Recent Advances on 3D Printing Technique for Thermal-Related Applications

Fabrication, Modeling, and Application of Ceramic-Thermoplastic Composites for Fused Deposition Modeling of Microwave Components

(2017) Juan Castro et al.   IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES

Direct Printing of Thermal Management Device Using Low-Cost Composite Ink

(2017) Nam Nguyen et al.   MACROMOLECULAR MATERIALS AND ENGINEERING

Residual stress measurement in Fused Deposition Modelling parts

(2017) Caterina Casavola et al.   POLYMER TESTING

Screen-printing inks for the fabrication of solid oxide fuel cell films: A review

(2017) Mahendra R. Somalu et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Electronics Thermal Management in Information and Communications Technologies: Challenges and Future Directions

(2017) Suresh V. Garimella et al.   IEEE Transactions on Components Packaging and Manufacturing Technology

3D-Printing of Meso-structurally Ordered Carbon Fiber/Polymer Composites with Unprecedented Orthotropic Physical Properties

(2017) James P. Lewicki et al.   Scientific Reports

High-Performance Screen-Printed Thermoelectric Films on Fabrics

(2017) Sunmi Shin et al.   Scientific Reports

Direct Ink Write (DIW) 3D Printed Cellulose Nanocrystal Aerogel Structures

(2017) Vincent Chi-Fung Li et al.   Scientific Reports

Three-Dimensional Printable High-Temperature and High-Rate Heaters

(2016) Yonggang Yao et al.   ACS Nano

Ultrahigh Thermal Conductivity of Interface Materials by Silver-Functionalized Carbon Nanotube Phonon Conduits

(2016) Daewoo Suh et al.   ADVANCED MATERIALS

Printed Carbon Nanotube Electronics and Sensor Systems

(2016) Kevin Chen et al.   ADVANCED MATERIALS

High-performance thermal interface materials consisting of vertically aligned graphene film and polymer

(2016) Ya-Fei Zhang et al.   CARBON

A Review of 3D Printing Techniques and the Future in Biofabrication of Bioprinted Tissue

(2016) Satyajit Patra et al.   CELL BIOCHEMISTRY AND BIOPHYSICS

Fused deposition modelling with ABS–graphene nanocomposites

(2016) Sithiprumnea Dul et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Printed thermoelectric materials and devices: Fabrication techniques, advantages, and challenges

(2016) Michael Orrill et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Review of thermal conductivity in composites: Mechanisms, parameters and theory

(2016) N. Burger et al.   PROGRESS IN POLYMER SCIENCE

Use of graphene oxide in achieving high overall thermal properties of polymer for printed electronics

(2016) Tianle Zhou et al.   RSC Advances

Three dimensional printing of high dielectric capacitor using projection based stereolithography method

(2016) Yang Yang et al.   Nano Energy

Thermal Conduction in Vertically Aligned Copper Nanowire Arrays and Composites

(2015) Michael T. Barako et al.   ACS Applied Materials & Interfaces

Printing in Three Dimensions with Graphene

(2015) Esther García-Tuñon et al.   ADVANCED MATERIALS

Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling

(2015) Fuda Ning et al.   COMPOSITES PART B-ENGINEERING

Topology Optimization, Additive Layer Manufacturing, and Experimental Testing of an Air-Cooled Heat Sink

(2015) Ercan M. Dede et al.   JOURNAL OF MECHANICAL DESIGN

Recent developments and directions in printed nanomaterials

(2015) Hyung Woo Choi et al.   Nanoscale

Synergistically Enhanced Stability of Highly Flexible Silver Nanowire/Carbon Nanotube Hybrid Transparent Electrodes by Plasmonic Welding

(2014) Jongsoo Lee et al.   ACS Applied Materials & Interfaces

Elastomeric Thermal Interface Materials with High Through-Plane Thermal Conductivity from Carbon Fiber Fillers Vertically Aligned by Electrostatic Flocking

(2014) Kojiro Uetani et al.   ADVANCED MATERIALS

3D-Printing of Lightweight Cellular Composites

(2014) Brett G. Compton et al.   ADVANCED MATERIALS

Thermo-mechanical Characterization of Metal/Polymer Composite Filaments and Printing Parameter Study for Fused Deposition Modeling in the 3D Printing Process

(2014) Seyeon Hwang et al.   JOURNAL OF ELECTRONIC MATERIALS

Compatible hybrid 3D printing of metal and nonmetal inks for direct manufacture of end functional devices

(2014) Lei Wang et al.   Science China-Technological Sciences

Direct Alignment and Patterning of Silver Nanowires by Electrohydrodynamic Jet Printing

(2014) Hyungdong Lee et al.   Small

Active origami by 4D printing

(2014) Qi Ge et al.   Smart Materials and Structures

Flexible and lightweight thermoelectric generators composed of carbon nanotube–polystyrene composites printed on film substrate

(2013) Kouji Suemori et al.   APPLIED PHYSICS LETTERS

Active materials by four-dimension printing

(2013) Qi Ge et al.   APPLIED PHYSICS LETTERS

Research on the reduction of sink mark and warpage of the molded part in rapid heat cycle molding process

(2013) Xiaoxin Wang et al.   MATERIALS & DESIGN

3D printing of multifunctional nanocomposites

(2013) Thomas A. Campbell et al.   Nano Today

Additive manufacturing (AM) and nanotechnology: promises and challenges

(2013) Olga Ivanova et al.   RAPID PROTOTYPING JOURNAL

Recent developments and applications of screen-printed electrodes in environmental assays—A review

(2012) Meng Li et al.   ANALYTICA CHIMICA ACTA

Thermal conductivity of a graphene oxide–carbon nanotube hybrid/epoxy composite

(2012) Hyungu Im et al.   CARBON

Additive manufacturing and its societal impact: a literature review

(2012) Samuel H. Huang et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Patterned direct-write and screen-printing of NIR-to-visible upconverting inks for security applications

(2012) Tyler Blumenthal et al.   NANOTECHNOLOGY

Integrating stereolithography and direct print technologies for 3D structural electronics fabrication

(2012) Amit Joe Lopes et al.   RAPID PROTOTYPING JOURNAL

Three-dimension direct writing TiO2 crystalline patterns in Bi-free glass using femtosecond laser

(2010) Peng Zhou et al.   APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING

Convective heat transfer and pressure losses across novel heat sinks fabricated by Selective Laser Melting

(2008) M. Wong et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER