Inkjet and inkjet-based 3D printing: connecting fluid properties and printing performance

Fabrication of conductive paths on a fused deposition modeling substrate using inkjet deposition

(2016) Wenchao Zhou et al.   RAPID PROTOTYPING JOURNAL

Controlling system components with a sound card: A versatile inkjet fluid testing platform

(2016) Brice Bognet et al.   REVIEW OF SCIENTIFIC INSTRUMENTS

Oscillations of aqueous PEDOT:PSS fluid droplets and the properties of complex fluids in drop-on-demand inkjet printing

(2015) Stephen D. Hoath et al.   JOURNAL OF NON-NEWTONIAN FLUID MECHANICS

Capillary breakup of suspensions near pinch-off

(2015) Wouter Mathues et al.   PHYSICS OF FLUIDS

A review of melt extrusion additive manufacturing processes: II. Materials, dimensional accuracy, and surface roughness

(2015) Brian N. Turner et al.   RAPID PROTOTYPING JOURNAL

Shape evolution of multiple interacting droplets in inkjet deposition

(2015) Wenchao Zhou et al.   RAPID PROTOTYPING JOURNAL

Inkjet printing of weakly elastic polymer solutions

(2014) Stephen D. Hoath et al.   JOURNAL OF NON-NEWTONIAN FLUID MECHANICS

Printing Stable Liquid Tracks on a Surface with Finite Receding Contact Angle

(2014) Wen-Kai Hsiao et al.   LANGMUIR

Study of Droplet Formation Process during Drop-on-Demand Inkjetting of Living Cell-Laden Bioink

(2014) Changxue Xu et al.   LANGMUIR

3D bioprinting of tissues and organs

(2014) Sean V Murphy et al.   NATURE BIOTECHNOLOGY

Modelling capillary break-up of particulate suspensions

(2014) Claire McIlroy et al.   PHYSICS OF FLUIDS

Determination of dynamic surface tension and viscosity of non-Newtonian fluids from drop oscillations

(2014) Lisong Yang et al.   PHYSICS OF FLUIDS

Direct fabrication of copper patterns by reactive inkjet printing

(2013) Kukjoo Kim et al.   CURRENT APPLIED PHYSICS

High-speed imaging in fluids

(2013) Michel Versluis   EXPERIMENTS IN FLUIDS

Mixing and internal dynamics of droplets impacting and coalescing on a solid surface

(2013) J. R. Castrejón-Pita et al.   PHYSICAL REVIEW E

Autonomic composite hydrogels by reactive printing: materials and oscillatory response

(2013) R. C. Kramb et al.   Soft Matter

Adult rat retinal ganglion cells and glia can be printed by piezoelectric inkjet printing

(2013) Barbara Lorber et al.   Biofabrication

Inkjet Printing of Carbon Nanotubes

(2013) Ryan Tortorich et al.   Nanomaterials

Nozzle Wetting and Instabilities During Droplet Formation of Molten Nylon Materials in an Inkjet Printhead

(2012) Saeed Fathi et al.   JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME

How PEDOT:PSS solutions produce satellite-free inkjets

(2012) Stephen D. Hoath et al.   ORGANIC ELECTRONICS

Dispensing of rheologically complex fluids: The map of misery

(2011) Christian Clasen et al.   AICHE JOURNAL

Drop-on-demand drop formation of colloidal suspensions

(2011) Xi Wang et al.   INTERNATIONAL JOURNAL OF MULTIPHASE FLOW

Inkjet printing ceramics: From drops to solid

(2011) B. Derby   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

All-Organic Vapor Sensor Using Inkjet-Printed Reduced Graphene Oxide

(2010) Vineet Dua et al.   ANGEWANDTE CHEMIE-INTERNATIONAL EDITION

Inkjet Printing of Functional and Structural Materials: Fluid Property Requirements, Feature Stability, and Resolution

(2010) Brian Derby   Annual Review of Materials Research

A review on stereolithography and its applications in biomedical engineering

(2010) Ferry P.W. Melchels et al.   BIOMATERIALS

Evaluation of the inkjet fluid’s performance using the “Cambridge Trimaster” filament stretch and break-up device

(2010) D. C. Vadillo et al.   JOURNAL OF RHEOLOGY

Reactive inkjet printing of calcium alginate hydrogel porogens—a new strategy to open-pore structured matrices with controlled geometry

(2010) Joseph T. Delaney et al.   Soft Matter

Patterning hydrogels in three dimensions towards controlling cellular interactions

(2010) Sudhir Khetan et al.   Soft Matter

Inkjet Printing-Process and Its Applications

(2009) Madhusudan Singh et al.   ADVANCED MATERIALS

Conductive Inkjet-Printed Antennas on Flexible Low-Cost Paper-Based Substrates for RFID and WSN Applications

(2009) A. Rida et al.   IEEE ANTENNAS AND PROPAGATION MAGAZINE

Influence of Fluid Physical Properties on Ink-Jet Printability

(2009) Daehwan Jang et al.   LANGMUIR

Polymer solar cells with enhanced open-circuit voltage and efficiency

(2009) Hsiang-Yu Chen et al.   Nature Photonics

Shear thickening in colloidal dispersions

(2009) Norman J. Wagner et al.   PHYSICS TODAY

Inkjet printing of proteins

(2009) Joseph T. Delaney et al.   Soft Matter

A review of process development steps for new material systems in three dimensional printing (3DP)

(2009) Ben Utela et al.   Journal of Manufacturing Processes

“Invisible” Silver Tracks Produced by Combining Hot-Embossing and Inkjet Printing

(2008) Chris E. Hendriks et al.   ADVANCED FUNCTIONAL MATERIALS

Thixotropy

(2008) Jan Mewis et al.   ADVANCES IN COLLOID AND INTERFACE SCIENCE

An aqueous ammonia sensor based on an inkjet-printed polyaniline nanoparticle-modified electrode

(2008) Karl Crowley et al.   ANALYST

Direct inkjet printing of Si3N4: Characterization of ink, green bodies and microstructure

(2008) B. Cappi et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Potentials and challenges in jetting microdroplets onto nonwoven fabrics

(2008) B. Karaguzel et al.   JOURNAL OF THE TEXTILE INSTITUTE

Physics of liquid jets

(2008) Jens Eggers et al.   REPORTS ON PROGRESS IN PHYSICS

A simple large-scale droplet generator for studies of inkjet printing

(2008) J. R. Castrejón-Pita et al.   REVIEW OF SCIENTIFIC INSTRUMENTS

Filament stretching of carbon nanotube suspensions

(2008) Anson W. K. Ma et al.   RHEOLOGICA ACTA

Manufacture of 3-dimensional objects by reactive inkjet printing

(2008) Tianming Wang et al.   Soft Matter

Delivery of human fibroblast cells by piezoelectric drop-on-demand inkjet printing

(2007) Rachel E. Saunders et al.   BIOMATERIALS

Progess in superhydrophobic surface development

(2007) Paul Roach et al.   Soft Matter