Shear band evolution and mechanical behavior of cold-rolled Zr-based amorphous alloy sheets: An in-situ study

A damage-tolerant Ti-rich multiphase metallic-glass composite with hierarchically heterogeneous architecture

(2023) Shifeng Lin et al.   COMPOSITES PART B-ENGINEERING

Medium-range order endows a bulk metallic glass with enhanced tensile ductility

(2023) Sinan Liu et al.   Journal of Materials Science & Technology

Recent progress in high-entropy metallic glasses

(2023) Hengwei Luan et al.   Journal of Materials Science & Technology

Laser additive manufacturing of ductile Fe-based bulk metallic glass composite

(2022) Qingjie Li et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Rejuvenation by enthalpy relaxation in metallic glasses

(2022) Y.H. Meng et al.   ACTA MATERIALIA

Recent development in the application of bulk metallic glasses

(2022) K. Gao et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Laser additive manufacturing of laminated bulk metallic glass composite with desired strength-ductility combination

(2022) Xiangcheng Cui et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Revealing the structural heterogeneity of metallic glass: Mechanical spectroscopy and nanoindentation experiments

(2021) K. Tao et al.   INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES

Effect on microstructure and plastic deformation behavior of a Zr-based amorphous alloy by cooling rate control

(2021) Feilong Wang et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Stress and Deformation During Solidification of Amorphous Alloys Causes Microstructural Inhomogeneity

(2021) C. Y. Zhang et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Effect of cold rolling on the pressure coefficient of glass transition temperature in bulk metallic glasses

(2021) Parijat P. Jana et al.   THERMOCHIMICA ACTA

Strain-hardening and suppression of shear-banding in rejuvenated bulk metallic glass

(2020) J. Pan et al.   NATURE

Tuning the microstructure and metastability of β-Ti for simultaneous enhancement of strength and ductility of Ti-based bulk metallic glass composites

(2019) L. Zhang et al.   ACTA MATERIALIA

Tunable tensile ductility of metallic glasses with partially rejuvenated amorphous structures

(2019) L. Zhao et al.   ACTA MATERIALIA

Structural heterogeneities and mechanical behavior of amorphous alloys

(2019) J.C. Qiao et al.   PROGRESS IN MATERIALS SCIENCE

Role of atomic-scale chemical heterogeneities in improving the plasticity of Cu-Zr-Ag bulk amorphous alloys

(2018) Hong-Kyu Kim et al.   ACTA MATERIALIA

Modulating mechanical properties of Ti-based bulk metallic glass composites by tailoring dendrite composition with Sn addition

(2018) Yuhao Xu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Extreme rejuvenation and softening in a bulk metallic glass

(2018) J. Pan et al.   Nature Communications

Mechanism of shear banding during cold rolling of a bulk metallic glass

(2018) Sergio Scudino   JOURNAL OF ALLOYS AND COMPOUNDS

Shear band morphology and fracture behavior of cold-rolled Zr 52.5 Ti 5 Cu 18 Ni 14.5 Al 10 bulk metallic glass under tensile loading

(2017) S. Scudino et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Shear band dilatation in amorphous alloys

(2017) M.Q. Jiang et al.   SCRIPTA MATERIALIA

Superior Tensile Ductility in Bulk Metallic Glass with Gradient Amorphous Structure

(2014) Q. Wang et al.   Scientific Reports

Characterization of free volume in cold-rolled Zr55Cu30Ni5Al10 bulk metallic glasses

(2013) O. Haruyama et al.   ACTA MATERIALIA

Evolution of shear bands, free volume and hardness during cold rolling of a Zr-based bulk metallic glass

(2013) M. Stolpe et al.   ACTA MATERIALIA

In-situ Dendrite/Metallic Glass Matrix Composites: A Review

(2013) Junwei Qiao   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Shear bands in metallic glasses

(2013) A.L. Greer et al.   MATERIALS SCIENCE & ENGINEERING R-REPORTS

Designing tensile ductility in metallic glasses

(2013) Baran Sarac et al.   Nature Communications

The activation energy and volume of flow units of metallic glasses

(2012) S.T. Liu et al.   SCRIPTA MATERIALIA

Softening and dilatation in a single shear band

(2011) J. Pan et al.   ACTA MATERIALIA

Significant tensile ductility induced by cold rolling in Cu47.5Zr47.5Al5 bulk metallic glass

(2011) K.K. Song et al.   INTERMETALLICS

Effect of cold rolling on compressive and tensile mechanical properties of Zr52.5Ti5Cu18Ni14.5Al10 bulk metallic glass

(2011) S. Scudino et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Shear band evolution and hardness change in cold-rolled bulk metallic glasses

(2010) J.W. Liu et al.   ACTA MATERIALIA

Mechanical properties of bulk metallic glasses

(2010) Morgana Martin Trexler et al.   PROGRESS IN MATERIALS SCIENCE

Improved plasticity of bulk metallic glasses upon cold rolling

(2010) M.H. Lee et al.   SCRIPTA MATERIALIA

Effect of pre-existing shear bands on the tensile mechanical properties of a bulk metallic glass

(2009) Q.P. Cao et al.   ACTA MATERIALIA

Effect of Pre-Introduced Shear Bands Direction on Deformation Behavior in Zr55Al10Ni5Cu30 Bulk Metallic Glass

(2009) Junpei Kobata et al.   MATERIALS TRANSACTIONS

Plasticity improvement of amorphous alloy via skim cold rolling

(2009) Minh Son Pham et al.   METALS AND MATERIALS INTERNATIONAL

Designing metallic glass matrix composites with high toughness and tensile ductility

(2008) Douglas C. Hofmann et al.   NATURE

Microstructure and microhardness evolutions of Cu47.5Zr47.5Al5 bulk metallic glass processed by rolling

(2008) Q CAO et al.   SCRIPTA MATERIALIA