Numerical study on the propagation of tensile and shear fracture network in naturally fractured shale reservoirs

The propagations of tensile and shear fracture are important to the permeability enhancement of the naturally fractured shale gas reservoirs during hydraulic fracturing treatment. In this work, the hydraulic fracturing process is numerically investigated by a newly proposed model based on displacement discontinuity method. Natural fracture network is reconstructed from the shale samples from the Longmaxi formation of China. The small fractures that are difficult to be identified from shale samples are simulated by randomly adding virtual fractures. The model is extensively validated against commercial software and the numerical modelling of previous works. Numerical results show that the shearing of natural fractures may occur before they are reopened by fluid pressure. Moreover, the shear length of natural fractures is much longer than that of the hydraulic fractures. The effects of crustal stress are then investigated. The effects of stress angle, which is the angle between maximum principle stress direction and main natural fracture direction, depend on stress difference. When stress difference is small, the optimal stress angle is 90 degrees here the optimal stress angle is defined as the stress angle when the most complex fracture network could be formed through hydraulic fracturing treatment. By contrast, when stress difference is big, the optimal stress angle is in range from 45 degrees to 60 degrees The effects of stress difference also depends on stress angle. When the stress angle equals to 0 degrees the fracture lengths decrease with stress difference. When the angle equals to 45 degrees the fracture lengths increases with stress difference. When the stress angle equals to 90 degrees the fracture lengths first increase and then decrease with stress difference. (C) 2016 Elsevier B.V. All rights reserved.