Preliminary study on shale gas microreservoir characteristics of the Lower Silurian Longmaxi Formation in the southern Sichuan Basin, China

The Lower Silurian Longmaxi Formation marine shales are the main shale gas reservoirs in the Sichuan Basin, SW China. The present study analyzes the characteristics of the Longmaxi shales using samples selected from wells N1 and N2 in the Changning block, southern Sichuan Basin. Several methods, including X-ray diffraction (XRD), scanning electron microscopy (SEM), helium gas expansion and low pressure nitrogen (N2) adsorption/desorption, were used to investigate the mineralogical composition, geochemical characteristics, pore structure and other characteristics of the shales. The total organic carbon (TOC) contents of the samples range from 0.8 to 6.429%, and the thermal maturity is at the overmature stage. Two wells are rich in quartz and clay, with the average contents of 39.4% and 29.6%, respectively. The Longmaxi shales have the specific surface area and total pore volume around 16.6 m(2)/g and 0.0165 mL/g, respectively. It is suggested that the TOC content contributes significantly to the average pore size, specific surface area and total pore volume, and the thermal maturity strongly influences the development of porosity, as does the mineralogical composition. Based on imagine analysis, we classify shale gas microreservoirs into three types: organic matter with microfractures, organic matter alone and organic matter with mineral pores (interparticle pores (InterP pores) and intraparticle pores (IntraP pores)). The first type is the best for shale gas exploitation. The second type and the type of organic matter with InterP pores are better, while the type of organic matter with IntraP pores is almost useless. The analysis results show that the microreservoirs of well N1 mainly contain the type of organic matter with InterP pores, while the microreservoirs of well N2 are dominated by the type of organic matter with InterP pores and the type of organic matter with microfractures. Combing all the analysis results and their influencing factors, we consider that well N2 is more favorable for gas production than well N1. (C) 2016 Elsevier B.V. All rights reserved.