Effect of embedded periodic fiber placement gap defects on the microstructure and bistable behavior of thermoplastic composite laminates

Negative stiffness and buffering characteristics analysis of bistable laminates with initial curing curvature

(2023) Min Sun et al.   COMPOSITE STRUCTURES

In‐line residual strain monitoring for thermoplastic automated tape layup using fiber Bragg grating sensors

(2022) Neha Yadav et al.   POLYMER COMPOSITES

Analysis and characterization of interlaminar tack for different prepreg materials during automated fiber placement

(2022) Helin Pan et al.   POLYMER COMPOSITES

Evaluation of robotic fiber placement effect on process‐induced residual stresses using incremental hole‐drilling method

(2022) Mohamed M. A. Ammar et al.   POLYMER COMPOSITES

Space deployable bistable composite structures with C-cross section based on machine learning and multi-objective optimization

(2022) Zheng Zhang et al.   COMPOSITE STRUCTURES

Twisting control strategy of bistable composite shell with initial curvature

(2022) Yanqi Li et al.   THIN-WALLED STRUCTURES

Pneumatically Actuated Soft Gripper with Bistable Structures

(2021) Zheng Zhang et al.   Soft Robotics

Shape prediction of bistable plates based on Timoshenko and Ashwell theories

(2021) Francesco Nicassio   COMPOSITE STRUCTURES

Gap filling mechanisms during the thin ply Automated Tape Placement process

(2021) Navid Niknafs Kermani et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Bistable characteristics of hybrid composite laminates embedded with bimetallic strips

(2021) Zheng Zhang et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Tailoring bistability in unsymmetrical laminates using an additional composite strip

(2021) A. Phanendra Kumar et al.   THIN-WALLED STRUCTURES

A Novel Solar Tracking Model Integrated with Bistable Composite Structures and Bimetallic Strips

(2020) Zheng Zhang et al.   COMPOSITE STRUCTURES

Effect of Tow Gaps on Impact Strength of Thin Composite Laminates Made by Automated Fiber Placement: Experimental and Semi-Analytical Approaches

(2020) Mohammadhossein Ghayour et al.   COMPOSITE STRUCTURES

Understanding the impact of fibre wrinkle architectures on composite laminates through tailored gaps and overlaps

(2020) Martinson Nartey et al.   COMPOSITES PART B-ENGINEERING

Analytical approach to study the vibration of delaminated m ulti‐scale composite cylindrical shells

(2020) Ali Akbar Baharali et al.   POLYMER COMPOSITES

Hybrid bistable composite laminates for structural assemblies: A numerical and experimental study

(2020) Aghna Mukherjee et al.   COMPOSITE STRUCTURES

Snap-through and stiffness adaptation of a multi-stable Kirigami composite module

(2019) Aditya Lele et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Effect of automated fiber placement (AFP) manufacturing signature on mechanical performance of composite structures

(2019) Minh Hoang Nguyen et al.   COMPOSITE STRUCTURES

Warping deformation analysis of angle-ply fiber metal laminates with slippage during manufacturing

(2019) Lu Che et al.   THIN-WALLED STRUCTURES

Detection and Evaluation of Pre-Preg Gaps and Overlaps in Glare Laminates

(2018) Davide Nardi et al.   APPLIED COMPOSITE MATERIALS

Experimental investigation of the effect of defects in Automated Fibre Placement produced composite laminates

(2018) Wilhelm Woigk et al.   COMPOSITE STRUCTURES

Manufacture of steel–CF/PA6 hybrids in a laser tape placement process: Effect of first-ply placement rate on thermal history and lap shear strength

(2018) C.M. Stokes-Griffin et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Design and analysis of a broadband vibratory energy harvester using bi-stable piezoelectric composite laminate

(2018) Diankun Pan et al.   ENERGY CONVERSION AND MANAGEMENT

An experimental and simulative study on the defects appeared during tow steering in automated fiber placement

(2018) Nima Bakhshi et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

A rigid thick Miura-Ori structure driven by bistable carbon fibre-reinforced polymer cylindrical shell

(2018) Zheng Zhang et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Shape memory alloy–actuated prestressed composites with application to morphing automotive fender skirts

(2018) Venkata Siva C Chillara et al.   JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES

Design of a Bi-stable Airfoil with Tailored Snap-through Response Using Topology Optimization

(2018) Anurag Bhattacharyya et al.   COMPUTER-AIDED DESIGN

Pattern Reconfigurable Antenna Based on Morphing Bistable Composite Laminates

(2017) Jianqiang Hu et al.   IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION

Influence of embedded gap and overlap fiber placement defects on the microstructure and shear and compression properties of carbon–epoxy laminates

(2016) Marine Lan et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Woven type smart soft composite for soft morphing car spoiler

(2016) Min-Woo Han et al.   COMPOSITES PART B-ENGINEERING

Concurrent design of a morphing aerofoil with variable stiffness bi-stable laminates

(2016) I K Kuder et al.   Smart Materials and Structures

A Review on Bistable Composite Laminates for Morphing and Energy Harvesting

(2015) Samir A. Emam et al.   Applied Mechanics Reviews

Microstructure and tensile properties of carbon–epoxy laminates produced by automated fibre placement: Influence of a caul plate on the effects of gap and overlap embedded defects

(2015) Marine Lan et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Concept for morphing airfoil with zero torsional stiffness

(2015) Stephen Daynes et al.   THIN-WALLED STRUCTURES

Modelling the effect of gaps and overlaps in automated fibre placement (AFP)-manufactured laminates

(2015) Xiangqian Li et al.   SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS

Flytrap-inspired robot using structurally integrated actuation based on bistability and a developable surface

(2014) Seung-Won Kim et al.   Bioinspiration & Biomimetics

Analysing thermally induced macro-scale residual stresses in tailored morphing composite laminates

(2014) R. Telford et al.   COMPOSITE STRUCTURES

Mechanical, thermal, and dynamic mechanical properties of long glass fiber-reinforced thermoplastic polyurethane/polyoxymethylene composites

(2014) Min He et al.   POLYMER COMPOSITES

CubeSat Deployable Antenna Using Bistable Composite Tape-Springs

(2012) J. Costantine et al.   IEEE Antennas and Wireless Propagation Letters

The engineering aspects of automated prepreg layup: History, present and future

(2011) Dirk H.-J.A. Lukaszewicz et al.   COMPOSITES PART B-ENGINEERING

Design and development of hybrid composite bistable structures for energy absorption under quasi-static tensile loading

(2010) Charles Winkelmann et al.   COMPOSITE STRUCTURES

Analysis of unsymmetric CFRP–metal hybrid laminates for use in adaptive structures

(2010) Stephen Daynes et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Characterisation and modelling of the cured shapes of arbitrary layup bistable composite laminates

(2009) David N. Betts et al.   COMPOSITE STRUCTURES

Bistable composite laminates: Effects of laminate composition on cured shape and response to thermal load

(2009) Peter F. Giddings et al.   COMPOSITE STRUCTURES