State-of-the-art review on measurement techniques and numerical modeling of geometric imperfections in cold-formed steel members
Published 2023 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
State-of-the-art review on measurement techniques and numerical modeling of geometric imperfections in cold-formed steel members
Authors
Keywords
-
Journal
Journal of Constructional Steel Research
Volume 207, Issue -, Pages 107942
Publisher
Elsevier BV
Online
2023-05-06
DOI
10.1016/j.jcsr.2023.107942
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Modeling of uncertain geometry of cold formed steel members based on laser measurements and machine learning
- (2023) Xi Zhao et al. ENGINEERING STRUCTURES
- Experimental and numerical study on flexural behaviour of cold-formed steel hat-shaped beams with geometrical imperfections
- (2023) Rafet Aktepe et al. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH
- Geometric imperfections in CFS structural members, Part II: Data-driven modeling and probabilistic validation
- (2023) S. Farzanian et al. THIN-WALLED STRUCTURES
- A novel method and modelling technique for determining the initial geometric imperfection of steel members using 3D scanning
- (2023) Dongdong Xu et al. Structures
- Numerical investigation of the strength and design of cold-formed steel built-up columns
- (2022) Dang Khoa Phan et al. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH
- A review of current practice for testing by analysis of cold-formed steel structures
- (2022) Hyeyoung Koh et al. Structures
- Automated Geometric Imperfection Detection and Quantification of CFS Members from Point Clouds
- (2022) Burcu Güldür Erkal et al. KSCE Journal of Civil Engineering
- Local buckling of corroded cold-formed steel stub columns
- (2021) Biao Nie et al. Structures
- Behaviour and design of slender built-up nested cold-formed steel compression members
- (2021) Son Tung Vy et al. ENGINEERING STRUCTURES
- Geometric dimension and imperfection measurements of box-T section columns using 3D scanning
- (2021) Ziqian Zhang et al. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH
- Tests and design of built-up section columns
- (2021) Dang Khoa Phan et al. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH
- Parametric Studies and Design Rules for Local and Distortional Biaxial-Bending Capacity of Cold-Formed Steel Storage-Rack Uprights
- (2020) Nima Talebian et al. JOURNAL OF STRUCTURAL ENGINEERING
- Experimental investigation on corroded cold-formed steel beam-columns under compression and major axis bending
- (2020) Biao Nie et al. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH
- Experimental investigation and finite element analysis of cold-formed steel channel columns with complex edge stiffeners
- (2020) Yi Xiang et al. THIN-WALLED STRUCTURES
- Imperfection sensitivity analysis and DSM design of web-stiffened lipped channel columns experiencing local-distortional interaction
- (2020) Lu Deng et al. THIN-WALLED STRUCTURES
- Equivalent bow imperfections for use in design by second order inelastic analysis
- (2020) F. Walport et al. Structures
- Statistical analysis of the material, geometrical and imperfection characteristics of structural stainless steels and members
- (2020) Itsaso Arrayago et al. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH
- Stub Column Behavior of Cold-Formed High-Strength Steel Circular Hollow Sections under Compression
- (2020) Junbo Chen et al. JOURNAL OF STRUCTURAL ENGINEERING
- Simplified design method of cold-formed steel columns with built-up box sections
- (2020) Xuhong Zhou et al. ENGINEERING STRUCTURES
- Cold-formed high strength steel tubular beam-columns
- (2020) Jia-Lin Ma et al. ENGINEERING STRUCTURES
- Bracing effect of sheathing in point-symmetric cold-formed steel flexural members
- (2019) Sivaganesh Selvaraj et al. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH
- Experimental and numerical investigations on the axial capacity of cold-formed steel built-up box sections
- (2019) Krishanu Roy et al. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH
- Challenges and solutions associated with the simulation and design of cold-formed steel structural systems
- (2019) P. Kyvelou et al. THIN-WALLED STRUCTURES
- Use of 3D laser scanning on evaluating reduction of initial geometric imperfection of steel column with pre-stressed CFRP
- (2019) Peng Feng et al. ENGINEERING STRUCTURES
- Simulation and design of semi-compact elliptical hollow sections
- (2019) Xin Meng et al. ENGINEERING STRUCTURES
- Behaviour and design of cold-formed CHS under static pure bending through finite element analysis
- (2019) Chenpu Guo et al. THIN-WALLED STRUCTURES
- Finite element modelling of composite cold-formed steel flooring systems
- (2018) Pinelopi Kyvelou et al. ENGINEERING STRUCTURES
- Determination of geometrical imperfection models in finite element analysis of structural steel hollow sections under cyclic axial loading
- (2018) M.S. Hassan et al. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH
- Geometric Imperfection Measurements and Validations on Cold-Formed Steel Channels Using 3D Noncontact Laser Scanner
- (2018) Sivaganesh Selvaraj et al. JOURNAL OF STRUCTURAL ENGINEERING
- Stochastically simulated mode interactions of thin-walled cold-formed steel members using modal identification
- (2018) Zhanjie Li THIN-WALLED STRUCTURES
- A modified ECBL approach for cold-formed steel rack section members
- (2018) Stefano de Miranda et al. THIN-WALLED STRUCTURES
- Experimental investigation on performance of perforated cold–formed steel tubular stub columns
- (2018) Tekcham Gishan Singh et al. THIN-WALLED STRUCTURES
- Finite element analysis and design of cold-formed steel built-up closed section columns with web stiffeners
- (2018) Jia-Hui Zhang et al. THIN-WALLED STRUCTURES
- Geometric Imperfection Measurements and Validations on Cold-Formed Steel Channels Using 3D Noncontact Laser Scanner
- (2018) Sivaganesh Selvaraj et al. JOURNAL OF STRUCTURAL ENGINEERING
- Influence of boundary conditions and load eccentricity on strength of cold-formed lipped channel columns
- (2018) Z. Sadovský et al. THIN-WALLED STRUCTURES
- Strength and deflection behaviour of cold-formed steel back-to-back channels
- (2018) Jun Ye et al. ENGINEERING STRUCTURES
- Reliability calibrations for the design of cold-formed steel portal frames by advanced analysis
- (2018) Francisco Sena Cardoso et al. ENGINEERING STRUCTURES
- Probabilistic estimation of the buckling strength of a CFS lipped-channel section with Type 1 imperfection
- (2017) Hashmi S.S. Ahmed et al. THIN-WALLED STRUCTURES
- An experimental investigation into perforated and non-perforated steel storage rack uprights
- (2017) Xianzhong Zhao et al. THIN-WALLED STRUCTURES
- Local-distortional interaction in cold-formed steel beams: Behaviour, strength and DSM design
- (2017) André Dias Martins et al. THIN-WALLED STRUCTURES
- Laser-based cross-section measurement of cold-formed steel members: Model reconstruction and application
- (2017) Xi Zhao et al. THIN-WALLED STRUCTURES
- Local buckling and ultimate strength of slender elliptical hollow sections in compression
- (2016) F. McCann et al. ENGINEERING STRUCTURES
- Finite element (FE) modelling of storage rack frames
- (2016) Francisco Sena Cardoso et al. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH
- Resistance of cold-formed high strength steel circular and polygonal sections — Part 1: Experimental investigations
- (2016) Anh Tuan Tran et al. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH
- Evaluation of the erosion of critical buckling load of cold-formed steel members in compression based on Koiter asymptotic analysis
- (2016) G. Zagari et al. THIN-WALLED STRUCTURES
- Moment redistribution in cold-formed steel continuous beams
- (2016) Chi Hui et al. THIN-WALLED STRUCTURES
- In-plane behavior of cold-formed thin-walled beam-columns with lipped channel section
- (2016) Ying-Lei Li et al. THIN-WALLED STRUCTURES
- Numerical investigation and direct strength design of cold-formed steel lipped channel columns experiencing local–distortional–global interaction
- (2016) D. Cava et al. THIN-WALLED STRUCTURES
- Development of a Laser-Based Geometric Imperfection Measurement Platform with Application to Cold-Formed Steel Construction
- (2015) X. Zhao et al. EXPERIMENTAL MECHANICS
- Distortional–global interaction buckling of stainless steel C-beams: Part II — Numerical study and design
- (2014) Shuang Niu et al. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH
- Distortional–global interaction buckling of stainless steel C-beams: Part I — Experimental investigation
- (2014) Shuang Niu et al. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH
- Local buckling of cold-formed elements used in arched building with geometrical imperfections
- (2014) Robert Cybulski et al. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH
- Web crippling failure using quasi-static FE models
- (2014) P. Natário et al. THIN-WALLED STRUCTURES
- Experimental investigation of the overall buckling behaviour of 960MPa high strength steel columns
- (2013) Huiyong Ban et al. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH
- Modal identification for shell finite element models of thin-walled members in nonlinear collapse analysis
- (2013) Z. Li et al. THIN-WALLED STRUCTURES
- Geometric imperfections and lower-bound methods used to calculate knock-down factors for axially compressed composite cylindrical shells
- (2013) Saullo G.P. Castro et al. THIN-WALLED STRUCTURES
- Mode interaction in thin-walled equal-leg angle columns
- (2013) Enio Mesacasa et al. THIN-WALLED STRUCTURES
- Imperfection amplitudes for nonlinear analysis of open thin-walled steel cross-sections used in rack column uprights
- (2013) M.M. Pastor et al. THIN-WALLED STRUCTURES
- Residual stresses and initial imperfections in non-linear analysis
- (2012) M.M. Pastor et al. ENGINEERING STRUCTURES
- Computational modelling of geometric imperfections and buckling strength of cold-formed steel
- (2012) Z. Sadovský et al. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH
- Simulation of geometric imperfections in cold-formed steel members using spectral representation approach
- (2012) V.M. Zeinoddini et al. THIN-WALLED STRUCTURES
- Numerical study of built-up double-Z members in bending and compression
- (2012) Iveta Georgieva et al. THIN-WALLED STRUCTURES
- Behaviour of cold-formed steel perforated sections in compression: Part 2—numerical investigations and design considerations
- (2012) Andrei Crisan et al. THIN-WALLED STRUCTURES
- Behaviour of cold-formed steel perforated sections in compression. Part 1—Experimental investigations
- (2012) Andrei Crisan et al. THIN-WALLED STRUCTURES
- Finite element simulation of slender thin-walled box columns by implementing real initial conditions
- (2011) Luka Pavlovčič et al. ADVANCES IN ENGINEERING SOFTWARE
- Finite element modelling of cold-formed steel beams under local buckling or combined local/distortional buckling
- (2011) Mohammad Reza Haidarali et al. THIN-WALLED STRUCTURES
- Selection of the initial geometrical imperfection in nonlinear FE analysis of cold-formed steel rack columns
- (2011) J. Bonada et al. THIN-WALLED STRUCTURES
- Post-buckling behaviour and strength of cold-formed steel lipped channel columns experiencing distortional/global interaction
- (2010) Pedro B. Dinis et al. COMPUTERS & STRUCTURES
- Local/distortional mode interaction in cold-formed steel lipped channel beams
- (2010) P. Borges Dinis et al. THIN-WALLED STRUCTURES
- Computational modeling of cold-formed steel
- (2010) B.W. Schafer et al. THIN-WALLED STRUCTURES
- Buckling mode identification of thin-walled members by using cFSM base functions
- (2010) Sándor Ádány et al. THIN-WALLED STRUCTURES
- Comparative experimental study of hot-rolled and cold-formed rectangular hollow sections
- (2010) L. Gardner et al. THIN-WALLED STRUCTURES
- Coupled instabilities with distortional buckling in cold-formed steel lipped channel columns
- (2010) Dinar Camotim et al. THIN-WALLED STRUCTURES
- Testing and numerical modelling of lean duplex stainless steel hollow section columns
- (2009) M. Theofanous et al. ENGINEERING STRUCTURES
- A numerical investigation of local–overall interaction buckling of stainless steel lipped channel columns
- (2009) Jurgen Becque et al. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH
- Experimental investigation of local-overall interaction buckling of stainless steel lipped channel columns
- (2009) Jurgen Becque et al. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH
- Design of Cold-Formed Steel Built-Up Closed Sections with Intermediate Stiffeners
- (2008) Ben Young et al. JOURNAL OF STRUCTURAL ENGINEERING
- Robust design of composite cylindrical shells under axial compression — Simulation and validation
- (2008) C. Hühne et al. THIN-WALLED STRUCTURES
- Experiments on cold-formed steel columns with holes
- (2008) Cristopher D. Moen et al. THIN-WALLED STRUCTURES
Add your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload NowBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started