Boost in mechanical strength of additive manufactured CoCrFeMnNi HEA by reinforcement inclusion of B4C nano-particles

Deformation behavior and strengthening effects of an eutectic AlCoCrFeNi2.1 high entropy alloy probed by in-situ synchrotron X-ray diffraction and post-mortem EBSD

(2023) Jiajia Shen et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effects of processing parameters and heat treatment on the microstructure and magnetic properties of the in-situ synthesized Fe-Ni permalloy produced using direct energy deposition

(2022) Eun Seong Kim et al.   JOURNAL OF ALLOYS AND COMPOUNDS

The subsurface deformed region and superficial protective tribo-oxide layer during wear in a non-equiatomic CoCrFeNiV high entropy alloy

(2022) Farahnaz Haftlang et al.   MATERIALS & DESIGN

Determining reliable wide-strain-range equivalent stress–strain curves using 3D digital image correlation

(2022) Gang Hee Gu et al.   Journal of Materials Research and Technology-JMR&T

Enhanced tensile properties of CrMnFeCoNi0.8 high entropy alloy with in-situ TiC particles

(2022) Sirui Huang et al.   INTERMETALLICS

Effects of Cell Network Structure on the Strength of Additively Manufactured Stainless Steels

(2021) Jung Gi Kim et al.   METALS AND MATERIALS INTERNATIONAL

Effect of B4C particles addition on microstructure and mechanical properties of Fe50Mn30Co10Cr10 high-entropy alloy

(2021) Lin Deng et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure and mechanical properties of in-situ TiC reinforced FeCoNiCu2.0 high entropy alloy matrix composites

(2021) Jifeng Zhang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Additive manufacturing of TiB2-containing CoCrFeMnNi high-entropy alloy matrix composites with high density and enhanced mechanical properties

(2021) Y.L. Wang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Spheroidisation of Stainless Steel Powder for Additive Manufacturing

(2021) Silethelwe Chikosha et al.   Metals

Solidification and microstructure evolution in additively manufactured H13 steel via directed energy deposition: Integrated experimental and computational approach

(2021) Sameehan S. Joshi et al.   Journal of Manufacturing Processes

Towards stacking fault energy engineering in FCC high entropy alloys

(2021) Tasneem Z. Khan et al.   ACTA MATERIALIA

The microstructure and mechanical properties of the additive manufactured AlCoCrFeNi high entropy alloy

(2021) Qingxuan Sui et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Laser additive manufacturing of nano-TiC particles reinforced CoCrFeMnNi high-entropy alloy matrix composites with high strength and ductility

(2021) Hongyu Chen et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

A perspective on precipitation-hardening high-entropy alloys fabricated by additive manufacturing

(2021) Farahnaz Haftlang et al.   MATERIALS & DESIGN

Origin of dislocation structures in an additively manufactured austenitic stainless steel 316L

(2020) K.M. Bertsch et al.   ACTA MATERIALIA

Friction stir processing of high-entropy alloy reinforced aluminum matrix composites for mechanical properties enhancement

(2020) Junchen Li et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

On the Thermal Stability of Dislocation Cellular Structures in Additively Manufactured Austenitic Stainless Steels: Roles of Heavy Element Segregation and Stacking Fault Energy

(2020) Pu Deng et al.   JOM

Microstructures and mechanical properties of in-situ FeCrNiCu high entropy alloy matrix composites reinforced with NbC particles

(2020) Hao Wu et al.   INTERMETALLICS

Nanoparticle-enabled phase control for arc welding of unweldable aluminum alloy 7075

(2019) Maximilian Sokoluk et al.   Nature Communications

Additive manufacturing of high-strength CrMnFeCoNi high-entropy alloys-based composites with WC addition

(2019) Jinfeng Li et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

High-entropy alloys

(2019) Easo P. George et al.   Nature Reviews Materials

Nano-scale solute heterogeneities in the ultrastrong selectively laser melted carbon-doped CoCrFeMnNi alloy

(2019) Jung Gi Kim et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Excellent mechanical properties of in-situ TiC/FeCrNiCuV0.1 high entropy alloy matrix composites

(2019) Hao Wu et al.   MATERIALS LETTERS

Elemental Effects on Weld Cracking Susceptibility in AlxCoCrCuyFeNi High-Entropy Alloy

(2019) Alexander C. Martin et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

The influence of nanoparticles on dendritic grain growth in Mg alloys

(2018) Enyu Guo et al.   ACTA MATERIALIA

Dislocation-type evolution in quasi-statically compressed polycrystalline nickel

(2018) Chaoyi Zhu et al.   ACTA MATERIALIA

Enhanced dispersoid precipitation and dispersion strengthening in an Al alloy by microalloying with Cd

(2018) Feng Qian et al.   ACTA MATERIALIA

On the role of weak interface in crack blunting process in nanoscale layered composites

(2018) Yi Li et al.   APPLIED SURFACE SCIENCE

Fabrication and characterization of WC-AlCoCrCuFeNi high-entropy alloy composites by spark plasma sintering

(2018) Wenyan Luo et al.   JOURNAL OF ALLOYS AND COMPOUNDS

A review on fundamental of high entropy alloys with promising high–temperature properties

(2018) Jian Chen et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Gradient in microstructure and mechanical property of selective laser melted AlSi10Mg

(2018) Y.J. Liu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Mechanical properties and deformation twinning behavior of as-cast CoCrFeMnNi high-entropy alloy at low and high temperatures

(2018) Jeoung Han Kim et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Additive manufacturing of metallic components – Process, structure and properties

(2018) T. DebRoy et al.   PROGRESS IN MATERIALS SCIENCE

Fabrication and mechanical properties of TiC reinforced CoCrFeMnNi high-entropy alloy composite by water atomization and spark plasma sintering

(2018) Dami Yim et al.   JOURNAL OF ALLOYS AND COMPOUNDS

CoCrFeMnNi high entropy alloy matrix nanocomposite with addition of Al 2 O 3

(2017) Łukasz Rogal et al.   INTERMETALLICS

Ultra-High Strength TiC/Refractory High-Entropy-Alloy Composite Prepared by Powder Metallurgy

(2017) Bin Liu et al.   JOM

Effect of heat treatment on AlSi10Mg alloy fabricated by selective laser melting: Microstructure evolution, mechanical properties and fracture mechanism

(2016) Wei Li et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing

(2016) Sarah K. Everton et al.   MATERIALS & DESIGN

Fabrication and mechanical properties of AlCoNiCrFe high-entropy alloy particle reinforced Cu matrix composites

(2015) Jian Chen et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Temperature dependencies of the elastic moduli and thermal expansion coefficient of an equiatomic, single-phase CoCrFeMnNi high-entropy alloy

(2015) G. Laplanche et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Fabrication and characterization of 2024 aluminium – High entropy alloy composites

(2015) K. Praveen Kumar et al.   JOURNAL OF ALLOYS AND COMPOUNDS

A fracture-resistant high-entropy alloy for cryogenic applications

(2014) B. Gludovatz et al.   SCIENCE

The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy

(2013) F. Otto et al.   ACTA MATERIALIA

Effects of Al addition on structural evolution and tensile properties of the FeCoNiCrMn high-entropy alloy system

(2013) J.Y. He et al.   ACTA MATERIALIA

Additive manufacturing and its societal impact: a literature review

(2012) Samuel H. Huang et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY