEEL RESEARCH INTERNATIONAL

Recrystallization behavior of a high-manganese steel: Experiments and simulations

(2015) Christian Haase et al.   ACTA MATERIALIA

The influence of stacking fault energy on the microstructural and strain-hardening evolution of Fe–Mn–Al–Si steels during tensile deformation

(2015) D.T. Pierce et al.   ACTA MATERIALIA

Twinning activities in high-Mn austenitic steels under high-velocity compressive loading

(2015) B. Gumus et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Thermophysical Properties and Solidification Defects of Fe-22Mn-0.7C TWIP Steel

(2015) Peng Lan et al.   STEEL RESEARCH INTERNATIONAL

Conventional and Tailored Mn-Bearing Alloying Agents for the Production of High Manganese Steels

(2015) Gereon Hils et al.   STEEL RESEARCH INTERNATIONAL

CO Reactivity and Porosity of Manganese Materials

(2014) Kira Turkova et al.   ISIJ INTERNATIONAL

Current opinion in medium manganese steel

(2014) Y.-K. Lee et al.   MATERIALS SCIENCE AND TECHNOLOGY

Critical Assessment 7: Quenching and partitioning

(2014) J. G. Speer et al.   MATERIALS SCIENCE AND TECHNOLOGY

Constitutive Modeling of the Mechanical Properties of V-added Medium Manganese TRIP Steel

(2013) Seawoong Lee et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Effect of Different Casting Parameters on the Cleanliness of High Manganese Steel Ingots Compared to High Carbon Steel

(2013) Petrico von Schweinichen et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

A new anode material for oxygen evolution in molten oxide electrolysis

(2013) Antoine Allanore et al.   NATURE

Some aspects of high manganese twinning-induced plasticity (TWIP) steel, a review

(2013) Liqing Chen et al.   Acta Metallurgica Sinica-English Letters

Revealing the strain-hardening behavior of twinning-induced plasticity steels: Theory, simulations, experiments

(2012) David R. Steinmetz et al.   ACTA MATERIALIA

Mapping the Global Flow of Steel: From Steelmaking to End-Use Goods

(2012) Jonathan M. Cullen et al.   ENVIRONMENTAL SCIENCE & TECHNOLOGY

Microstructural evolution and mechanical properties of hot-rolled 11% manganese TRIP steel

(2012) Z.H. Cai et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

High manganese austenitic twinning induced plasticity steels: A review of the microstructure properties relationships

(2011) O. Bouaziz et al.   CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE

Influence of direct reduced iron on the energy balance of the electric arc furnace in steel industry

(2011) Marcus Kirschen et al.   ENERGY

Development in fundamental research on TWIP steel used in automobile industry

(2011) D Z Li et al.   IRONMAKING & STEELMAKING

Formability of TRIP/TWIP Steel Containing Manganese of 18.8%

(2011) Hao DING et al.   JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL

State-of-the-knowledge on TWIP steel

(2011) B C De Cooman et al.   MATERIALS SCIENCE AND TECHNOLOGY

Thermodynamic assessment of the Mn–C system

(2010) Dejan Djurovic et al.   CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY

On the relationship between the twin internal structure and the work-hardening rate of TWIP steels

(2010) H. Idrissi et al.   SCRIPTA MATERIALIA

Strip Casting of a High-Manganese Steel (FeMn22C0.6) Compared with a Process Chain Consisting of Ingot Casting and Hot Forming

(2010) M. Daamen et al.   STEEL RESEARCH INTERNATIONAL

Carbothermal Solid State Reduction of Manganese Ores: 1. Manganese Ore Characterisation

(2009) Ring Kononov et al.   ISIJ INTERNATIONAL

Carbothermal Solid State Reduction of Manganese Ores: 3. Phase Development

(2009) Ring Kononov et al.   ISIJ INTERNATIONAL

Carbothermal Solid State Reduction of Manganese Ores: 2. Non-isothermal and Isothermal Reduction in Different Gas Atmospheres

(2009) Ring Kononov et al.   ISIJ INTERNATIONAL

Analysis and Prevention of Dent Defects Formed during Strip Casting of Twin-Induced Plasticity Steels

(2008) Manjin Ha et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Carbothermal Reduction of Manganese Oxide in Different Gas Atmospheres

(2008) Ring Kononov et al.   METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE

Tensile properties and twinning behavior of high manganese austenitic steel with fine-grained structure

(2008) R. Ueji et al.   SCRIPTA MATERIALIA