Electrochemical-Thermal Modelling and Optimisation of Lithium-Ion Battery Design Parameters Using Analysis of Variance

Drying of a tape-cast layer: Numerical investigation of influencing parameters

(2017) M. Jabbari et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Identifying main factors of capacity fading in lithium ion cells using orthogonal design of experiments

(2016) Laisuo Su et al.   APPLIED ENERGY

Parameter sensitivity analysis of a simplified electrochemical and thermal model for Li-ion batteries aging

(2016) C. Edouard et al.   JOURNAL OF POWER SOURCES

Electrochemical Modeling of Commercial LiFePO4and Graphite Electrodes: Kinetic and Transport Properties and Their Temperature Dependence

(2016) Mehrdad Mastali et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

3D simulation on the internal distributed properties of lithium-ion battery with planar tabbed configuration

(2015) Jie Li et al.   JOURNAL OF POWER SOURCES

An improved theoretical electrochemical-thermal modelling of lithium-ion battery packs in electric vehicles

(2015) Parisa Amiribavandpour et al.   JOURNAL OF POWER SOURCES

Lithium-ion battery thermal-electrochemical model-based state estimation using orthogonal collocation and a modified extended Kalman filter

(2015) A.M. Bizeray et al.   JOURNAL OF POWER SOURCES

A Bayesian approach for Li-Ion battery capacity fade modeling and cycles to failure prognostics

(2015) Jian Guo et al.   JOURNAL OF POWER SOURCES

Effect of Porosity, Thickness and Tortuosity on Capacity Fade of Anode

(2015) B. Suthar et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

Thick Electrodes for High Energy Lithium Ion Batteries

(2015) M. Singh et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

Impact of Tab Location on Large Format Lithium-Ion Pouch Cell Based on Fully Coupled Tree-Dimensional Electrochemical-Thermal Modeling

(2014) Ahmadou Samba et al.   ELECTROCHIMICA ACTA

A Temperature Dependent, Single Particle, Lithium Ion Cell Model Including Electrolyte Diffusion

(2014) Tanvir R. Tanim et al.   JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME

Two-dimensional electrochemical–thermal coupled modeling of cylindrical LiFePO4 batteries

(2014) Meng Xu et al.   JOURNAL OF POWER SOURCES

An electrochemical–thermal model based on dynamic responses for lithium iron phosphate battery

(2014) Jie Li et al.   JOURNAL OF POWER SOURCES

Model-Based SEI Layer Growth and Capacity Fade Analysis for EV and PHEV Batteries and Drive Cycles

(2014) Matthew T. Lawder et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

Parameter Sensitivity Analysis of Cylindrical LiFePO4Battery Performance Using Multi-Physics Modeling

(2014) Liqiang Zhang et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

Numerical optimization of heat transfer enhancement in a wavy channel using nanofluids

(2013) Yue-Tzu Yang et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

Coupled thermal–electrochemical modelling of uneven heat generation in lithium-ion battery packs

(2013) Billy Wu et al.   JOURNAL OF POWER SOURCES

Thermal analyses of LiFePO 4 /graphite battery discharge processes

(2013) Fangming Jiang et al.   JOURNAL OF POWER SOURCES

A design optimization methodology for Li+ batteries

(2013) Stephanie Golmon et al.   JOURNAL OF POWER SOURCES

Sensitivity analysis of a mathematical model of lithium–sulfur cells part I: Applied discharge current and cathode conductivity

(2013) Mahmoudreza Ghaznavi et al.   JOURNAL OF POWER SOURCES

Multiscale modelling and numerical simulation of rechargeable lithium ion batteries: concepts, methods and challenges

(2013) Alejandro A. Franco   RSC Advances

Response Surface Optimization for Process Parameters of LiFePO4/C Preparation by Carbothermal Reduction Technology

(2012) Kedi YANG et al.   CHINESE JOURNAL OF CHEMICAL ENGINEERING

High power rechargeable batteries

(2012) Paul V. Braun et al.   CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE

The effect of battery design parameters on heat generation and utilization in a Li-ion cell

(2012) Wei Wu et al.   ELECTROCHIMICA ACTA

Effect of Oxide Nanoparticles on Thermal and Mechanical Properties of Electrospun Separators for Lithium-Ion Batteries

(2012) Marco Zaccaria et al.   Journal of Nanomaterials

Dynamic modeling and analysis of a pouch type LiMn2O4/Carbon high power Li-polymer battery based on electrochemical-thermal principles

(2012) Meng Xiao et al.   JOURNAL OF POWER SOURCES

Establishing a Mathematical Model to Predict the Tensile Strength of Friction Stir Welded Pure Copper Joints

(2012) A. Heidarzadeh et al.   METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE

Understanding Rate-Limiting Mechanisms in LiFePO4 Cathodes for Li-Ion Batteries

(2011) Indrajeet V. Thorat et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

Modeling and Simulation of Lithium-Ion Batteries from a Systems Engineering Perspective

(2011) Venkatasailanathan Ramadesigan et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

Investigating the effects of operational factors on PEMFC performance based on CFD simulations using a three-level full-factorial design

(2011) Shan-Jen Cheng et al.   RENEWABLE ENERGY

Effect of cycling rate, particle size and transport properties on lithium-ion cathode performance

(2010) Wenbo Du et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Optimal Porosity Distribution for Minimized Ohmic Drop across a Porous Electrode

(2010) Venkatasailanathan Ramadesigan et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

Porous cathode optimization for lithium cells: Ionic and electronic conductivity, capacity, and selection of materials

(2009) Y.-H. Chen et al.   JOURNAL OF POWER SOURCES

Optimizing the Performance of Lithium Titanate Spinel Paired with Activated Carbon or Iron Phosphate

(2008) Sarah Stewart et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY