Investigation of the ageing conditions of PEEK powder for the selective laser sintering process

Tensile strength and wear resistance of glass-reinforced PA1212 fabricated by selective laser sintering

(2023) Ting Wu et al.   Virtual and Physical Prototyping

Effect of thermal oxygen aging on the crystallization and insulation properties of polyether ether ketone

(2023) Danyu Li et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Nondestructive observation of the surrounding powder in the vicinity of polymer laser-sintered specimens for understanding orange peel formation

(2023) Ryuichi Kobayashi et al.   RAPID PROTOTYPING JOURNAL

Mechanical properties, biosafety, and shearing bonding strength of glass fiber–reinforced PEEK composites used as post-core materials

(2023) Ting Zhao et al.   Journal of the Mechanical Behavior of Biomedical Materials

Improving selective laser sintering property of PA1212 powder by polydopamine: Physical coating vs in-situ coating

(2023) Yang Wei et al.   POWDER TECHNOLOGY

Surface Roughness and Grain Size Variation When 3D Printing Polyamide 11 Parts Using Selective Laser Sintering

(2023) Riccardo Tonello et al.   Polymers

Fabrication of design-optimized multifunctional safety cage with conformal circuits for drone using hybrid 3D printing technology

(2022) Guo Liang Goh et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Low‐temperature selective laser sintering 3D printing of PEEK‐Nylon blends: Impact of thermal post‐processing on mechanical properties and thermal stability

(2022) Luis A. Chavez et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Effect of Additives and Print Orientation on the Properties of Laser Sintering-Printed Polyamide 12 Components

(2022) Lucie Zárybnická et al.   Polymers

On the Reuse of SLS Polyamide 12 Powder

(2022) Pedro C. Gomes et al.   Materials

Novel backbone modified polyetheretherketone (PEEK) grades for powder bed fusion with enhanced elongation at break

(2022) Nan Yi et al.   Additive Manufacturing

Mechanical properties and microstructure characteristics of lattice-surfaced PEEK cage fabricated by high-temperature laser powder bed fusion

(2022) Peng Chen et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Thermal-radiation aging on oiented poly(ether-ether-ketone) sheets

(2022) Yunyou Yao et al.   JOURNAL OF NUCLEAR MATERIALS

Detecting, characterising and assessing PEEK’s and CF-PEEK’s thermal degradation in rapid high-temperature processing

(2022) Dimitrios Gaitanelis et al.   POLYMER DEGRADATION AND STABILITY

Comparative evaluation of printability and compression properties of poly-ether-ether-ketone triply periodic minimal surface scaffolds fabricated by laser powder bed fusion

(2022) Haoze Wang et al.   Additive Manufacturing

Processability and reusability of CF/PEEK mixture for Powder Bed Fusion of high strength composites

(2022) Mengxue Yan et al.   COMPOSITES COMMUNICATIONS

Poly ether ether ketone and its composite powder prepared by thermally induced phase separation for high temperature selective laser sintering

(2021) Yuan Wang et al.   MATERIALS & DESIGN

Evaluating poly(ether ether ketone) powder recyclability for selective laser sintering applications

(2021) Akanksha Patel et al.   POLYMER DEGRADATION AND STABILITY

The Direct 3D Printing of Functional PEEK/Hydroxyapatite Composites via a Fused Filament Fabrication Approach

(2021) Krzysztof Rodzeń et al.   Polymers

Towards a generally applicable methodology for the characterization of particle properties relevant to processing in powder bed fusion of polymers – From single particle to bulk solid behavior

(2021) Nicolas Hesse et al.   Additive Manufacturing

Thermal aging study of PEEK for nuclear power plant containment dome

(2021) Cuimiao Zhu et al.   JOURNAL OF POLYMER RESEARCH

Investigation and life expectancy prediction on poly(ether-ether-ketone) cables for thermo-oxidative aging in containment dome of nuclear power plant

