Large-scale material extrusion-based additive manufacturing of short carbon fibre-reinforced silicon carbide ceramic matrix composite preforms

Continuous carbon fiber reinforced ZrB2-SiC composites fabricated by direct ink writing combined with low-temperature hot-pressing

(2022) Yaxiong Liu et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Si/SiC ceramic lattices with a triply periodic minimal surface structure prepared by laser powder bed fusion

(2022) Siqi Wu et al.   Additive Manufacturing

Additive manufacturing of continuous carbon fiber-reinforced SiC ceramic composite with multiple fiber bundles by an extrusion-based technique

(2022) Ruoyu Chen et al.   CERAMICS INTERNATIONAL

Effect of mass transfer channels on flexural strength of C/SiC composites fabricated by femtosecond laser assisted CVI method with optimized laser power

(2021) Jing Wang et al.   Journal of Advanced Ceramics

Effect of pyrolytic carbon interphase on mechanical properties of mini T800-C/SiC composites

(2021) Donglin Zhao et al.   Journal of Advanced Ceramics

TEM study on the morphology and interface microstructure of C/C-SiC composites fabricated by liquid infiltration

(2021) K.X. Zhang et al.   MATERIALS CHARACTERIZATION

Additive manufacturing of Csf/SiC composites with high fiber content by direct ink writing and liquid silicon infiltration

(2021) Wenqing Wang et al.   CERAMICS INTERNATIONAL

Lightweight porous silica ceramics with ultra-low thermal conductivity and enhanced compressive strength

(2021) Xianxi Li et al.   CERAMICS INTERNATIONAL

Influence of erbium addition on the defects of selective laser-melted 7075 aluminium alloy

(2021) Xuhui Zhang et al.   Virtual and Physical Prototyping

Corrosion behavior of LSI-based 3D needled C/SiC composites subjected to burner rig test

(2021) Junjie Duan et al.   CORROSION SCIENCE

Effects of initial density during laser machining assisted CVI process and its influence on strength of C/SiC composites

(2020) Jing Wang et al.   CERAMICS INTERNATIONAL

Fabrication of improved flexural strength C/SiC composites via LA-CVI method using optimized spacing of mass transfer channels

(2020) Jing Wang et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Tribological properties of plasma-sprayed nickel alloy matrix self-lubricating coating at elevated temperatures

(2020) Wen-Sheng Li et al.   RARE METALS

Stereolithography-based additive manufacturing of lightweight and high-strength Cf/SiC ceramics

(2020) Heng Zhang et al.   Additive Manufacturing

Characterization and modeling of tensile properties of continuous fiber reinforced C/C-SiC composite at high temperatures

(2020) Yuan Shi et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Microstructures and mechanical properties of a cast Al–Cu–Li alloy during heat treatment procedure

(2020) Shu-Wei Duan et al.   RARE METALS

Prediction of interlayer strength in material extrusion additive manufacturing

(2020) Timothy J Coogan et al.   Additive Manufacturing

Fabrication and mechanical properties of 3-D Cf/C-SiC-TiC composites prepared by RMI

(2019) Yuanlin Ni et al.   JOURNAL OF ALLOYS AND COMPOUNDS

The preparation of SiC-based ceramics by one novel strategy combined 3D printing technology and liquid silicon infiltration process

(2019) Heng Zhang et al.   CERAMICS INTERNATIONAL

Effect of silicon addition on the microstructure, mechanical and thermal properties of Cf/SiC composite prepared via selective laser sintering

(2019) Hua Fu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Influence of re-melting on surface roughness and porosity of AlSi10Mg parts fabricated by selective laser melting

(2019) Wenhui Yu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Fabrication of SiC whisker-reinforced SiC ceramic matrix composites based on 3D printing and chemical vapor infiltration technology

(2019) Xinyuan Lv et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Oxidation behavior of C/SiC-SiBCN composites at high temperature

(2019) Xin’gang Luan et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

3D SiC containing uniformly dispersed, aligned SiC whiskers: Printability, microstructure and mechanical properties

(2019) Huiwen Xiong et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microstructure evolution and mechanical property response via 3D printing parameter development of Al–Sc alloy

(2019) C. N. Kuo et al.   Virtual and Physical Prototyping

Bending behavior of lightweight C/SiC pyramidal lattice core sandwich panels

(2019) Lu Zhang et al.   INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES

Modeling temperature and residual stress fields in selective laser melting

(2018) Yingli Li et al.   INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES

Enhanced microwave-absorbing property of precursor infiltration and pyrolysis derived SiCf/SiC composites at X band: Role of carbon-rich interphase

(2018) Lingwei Yang et al.   JOURNAL OF THE AMERICAN CERAMIC SOCIETY

Thermal properties of C f /HfC and C f /HfC-SiC composites prepared by precursor infiltration and pyrolysis

(2018) Niranjan Patra et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Fabrication and characterization of carbon fiber reinforced SiC ceramic matrix composites based on 3D printing technology

(2018) Wei Zhu et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

First printing of continuous fibers into ceramics

(2018) Hui Mei et al.   JOURNAL OF THE AMERICAN CERAMIC SOCIETY

Direct ink writing of ceramic matrix composite structures

(2017) Giorgia Franchin et al.   JOURNAL OF THE AMERICAN CERAMIC SOCIETY

Tensile fatigue behavior of plain-weave reinforced C f /C–SiC composites

(2016) Yang Li et al.   CERAMICS INTERNATIONAL

Effect of the surface microstructure of SiC inner coating on the bonding strength and ablation resistance of ZrB 2 -SiC coating for C/C composites

(2016) Yulei Zhang et al.   CERAMICS INTERNATIONAL

Additive manufacturing of boron carbide via continuous filament direct ink writing of aqueous ceramic suspensions

(2016) William J. Costakis et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY