A Review on Microstructures, Mechanical Properties and Processing of High Entropy Alloys Reinforced Composite Materials

Powder metallurgical processing of Al matrix composite reinforced with AlSiCrMnFeNiCu high-entropy alloys: Microstructure, thermal stability, and microhardness

(2023) Yagnesh Shadangi et al.   JOURNAL OF MATERIALS RESEARCH

A novel strategy for rapid fabrication of continuous carbon fiber reinforced (TiZrHfNbTa)C high-entropy ceramic composites: High-entropy alloy in-situ reactive melt infiltration

(2023) Wenjian Guo et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Ti-containing High-Entropy Alloys for Aeroengine Turbine Applications

(2023) R. Canumalla et al.   Materials Research-Ibero-american Journal of Materials

Microstructure and properties of FeCoNiCrAl high-entropy alloy particle-reinforced Cu-matrix composites prepared via FSP

(2023) Rui Zhu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Formation mechanism of interdiffusion layer and mechanical properties of Al0.6CoCrFeNi high-entropy alloy/Ti composites

(2023) Fei Qiang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Novel strength-electrical conductivity synergy in Cu-based composites reinforced with TiZrNbTa high entropy alloy

(2023) Jie Chen et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure and Mechanical Properties of Biomedical Ti-Zr-Nb-Ta-Sn High-Entropy Alloys

(2023) Maxim Ozerov et al.   Metals

Microstructure and wear resistance of in-situ TiN/(Nb, Ti)5Si3 reinforced MoNbTaWTi-based refractory high entropy alloy composite coatings by laser cladding

(2023) Xuanhong Hao et al.   APPLIED SURFACE SCIENCE

Microstructures and formation mechanism of continuous carbon fiber-reinforced (TiZrHfNbTa)C high-entropy ceramic composites fabricated via high-entropy alloy reactive melt infiltration

(2023) Haoran He et al.   Ceramics International

Microstructure and mechanical properties of CrMnFeCoNi high entropy alloy/Al composite with different reinforcement content

(2023) Yan Wang et al.   Journal of Alloys and Compounds

Microstructure evolution and tensile property of high entropy alloy particle reinforced 316 L stainless steel matrix composites fabricated by laser powder bed fusion

(2023) Xinqi Zhang et al.   Journal of Alloys and Compounds

Enhanced mechanical properties of aluminum matrix composites reinforced with high-entropy alloy particles via asymmetric cryorolling

(2023) Kai-guang LUO et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Microstructural and Tribological Behavior of Thermal Spray CrMnFeCoNi High Entropy Alloy Coatings

(2022) Payank Patel et al.   JOURNAL OF THERMAL SPRAY TECHNOLOGY

High entropy alloy reinforced aluminum matrix composites prepared by novel rotation friction extrusion process: Microstructure and mechanical properties

(2022) Yan Wang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effects of hBN and Y2O3 Addition on Mechanical and Tribological Behavior of SiC Ceramic Matrix Composites Prepared by Spark Plasma Sintering

(2022) Deepak Kumar et al.   Silicon

Strong and ductile FeNiCoAl-based high-entropy alloys for cryogenic to elevated temperature multifunctional applications

(2022) Cheng Zhang et al.   ACTA MATERIALIA

Corrosion resistance of WC-based cemented carbides with 10 wt% AlxCrCoCuFeNi high-entropy alloy binders

(2022) Wenyan Luo et al.   INTERMETALLICS

Deformation mechanisms of primary γ′ precipitates in nickel-based superalloy

(2022) Hongkai Zhang et al.   SCRIPTA MATERIALIA

Synthesis of sodium alginate/carboxy-methyl cellulose/Cu-based metal-organic framework composite for adsorption of tetracycline from aqueous solution: Isotherm, kinetic and thermodynamic approach

(2022) Atefeh Ehsani et al.   Surfaces and Interfaces

Microstructure and Corrosion Performance of Aluminium Matrix Composites Reinforced with Refractory High-Entropy Alloy Particulates