(2021) Renhao Ding et al.   POLYMER TESTING

Aging mechanism of polyetheretherketone powder during layer-wise infrared radiation of high-temperature laser powder bed fusion

(2021) Peng Chen et al.   MATERIALS & DESIGN

Hydroxyapatite/polyetheretherketone nanocomposites for selective laser sintering: Thermal and mechanical performances

(2020) Wenwen Lai et al.   E-POLYMERS

A comparative study of the crystallinity of Polyetheretherketone by using density, DSC, XRD, and Raman spectroscopy techniques

(2020) M. Doumeng et al.   POLYMER TESTING

Comparative study of the crystallization behavior and morphologies of carbon and glass fiber reinforced poly(ether ether ketone) composites

(2020) Pan Wang et al.   POLYMERS & POLYMER COMPOSITES

A route to improving elongation of high-temperature laser sintered PEKK

(2020) L. Benedetti et al.   Additive Manufacturing

Crystallization kinetics of polyetheretherketone during high temperature-selective laser sintering

(2020) Peng Chen et al.   Additive Manufacturing

Non-isothermal crystallization kinetics of continuous glass fiber-reinforced poly(ether ether ketone) composites

(2019) Haofei Sun et al.   JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

On the stability of PEEK for short processing cycles at high temperatures and oxygen-containing atmosphere

(2019) Alfons Pascual et al.   POLYMER DEGRADATION AND STABILITY

High temperature rheological behavior and sintering kinetics of CF/PEEK composites during selective laser sintering

(2018) Mengxue Yan et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Process prediction of selective laser sintering based on heat transfer analysis for polyamide composite powders

(2018) Xiaoyong Tian et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Mechanical performance of PEEK produced by additive manufacturing

(2018) T.J. Hoskins et al.   POLYMER TESTING

Characterization of thermally annealed PEEK and CFR-PEEK composites: Structure-properties relationships

(2017) Marco Regis et al.   POLYMER DEGRADATION AND STABILITY

Predicting processing parameters in high temperature laser sintering (HT-LS) from powder properties

(2016) S. Berretta et al.   MATERIALS & DESIGN

Processability of PEEK, a new polymer for High Temperature Laser Sintering (HT-LS)

(2015) S. Berretta et al.   EUROPEAN POLYMER JOURNAL

Experimental and numerical analysis of the selective laser sintering (SLS) of PA12 and PEKK semi-crystalline polymers

(2015) Patrice Peyre et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Reactivity of the tin homolog of POSS, butylstannoxane dodecamer, in oxygen-induced crosslinking reactions with an organic polymer matrix: Study of long-time behavior

(2015) Krzysztof Rodzeń et al.   POLYMER DEGRADATION AND STABILITY

Selection of selective laser sintering materials for different applications

(2015) Sunil Kumar Tiwari et al.   RAPID PROTOTYPING JOURNAL

Powder characteristics, microstructure and properties of graphite platelet reinforced Poly Ether Ether Ketone composites in High Temperature Laser Sintering (HT-LS)

(2015) Yuan Wang et al.   MATERIALS & DESIGN

Morphology of polymeric powders in Laser Sintering (LS): From Polyamide to new PEEK powders

(2014) S. Berretta et al.   EUROPEAN POLYMER JOURNAL

High Temperature Laser Sintering (HT-LS): An investigation into mechanical properties and shrinkage characteristics of Poly (Ether Ketone) (PEK) structures

(2014) O. Ghita et al.   MATERIALS & DESIGN

Physico-chemical behaviour of Poly (Ether Ketone) (PEK) in High Temperature Laser Sintering (HT-LS)

(2013) O.R. Ghita et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Mechanical and Thermal Properties of Nano-Titanium Dioxide-Reinforced Polyetheretherketone Produced by Optimized Twin Screw Extrusion

(2010) N. Knör et al.   JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS

Microhardness of PEEK/ceramic micro- and nanocomposites: Correlation with Halpin–Tsai model

(2008) R.K. Goyal et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING