Can toe-ground footwear margin alter swing-foot ground clearance?

Falls are an important healthcare concern in the older population and tripping is the primary cause. Greater swing foot-ground clearance is functional for tripping prevention. Trips frequently occur due to the lowest part of the shoe contacting the walking surface. Shoe design effects on swing foot-ground clearance are, therefore, important considerations. When a shoe is placed on a flat surface, there usually is small vertical margin (VM) between the walking surface and the minimum toe point (MTP). The current study examined the effects of VM on swing foot-ground clearance at a critical gait cycle event, minimum foot clearance (MFC). 3D coordinates of the swing foot (i.e. MTP and heel) were obtained during the swing phase. MTP represented the swing foot-ground clearance and various MTPs were modelled based on a range of VMs. The sagittal orientation of the toe and heel relative to the walking surface was also considered to evaluate effects of VM and swing foot angle on foot-ground clearance. Greater VM increased the swing foot-ground clearance. At MFC, for example, 0.09 cm increase was estimated for every 0.1 cm VM. Foot angle throughout the swing phase was typically -30 degrees and 70 degrees. Increasing swing ankle dorsiflexion can maximise VM, which is effective for tripping prevention. Further research will be needed to determine the maximum thresholds of VM to be safely incorporated into a shoe. (C) 2015 Elsevier B.V. All rights reserved.