(2021) Elias Ananiadis et al.   Applied Sciences-Basel

An Overview of High-Entropy Alloys as Biomaterials

(2021) Diogo Castro et al.   Metals

Additive manufacturing of TiB2-containing CoCrFeMnNi high-entropy alloy matrix composites with high density and enhanced mechanical properties

(2021) Y.L. Wang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Recent advances of high entropy alloys for aerospace applications: a review

(2021) Modupeola Dada et al.   World Journal of Engineering

Preparation, mechanical and tribological properties of WC-Al2O3 composite doped with graphene platelets

(2020) Xiaoxiao Zhang et al.   CERAMICS INTERNATIONAL

Friction stir processing of high-entropy alloy reinforced aluminum matrix composites for mechanical properties enhancement

(2020) Junchen Li et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Functional properties and promising applications of high entropy alloys

(2020) Xuehui Yan et al.   SCRIPTA MATERIALIA

Microstructure and thermal conductivity of Cu-Cu2AlNiZnAg/diamond coatings on pure copper substrate via high-energy mechanical alloying method

(2020) Jiajun Zang et al.   Surfaces and Interfaces

High-entropy alloys fabricated via powder metallurgy. A critical review

(2019) J. M. Torralba et al.   POWDER METALLURGY

High-entropy alloys by mechanical alloying: A review

(2019) Mayur Vaidya et al.   JOURNAL OF MATERIALS RESEARCH

Effects of ZrB2 reinforcement on microstructure and mechanical properties of a spark plasma sintered mullite-CNT composite

(2019) Yasin Orooji et al.   CERAMICS INTERNATIONAL

Effect of ball milling on microstructure and mechanical properties of 6061Al matrix composites reinforced with high-entropy alloy particles

(2019) Weiping Chen et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure and properties of high-entropy alloy reinforced aluminum matrix composites by spark plasma sintering

(2019) Zhanwei Yuan et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Fabrication and characterization of WC-AlCoCrCuFeNi high-entropy alloy composites by spark plasma sintering

(2018) Wenyan Luo et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Fabrication and characterization of WC-HEA cemented carbide based on the CoCrFeNiMn high entropy alloy

(2018) Irene L. Velo et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Improved structural homogeneity and mechanical properties of nanoparticles reinforced Al composites after orthogonal thermomechanical processes

(2018) Jun Liu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

The influence of nanocrystalline CoNiFeAl 0.4 Ti 0.6 Cr 0.5 high-entropy alloy particles addition on microstructure and mechanical properties of SiC p /7075Al composites

(2018) Tiwen Lu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Simultaneously increasing strength and ductility of nanoparticles reinforced Al composites via accumulative orthogonal extrusion process

(2018) Jun Liu et al.   Materials Research Letters

A high-entropy alloy with hierarchical nanoprecipitates and ultrahigh strength

(2018) Zhiqiang Fu et al.   Science Advances

Formation of transition layer and its effect on mechanical properties of AlCoCrFeNi high-entropy alloy/Al composites

(2018) Yunzi Liu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Processing and characterization of TiB2 -TiNiFeCrCoAl high-entropy alloy composite

(2017) Zhezhen Fu et al.   JOURNAL OF THE AMERICAN CERAMIC SOCIETY

Ultrafine TiB 2 -TiNiFeCrCoAl high-entropy alloy composite with enhanced mechanical properties

(2017) Zhezhen Fu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

3D printing of high-strength aluminium alloys

(2017) John H. Martin et al.   NATURE

Simultaneously enhanced strength and ductility of Mg-Zn-Zr-Ca alloy with fully recrystallized ultrafine grained structures

(2017) Ruixiao Zheng et al.   SCRIPTA MATERIALIA

Enhanced thermal stability and ductility in a nanostructured Ni-based alloy

(2017) Yanle Sun et al.   SCRIPTA MATERIALIA

Formation of Nanoscale Metallic Glassy Particle Reinforced Al-Based Composite Powders by High-Energy Milling

(2017) et al.   Metals

Thermal stability and grain boundary strengthening in ultrafine-grained CoCrFeNi high entropy alloy composite

