Renewable fuel production from hydropyrolysis of residual biomass using molybdenum carbide-based catalysts: An analytical Py-GC/MS investigation

Fast hydropyrolysis of lignocellulosic biomass was studied by using an analytical pyrolyzer coupled with a gas chromatography/mass spectrometry set-up (Py-GC/MS). Under pure H-2 stream, Canadian pinewood was rapidly heated up to 500 degrees C and the generated vapors passed through a catalytic bed at 500 degrees C. Experiments were carried out in order to compare the catalytic performance of MoC/Al2O3 catalyst to a reference catalyst based on noble metal (1.5 wt.% Pt/Al2O3). The effect of different supports (Al2O3, ZrO2 and MgO) on the carbide performance and product formation was investigated. The results showed that the performance of MoC/Al2O3 was similar to that of 1.5 wt.% Pt/Al2O3. Both of them deoxygenated the hydropyrolysis vapors and led exclusively to hydrocarbons formation. However, the proportion of aliphatic and aromatic hydrocarbons was different: MoC/Al2O3 catalyst produced more aliphatics (57%) than the Pt catalyst. The supports have demonstrated influence on the product distribution. Acidity of the support seems to play an important role in the deoxygenation of the vapors. While there was complete removal of oxygen when MoC/Al2O3 and MoC/ZrO2 were used, the same did not take place for the more basic MoC/MgO catalyst.