4.7 Article

Oxidation characteristics of gasoline direct-injection (GDI) engine soot: Catalytic effects of ash and modified kinetic correlation

Journal

COMBUSTION AND FLAME
Volume 162, Issue 6, Pages 2371-2389

Publisher

ELSEVIER SCIENCE INC
DOI: 10.1016/j.combustflame.2015.02.004

Keywords

Gasoline direct-injection (GDI) engine; Soot oxidation reactivity; Ash; Thermogravimetric analysis (TGA); Reaction kinetics

Funding

  1. Argonne, a U.S. Department of Energy Office of Science laboratory [DE-AC02-06CH11357]
  2. Advanced Combustion Engines Program at the U.S. Department of Energy, Office of Vehicle Technologies
  3. Hyundai motor company [C1200101]

Ask authors/readers for more resources

In this paper, experimental analyses are conducted into the GDI soot oxidation characteristics as dependent on engine operating conditions. Soot is sampled at various engine operating conditions of a commercial 2.4 L GDI engine with a naturally aspirated, homogeneous, and stoichiometric operation strategy. The oxidation reactivity, ash composition, and carbon nanostructure of the GDI soot samples are analyzed using thermogravimetric analysis (TGA), scanning electron microscope-energy-dispersive spectroscopy (SEM-EDS), high-resolution transmission electron microscopy (HR-TEM), and Raman spectroscopy. Based on the analyses, a global GDI soot oxidation mechanism is proposed which includes the effects of soluble organic fractions (SOF)/weakly bonded carbon (WBC), and three types of ash on GDI soot oxidation. The results show that GDI soot contains an order of magnitude higher ash fraction than does conventional diesel soot, and oxidation reactivity is significantly enhanced by the catalytic effects of ash, as a function of ash content in soot. A modified empirical kinetic correlation for GDI soot oxidation is suggested on the basis of the results, and the modified kinetic correlation predicts the GDI soot oxidation rate accurately for various engine operation points at wide ranges of soot conversion and temperature without modifying kinetic parameters. The kinetic parameters are determined from isothermal and non-isothermal thermogravimetric analysis (TGA) soot oxidation tests; the methods are elucidated in detail. (C) 2015 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.7
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available