Uncertainty Analysis of Friction and Wear-Rate of Cylinder Liner–Piston Ring Tribo Pair Under Boundary Lubrication Conditions

A Boundary Lubrication Model and Experimental Study Considering ZDDP Tribofilms on Reciprocating Friction Pairs

(2022) Bugao Lyu et al.   TRIBOLOGY LETTERS

An energy dissipation tribometer to evaluate friction in boundary lubrication regime

(2022) Pranay Vinayak Likhar et al.   TRIBOLOGY INTERNATIONAL

Semi-Analytical Prediction of Starved Line Contacts Considering Oil Transport

(2022) N. Biboulet et al.   TRIBOLOGY LETTERS

Friction of Coated and Uncoated Rough Surfaces in Additive-Free and Fully Formulated Engine Oils Under Boundary and Mixed Lubrication Conditions

(2022) Zhiqiang Liu et al.   JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME

Mathematical analyses and experimental verification of elimination of measurement error in UMT-2 rotating friction system

(2022) Dezun Sheng et al.   MEASUREMENT

Uncertainty propagation on a nonlinear measurement model based on Taylor expansion

(2021) Min-Hee Gu et al.   MEASUREMENT & CONTROL

Influence of Base oil Polarity on the Tribological Performance of Surface-Active Engine Oil Additives

(2021) Febin Cyriac et al.   TRIBOLOGY LETTERS

Numerical calculation of wear in rolling contact based on the Archard equation: Effect of contact parameters and consideration of uncertainties

(2021) Binbin Liu et al.   WEAR

Functional importance of honed cylinder liner surface texture: A review

(2021) P. Pawlus et al.   TRIBOLOGY INTERNATIONAL

Influence of honing angle on tribological behaviour of cylinder liner–piston ring pair: Experimental investigation

(2021) Ajith Kurian Baby et al.   TRIBOLOGY INTERNATIONAL

Study of Dry Wear Behavior and Resistance in Samples of a Horizontally Solidified and T6/Heat-Treated Automotive AlSiMg Alloy

(2020) Hugo M. Azevedo et al.   TRIBOLOGY LETTERS

Tribological behaviour of hypereutectic Al-Si automotive cylinder liner material under dry sliding wear condition in severe wear regime

(2020) Ajith Kurian Baby et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY

Influence of contact area on the sliding friction and wear behaviour of an electrochemical jet textured Al-Si alloy

(2019) J.C. Walker et al.   WEAR

One-dimensional modeling of mechanical and friction losses distribution in a 4-stroke internal combustion engine

(2019) Bernardo Tormos et al.   JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME

Friction Property of MoS2 Coatings Deposited on the Chemical-Etched Surface of Al–Si Alloy Cylinder Liner

(2018) Cheng-Di Li et al.   JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME

Characterization and simulation methods applied to the study of fretting wear in Zircaloy-4

(2018) Gene A. Lucadamo et al.   WEAR

Effect of surface chemical etching on the lubricated reciprocating wear of honed Al–Si alloy

(2017) Cheng-Di Li et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY

Effect of load on the tribological properties of hypereutectic Al–Si alloy under boundary lubrication conditions

(2017) Parveen Kumar et al.   Materials Research Express

Model validation and uncertainty analysis in the wear prediction of a wet clutch

(2016) M. Li et al.   WEAR

A Review of Automotive Engine Friction Reduction Opportunities Through Technologies Related to Tribology

(2016) Arup Gangopadhyay   TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS

Tribological analysis of thin films by pin-on-disc: Evaluation of friction and wear measurement uncertainty

(2014) R. Novak et al.   TRIBOLOGY INTERNATIONAL

Role of friction modifiers on the tribological performance of hypereutectic Al–Si alloy lubricated in boundary conditions

(2011) A Morina et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY

Lubricated Tribology of a Eutectic Aluminium-Silicon Alloy in the Ultra-Mild Wear and Mild Wear Regimes for Long Sliding Times

(2010) Anirban Mahato et al.   ACS Applied Materials & Interfaces

Characterisation of worn cylinder liner surfaces by segmentation of honing and wear scratches

(2010) Z. Dimkovski et al.   WEAR

Measurement Uncertainties in Wear Rates

(2009) David L. Burris et al.   TRIBOLOGY LETTERS

Effect of Surface Pattern on Stribeck Curve

(2009) S. Akbarzadeh et al.   TRIBOLOGY LETTERS

Tribological behaviour of cast hypereutectic Al–Si–Cu alloy subjected to sliding wear

(2009) D.E. Lozano et al.   WEAR