Understanding inks for porous-electrode formation

Direct observation of active material interactions in flowable electrodes using X-ray tomography

(2017) Kelsey B. Hatzell et al.   FARADAY DISCUSSIONS

Utilizing a Segmented Fuel Cell to Study the Effects of Electrode Coating Irregularities on PEM Fuel Cell Initial Performance

(2017) A. Phillips et al.   Fuel Cells

Solvent effect on the Nafion agglomerate morphology in the catalyst layer of the proton exchange membrane fuel cells

(2017) Tae-Hyun Kim et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

Experimental and Theoretical Analysis of Ink Dispersion Stability for Polymer Electrolyte Fuel Cell Applications

(2017) S. Shukla et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

Direct observation of active material interactions in flowable electrodes using X-ray tomography

(2017) Kelsey B. Hatzell et al.   FARADAY DISCUSSIONS

Improvement of Lithium-Ion Battery Performance by Two-Layered Slot-Die Coating Operation

(2017) Darjen Liu et al.   Energy Technology

Mixed Ionic/Electronic Conducting Surface Layers Adsorbed on Colloidal Silica for Flow Battery Applications

(2016) Jeffrey J. Richards et al.   ACS Applied Materials & Interfaces

A Flexible Integrated System Containing a Microsupercapacitor, a Photodetector, and a Wireless Charging Coil

(2016) Yang Yue et al.   ACS Nano

Molecular Dynamics Study of Ionomer Adsorption at a Carbon Surface in Catalyst Ink

(2016) Tetsuya Mashio et al.   ELECTROCHIMICA ACTA

Effect of electrode manufacturing defects on electrochemical performance of lithium-ion batteries: Cognizance of the battery failure sources

(2016) D. Mohanty et al.   JOURNAL OF POWER SOURCES

The catalyst layer and its dimensionality – A look into its ingredients and how to characterize their effects

(2016) Nada Zamel   JOURNAL OF POWER SOURCES

Experiment and simulation of the fabrication process of lithium-ion battery cathodes for determining microstructure and mechanical properties

(2016) Mehdi M. Forouzan et al.   JOURNAL OF POWER SOURCES

Structure and Dynamics of Interacting Nanoparticles in Semidilute Polymer Solutions

(2016) Ryan Poling-Skutvik et al.   MACROMOLECULES

Ligament Mediated Fragmentation of Viscoelastic Liquids

(2016) Bavand Keshavarz et al.   PHYSICAL REVIEW LETTERS

Adsorption properties of SO 2 and O 3 molecules on Pt-decorated graphene: A theoretical study

(2016) Ali Shokuhi Rad et al.   VACUUM

Promises and challenges of nanomaterials for lithium-based rechargeable batteries

(2016) Yongming Sun et al.   Nature Energy

Elastic instabilities in planar elongational flow of monodisperse polymer solutions

(2016) Simon J. Haward et al.   Scientific Reports

Chemistry of carbon polymer composite electrode – An X-ray photoelectron spectroscopy study

(2015) Shuang Ma Andersen et al.   JOURNAL OF POWER SOURCES

Design of Bi-Tortuous, Anisotropic Graphite Anodes for Fast Ion-Transport in Li-Ion Batteries

(2015) V. P. Nemani et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

Origin of Toughness in Dispersion-Cast Nafion Membranes

(2015) Yu Seung Kim et al.   MACROMOLECULES

Inkjet printing of conductive patterns and supercapacitors using a multi-walled carbon nanotube/Ag nanoparticle based ink

(2015) Siliang Wang et al.   Journal of Materials Chemistry A

Analysis of the Microstructure Formation Process and Its Influence on the Performance of Polymer Electrolyte Fuel-Cell Catalyst Layers

(2015) Shinichi Takahashi et al.   ChemElectroChem

Highly durable electrocatalyst with graphitized carbon supports modified by diazonium reaction for polymer electrolyte membrane fuel cell

