Microstructural Inhomogeneity in the Fusion Zone of Laser Welds

Planetary laser welding system induced equiaxed and refined grains in 2A12 aluminum alloy weldments

(2023) Xiuquan Ma et al.   OPTICS AND LASER TECHNOLOGY

Keyhole fluctuation and pore formation mechanisms during laser powder bed fusion additive manufacturing

(2022) Yuze Huang et al.   Nature Communications

The Growth Behavior for Intermetallic Compounds at the Interface of Aluminum-Steel Weld Joint

(2022) Xiaoquan Yu et al.   Materials

Enhancement of load transfer by interfacial bonding in Al-Cu-Mg joints under the in-situ synergistic effect of carbon nanotubes and silicon nitride

(2022) Tianyu Xu et al.   MATERIALS CHARACTERIZATION

Characterisation of structural modifications on cold-formed AA2024 substrates by wire arc additive manufacturing

(2022) Mathias Silmbroth et al.   SCIENCE AND TECHNOLOGY OF WELDING AND JOINING

Laser Beam and Laser-Arc Hybrid Welding of Aluminium Alloys

(2021) Ivan Bunaziv et al.   Metals

A Review: Laser Welding of Dissimilar Materials (Al/Fe, Al/Ti, Al/Cu)—Methods and Techniques, Microstructure and Properties

(2021) Sergey Kuryntsev   Materials

Depth Dependence and Keyhole Stability at Threshold, for Different Laser Welding Regimes

(2020) Remy Fabbro   Applied Sciences-Basel

Planar-cellular-dendritic transformation in the fusion zone of a GH909 superalloy weldment

(2020) Zhengwu Zhu et al.   Journal of Materials Research and Technology-JMR&T

Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed x-ray imaging

(2019) Ross Cunningham et al.   SCIENCE

Microstructure and mechanical behaviour of aluminium-carbon steel and aluminium-stainless steel clads produced with an aluminium interlayer

(2019) G.H.S.F.L. Carvalho et al.   MATERIALS CHARACTERIZATION

Microstructure and mechanical properties of double-wire + arc additively manufactured Al-Cu-Mg alloys

(2018) Zewu Qi et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Investigation of temperature dependent microstructure evolution of pure iron during friction stir welding using liquid CO 2 rapid cooling

(2018) X.C. Liu et al.   MATERIALS CHARACTERIZATION

Optimisation of process parameters and weld shape of high power Yb-fibre laser welded 2024-T3 aluminium alloy

(2018) J. Ahn et al.   Journal of Manufacturing Processes

Progress in modelling solidification microstructures in metals and alloys: dendrites and cells from 1700 to 2000

(2018) Wilfried Kurz et al.   INTERNATIONAL MATERIALS REVIEWS

Microstructure, mechanical and electrical properties of laser-welded overlap joint of CP Ti and AA2024

(2018) S.V. Kuryntsev   OPTICS AND LASERS IN ENGINEERING

Laser beam oscillating welding of 5A06 aluminum alloys: Microstructure, porosity and mechanical properties

(2018) Zhimin Wang et al.   OPTICS AND LASER TECHNOLOGY

Effect of welding parameters on the microstructure and mechanical properties of the friction stir welded joints of a Mg-12Li-1Al alloy

(2017) Seyed Alireza Askariani et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Prediction of solidification cracking in pulsed laser welding of 2024 aluminum alloy

(2015) M. Sheikhi et al.   ACTA MATERIALIA

Microstructural investigation of controlled short circuiting gas metal arc welding deposited aluminium–lithium alloy

(2014) D. W. Heard et al.   CANADIAN METALLURGICAL QUARTERLY

Effect of reduced pressure atmosphere on weld geometry in partial penetration laser welding of stainless steel and aluminium alloy with high power and high brightness laser

(2014) A. Youhei et al.   SCIENCE AND TECHNOLOGY OF WELDING AND JOINING

Measuring laser weldability of aluminium alloys using controlled restraint weldability test

(2013) N Coniglio et al.   SCIENCE AND TECHNOLOGY OF WELDING AND JOINING

Analysis of high temperature plastic behaviour and its relation with weldability in friction stir welding for aluminium alloys AA5083-H111 and AA6082-T6

(2012) C. Leitão et al.   MATERIALS & DESIGN

Microstructural characterization in dissimilar friction stir welding between 304 stainless steel and st37 steel

(2012) M. Jafarzadegan et al.   MATERIALS CHARACTERIZATION

Fresnel absorption and inverse bremsstrahlung absorption in an actual 3D keyhole during deep penetration CO2 laser welding of aluminum 6016

(2012) Yuanyong Cheng et al.   OPTICS AND LASER TECHNOLOGY

Effects of homogenization on microstructures and properties of a new type Al–Mg–Mn–Zr–Ti–Er alloy

(2010) L.Z. He et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of welding wires on microstructure and mechanical properties of 2A12 aluminum alloy in CO2 laser-MIG hybrid welding

(2009) Jun Yan et al.   APPLIED SURFACE SCIENCE

Effect of the rolling speed on microstructural and mechanical properties of aluminum–magnesium alloys prepared by twin roll casting

(2009) Sanjeev Das et al.   MATERIALS & DESIGN

The relation between liquation and solidification cracks in pulsed laser welding of 2024 aluminium alloy

(2009) F. Malek Ghaini et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING