Experimental analysis of the effect of natural fibers and SiC filler on the thermal behavior of green biocomposites

The synergistic flame-retardant behaviors of soybean oil phosphate-based polyols and modified ammonium polyphosphate in polyurethane foam

(2023) Junrui Chi et al.   JOURNAL OF POLYMER RESEARCH

Preparation of a strong, high prepressing intensity, and multifunction soybean protein adhesive by using hyperbranched functional polymer

(2023) Zheng Liu et al.   POLYMER TESTING

Leverage of weave pattern and composite thickness on dynamic mechanical analysis, water absorption and flammability response of bamboo fabric/epoxy composites

(2023) Gangadhar M. Kanaginahal et al.   Heliyon

Investigations on physical, mechanical, morphological and water absorption properties of ramie/hemp/kevlar reinforced vinyl ester hybrid composites

(2023) Praveenkumara Jagadeesh et al.   JOURNAL OF VINYL & ADDITIVE TECHNOLOGY

Organic Phosphoric Acid Doped Polyaniline‐Coupled g‐C3N4 for Enhancing Fire Safety of Intumescent Flame‐Retardant Epoxy Resin

(2023) Xilei Chen et al.   MACROMOLECULAR RAPID COMMUNICATIONS

Flame retardant behavior of multi-scale layered PBT/IFR composites

(2023) Jianbin Li et al.   POLYMER TESTING

Investigation of Mechanical and Dynamic Mechanical Properties of Sisal, Jute and Banana Peduncle Fibre Composite Materials

(2023) Praveen Nagarajan Durai et al.   AATCC Journal of Research

Effect of bamboo hand sheet types on geometry and mechanical properties of the bamboo hand sheet/Green Epoxy composites fabricated by vacuum-injection technique

(2023) Jerachard Kaima et al.   Journal of Materials Research and Technology-JMR&T

Effect of reinforcement of Alkaline-treated sugar palm/bamboo/kenaf and fibreglass/ Kevlar with polyester hybrid biocomposites: mechanical, morphological, and water absorption properties

(2023) F.S.M. Radzi et al.   Journal of Materials Research and Technology-JMR&T

A novel study on the development of sisal-jute fiber epoxy filler–based composites for brake pad application

(2023) Hareesha Manjulaiah et al.   Biomass Conversion and Biorefinery

Adhesive behavior of sisal and jute composite exposed to three months cyclic temperature variation

(2023) Kassahun Gashu Melese et al.   Journal of Advanced Joining Processes

Effect of fiber content and curvature on probabilistic free vibration analysis of cylindrical shallow shells reinforced by short natural fibers

(2023) Zakia Guezzen et al.   INDUSTRIAL CROPS AND PRODUCTS

Effect of alkali treatment on tensile strength of epoxy composite reinforced with coir fiber

(2022) Rahul Shrivastava et al.   POLYMER BULLETIN

Study of flame retardancy effect on the thermal degradation of a new green biocomposite and estimation of lower flammability limits of the gaseous emissions

(2022) M. Rashid et al.   JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

Cellulose‐Based Sustainable Composites: A Review of Systems for Applications in EMI Shielding and Sensor

(2022) Amanuel Gebrekrstos et al.   MACROMOLECULAR MATERIALS AND ENGINEERING

A review on the limitations of natural fibres and natural fibre composites with emphasis on tensile strength using coir as a case study

(2022) Chioma Ifeyinwa Madueke et al.   POLYMER BULLETIN

Kinetic analysis of the thermal degradation of an intumescent fire retardant coated green biocomposite

(2022) M. Rashid et al.   THERMOCHIMICA ACTA

Product Development of Natural Fibre-Composites for Various Applications: Design for Sustainability

(2022) Muhammad Rizal Muhammad Asyraf et al.   Polymers

Synchronously improved thermal conductivity and dielectric constant for epoxy composites by introducing functionalized silicon carbide nanoparticles and boron nitride microspheres

(2022) Lihua Zhao et al.   JOURNAL OF COLLOID AND INTERFACE SCIENCE

Development of elastomeric intumescent fire-retardant coating for protection of structures at sub-zero temperature condition

(2022) Raj Shree et al.   MATERIALS CHEMISTRY AND PHYSICS

High strength, low flammability, and smoke suppression for epoxy thermoset enabled by a low-loading phosphorus-nitrogen-silicon compound