(2014) Jun Young Kim et al.   CARBON

Unexplained transport resistances for low-loaded fuel-cell catalyst layers

(2014) Adam Z. Weber et al.   Journal of Materials Chemistry A

Fuel Cell Catalyst Layers: A Polymer Science Perspective

(2013) Steven Holdcroft   CHEMISTRY OF MATERIALS

Side Chain Engineering in Solution-Processable Conjugated Polymers

(2013) Jianguo Mei et al.   CHEMISTRY OF MATERIALS

Optimization of multicomponent aqueous suspensions of lithium iron phosphate (LiFePO4) nanoparticles and carbon black for lithium-ion battery cathodes

(2013) Jianlin Li et al.   JOURNAL OF COLLOID AND INTERFACE SCIENCE

Toward an Ideal Polymer Binder Design for High-Capacity Battery Anodes

(2013) Mingyan Wu et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Effect of the state of distribution of supported Pt nanoparticles on effective Pt utilization in polymer electrolyte fuel cells

(2013) Makoto Uchida et al.   PHYSICAL CHEMISTRY CHEMICAL PHYSICS

New Approaches for High Energy Density Lithium–Sulfur Battery Cathodes

(2012) Scott Evers et al.   ACCOUNTS OF CHEMICAL RESEARCH

Influence of ionomer content on the proton conduction and oxygen transport in the carbon-supported catalyst layers in DMFC

(2012) Xinsheng Zhao et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

Optimization of catalyst ink composition for the preparation of a membrane electrode assembly in a proton exchange membrane fuel cell using the decal transfer

(2012) Chi-Young Jung et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

Influence of the composition of isopropyl alcohol/water mixture solvents in catalyst ink solutions on proton exchange membrane fuel cell performance

(2012) Trung Truc Ngo et al.   JOURNAL OF POWER SOURCES

The Impact of Platinum Loading on Oxygen Transport Resistance

(2012) Thomas A. Greszler et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

Optimization of LiFePO4 Nanoparticle Suspensions with Polyethyleneimine for Aqueous Processing

(2012) Jianlin Li et al.   LANGMUIR

Nafion in Dilute Solvent Systems: Dispersion or Solution?

(2012) Cynthia Welch et al.   ACS Macro Letters

Resolving the Three-Dimensional Microstructure of Polymer Electrolyte Fuel Cell Electrodes using Nanometer-Scale X-ray Computed Tomography

(2011) William K. Epting et al.   ADVANCED FUNCTIONAL MATERIALS

Printed, Sub-3V Digital Circuits on Plastic from Aqueous Carbon Nanotube Inks

(2010) Mingjing Ha et al.   ACS Nano

Fabrication and Performance of Membrane Electrode Assembly Prepared by a Catalyst-Coated Membrane Method: Effect of Solvents Used in a Catalyst Ink Mixture

(2010) Apichai Therdthianwong et al.   ENERGY & FUELS

Effect of MEA fabrication techniques on the cell performance of Pt–Pd/C electrocatalyst for oxygen reduction in PEM fuel cell

(2010) Sarawalee Thanasilp et al.   FUEL

Materials processing for lithium-ion batteries

(2010) Jianlin Li et al.   JOURNAL OF POWER SOURCES

Dealloyed Pt Nanoparticle Fuel Cell Electrocatalysts: Stability and Aging Study of Catalyst Powders, Thin Films, and Inks

(2010) Shirlaine Koh et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

Low Cost, Environmentally Benign Binders for Lithium-Ion Batteries

(2010) S. F. Lux et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

Investigation of a Catalyst Ink Dispersion Using Both Ultra-Small-Angle X-ray Scattering and Cryogenic TEM

(2010) Fan Xu et al.   LANGMUIR

Influence of binder properties on kinetic and transport processes in polymer electrolyte fuel cell electrodes

(2010) Satheesh Sambandam et al.   PHYSICAL CHEMISTRY CHEMICAL PHYSICS

Challenges for Rechargeable Li Batteries†

(2009) John B. Goodenough et al.   CHEMISTRY OF MATERIALS

Silicon Nanotube Battery Anodes

(2009) Mi-Hee Park et al.   NANO LETTERS

Structure and dynamics of biphasic colloidal mixtures

(2008) Ali Mohraz et al.   PHYSICAL REVIEW E