4.6 Article

Probing the antagonistic effect of toluene as a component in surrogate fuel models at low temperatures and high pressures. A case study of toluene/dimethyl ether mixtures

Journal

PROCEEDINGS OF THE COMBUSTION INSTITUTE
Volume 36, Issue 1, Pages 413-421

Publisher

ELSEVIER SCIENCE INC
DOI: 10.1016/j.proci.2016.06.190

Keywords

Shock tube; Rapid compression machine; Ignition delay time; Toluene; Dimethyl ether

Funding

  1. European Commission [PIAP-GA-2013-610897]
  2. National Natural Science Foundation of China [91541115]
  3. U.S. Department of Energy, Vehicle Technologies Office
  4. U.S. Department of Energy by Lawrence Livermore National Laboratory [DE-AC52-07NA27344]

Ask authors/readers for more resources

There is a dearth of experimental data which examine the fundamental low-temperature ignition (T < 900 K) behavior of toluene resulting in a lack of data for the construction, validation, and interpretation of chemical kinetic models for commercial fuels. In order to gain a better understanding of its combustion chemistry, dimethyl ether (DME) has been used as a radical initiator to induce ignition in this highly knock resistant aromatic, and its influence on the combustion of toluene ignition was studied in both shock tube and rapid compression machines as a function of temperature (624-1459 K), pressure (20-40 atm), equivalence ratio (0.5-2.0), and blending ratio (100% toluene, 76% toluene (76T/24D), 58% toluene (58T/42D), 26% toluene (26T/74D) and 100% DME). Several literature chemical kinetic models are used to interpret our experimental results. For mixtures containing high concentrations of toluene at low-temperatures none of these are capable of reproducing experiment. This implies an incomplete understanding of the low-temperature oxidation pathways which control its ignition in our experimental reactors, and by extension, in spark-(SI) and compression-ignition (CI) engines, and an updated detailed chemical kinetic model is presented for engineering applications. Model analyses indicate that although the initial fate of the fuel is dominated by single-step H-atom abstraction reactions from both the benzylic and phenylic sites, the subsequent fate of the allylic and vinylic radicals formed is much more complex. Further experimental and theoretical endeavors are required to gain a holistic qualitative and quantitative chemical kinetics based understanding of the combustion of pure toluene, toluene blends, and commercial fuels containing other aromatic components, at temperatures of relevance to SI and CI engines. (C) 2016 by The Combustion Institute. Published by Elsevier Inc.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.6
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available