(2021) Wenhui Rao et al.   COMPOSITES PART B-ENGINEERING

Development of biomaterial fillers using eggshells, water hyacinth fibers, and banana fibers for green concrete construction

(2021) Samit Niyasom et al.   CONSTRUCTION AND BUILDING MATERIALS

Comparison of the properties of flax shives based particleboards prepared using binders of bio-based lignin and partially bio-based epoxy resin

(2021) Safa Essid et al.   INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES

Synthesis of phosphorus and silicon co‐doped graphitic carbon nitride and its combination with ammonium polyphosphate to enhance the flame retardancy of epoxy resin

(2021) Wenyi Zhang et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Synthesis of novel calixarene‐based intumescent flame retardant and application of flame retardant epoxy resin

(2021) Dingran Zhang et al.   JOURNAL OF APPLIED POLYMER SCIENCE

The effect of boric acid on flame retardancy of intumescent flame retardant polypropylene composites including nanoclay

(2021) Yasin Demirhan et al.   JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS

Silicon oxide encapsulated ZIF-8 loaded on reduced graphene oxide to improve flame retardancy of waterborne epoxy coatings

(2021) Chunlin Chen et al.   PROGRESS IN ORGANIC COATINGS

Reaction kinetics during non-isothermal solid-state synthesis of boron trioxide via boric acid dehydration

(2021) Gurwinder Kaur et al.   Reaction Kinetics Mechanisms and Catalysis

Natural fibres as promising environmental-friendly reinforcements for polymer composites

(2020) Muhammad Ramzan Abdul Karim et al.   POLYMERS & POLYMER COMPOSITES

Experimental and numerical analysis on the thermal degradation of reinforced silicone-based composites: Effect of carbon fibres and silicon carbide powder contents

(2020) G. Dugast et al.   THERMOCHIMICA ACTA

Development of Bioepoxy Resin Microencapsulated Ammonium-Polyphosphate for Flame Retardancy of Polylactic Acid

(2019) Kata Decsov et al.   MOLECULES

Thermal behaviour of laminated bamboo structures under fire conditions

(2019) Ian Pope et al.   FIRE AND MATERIALS

Thermal and Mechanical Properties of Bamboo Fiber Reinforced Epoxy Composites

(2018) Kai Zhang et al.   Polymers

Polydopamine induced natural fiber surface functionalization: a way towards flame retardancy of flax/poly(lactic acid) biocomposites

(2018) Lu Zhang et al.   COMPOSITES PART B-ENGINEERING

Numerical investigation of the heat transfer in an aeronautical composite material under fire stress

(2016) N. Grange et al.   FIRE SAFETY JOURNAL

Machinability of natural fiber reinforced composites: a review

(2016) Mahmoud M. A. Nassar et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Studies on the thermal properties of silicone polymer based thermal protection systems for space applications

(2016) Supriya Nair et al.   JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

A Review on Natural Fiber Reinforced Polymer Composite and Its Applications

(2015) Layth Mohammed et al.   International Journal of Polymer Science

Minimum Ignition Energy Measurements for α-Pinene/Air Mixtures

(2014) S. Rudz et al.   COMBUSTION SCIENCE AND TECHNOLOGY

Evaluation of mechanical and thermal properties of banana–flax based natural fibre composite

(2014) V.S. Srinivasan et al.   MATERIALS & DESIGN

Flammability limits of biogenic volatile organic compounds emitted by fire-heated vegetation (Rosmarinus officinalis) and their potential link with accelerating forest fires in canyons: A Froude-scaling approach

(2013) Khaled Chetehouna et al.   JOURNAL OF FIRE SCIENCES

Bamboo fiber and its reinforced composites: structure and properties

(2012) Dagang Liu et al.   CELLULOSE

An overview of flame retardancy of polymeric materials: application, technology, and future directions

(2012) Alexander B. Morgan et al.   FIRE AND MATERIALS

Improved thermal conductivity of epoxy composites using a hybrid multi-walled carbon nanotube/micro-SiC filler

(2009) Tianle Zhou et al.   CARBON

Comparison of two methods for estimating fire positions and the rate of spread of linear flame fronts

(2009) S Rudz et al.   MEASUREMENT SCIENCE and TECHNOLOGY