Investigation of transient ignition processes in a model scramjet pilot cavity using simultaneous 100 kHz formaldehyde planar laser-induced fluorescence and CH* chemiluminescence imaging

Ignition processes in scramjet pilot cavities are highly transient events that are influenced by factors including freestream Mach number and inlet geometry, turbulence intensity, cavity geometry, ignition source, and fueling composition and flow rate. In particular, the location of the flame kernel and associated propagation rate of the flame front throughout the cavity can significantly influence the end state of the ignition process. In this work formaldehyde (CH2O) was used as a flame marker to track ignition progress in a plane throughout the span-wise width of the cavity, while chemiluminescence imaging provided path-integrated flame location along the span-wise and axial directions. Planar laser-induced fluorescence (PLIF) excitation utilized the 355 nm frequency-tripled output of an Nd:YAG burst-mode laser operating at 50-100 kHz over 10 ms with available pulse energy up to 80 mJ. Simultaneous CH* chemiluminescence imaging from the top of the cavity was obtained with a high-speed complementary metal-oxide semiconductor camera. A freestream Mach number of 2 with ethylene fuel rates from 55-90 standard liters per minute were examined along with two different ignition sources: a spark discharge and pulse detonator. The resulting formaldehyde PLIF and chemiluminescence images indicate a strong correlation between fueling rate and the delay between the onset of ignition and stable combustion. More importantly, the span-wise propagation rate and structure of the flame front is highly dependent on the fueling rate, burning region, and ignition source. (C) 2016 by The Combustion Institute. Published by Elsevier Inc.