(2017) Praveen Sathiyamoorthi et al.   MATERIALS & DESIGN

Microstructure and strengthening mechanisms in an FCC structured single-phase nanocrystalline Co 25 Ni 25 Fe 25 Al 7.5 Cu 17.5 high-entropy alloy

(2016) Zhiqiang Fu et al.   ACTA MATERIALIA

Synthesis of TiC-TiB 2 composite powders from carbon coated TiO 2 precursors

(2016) Zhezhen Fu et al.   CERAMICS INTERNATIONAL

High-entropy alloys: a critical assessment of their founding principles and future prospects

(2016) E. J. Pickering et al.   INTERNATIONAL MATERIALS REVIEWS

Sintering and mechanical properties of TiB 2 -TiC-Ni using submicron borides and carbides

(2016) Zhezhen Fu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

High-entropy alloy: challenges and prospects

(2016) Y.F. Ye et al.   Materials Today

Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures

(2016) Bernd Gludovatz et al.   Nature Communications

High-entropy alloy particle reinforced Al-based amorphous alloy composite with ultrahigh strength prepared by spark plasma sintering

(2016) Zhen Tan et al.   MATERIALS & DESIGN

Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation

(2015) B. Schuh et al.   ACTA MATERIALIA

Tensile properties of Al–12Si matrix composites reinforced with Ti–Al-based particles

(2015) Z. Wang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microstructure and mechanical properties of Mo-free Ti(C,N)-based cermets with Ni–xCr binders

(2015) Qingqing Yang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Fabrication and properties of TiB 2 -based cermets by spark plasma sintering with CoCrFeNiTiAl high-entropy alloy as sintering aid

(2015) Wei Ji et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Fabrication of Ti–Al3Ti core–shell structured particle reinforced Al based composite with promising mechanical properties

(2015) Baisong Guo et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Processing and properties of magnesium containing a dense uniform dispersion of nanoparticles

(2015) Lian-Yi Chen et al.   NATURE

Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility

(2015) Xiaolei Wu et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

Exploration and Development of High Entropy Alloys for Structural Applications

(2014) Daniel Miracle et al.   Entropy

Effects of TiC content and melt phase on microstructure and mechanical properties of ternary TiB2-based ceramic cutting tool materials

(2014) Jinpeng Song et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Rapid control of phase growth by nanoparticles

(2014) Lian-Yi Chen et al.   Nature Communications

High-Entropy Alloys: A Critical Review

(2014) Ming-Hung Tsai et al.   Materials Research Letters

Sluggish diffusion in Co–Cr–Fe–Mn–Ni high-entropy alloys

(2013) K.-Y. Tsai et al.   ACTA MATERIALIA

Tensile properties of high- and medium-entropy alloys

(2013) A. Gali et al.   INTERMETALLICS

More than entropy in high-entropy alloys: Forming solid solutions or amorphous phase

(2013) Sheng Guo et al.   INTERMETALLICS

Alloy Design Strategies and Future Trends in High-Entropy Alloys

(2013) Jien-Wei Yeh   JOM

Micromechanical behavior study of α phase with different morphologies of Ti–6Al–4V alloy by microindentation

(2013) Junzhe Dong et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure and corrosion performance of Al-32%Co alloys

(2012) A. Lekatou et al.   CORROSION SCIENCE

Mechanical properties and microstructure of TiB2–TiC composite ceramic cutting tool material

(2012) Bin Zou et al.   INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS

Mechanical properties and wear behavior of Al–2wt.% Cu alloy composites reinforced by B4C nanoparticles and fabricated by mechanical milling and hot extrusion

(2012) A. Alizadeh et al.   MATERIALS CHARACTERIZATION

Prediction of high-entropy stabilized solid-solution in multi-component alloys

(2012) X. Yang et al.   MATERIALS CHEMISTRY AND PHYSICS

Determination of nanoindentation size effects and variable material intrinsic length scale for body-centered cubic metals

(2011) Danial Faghihi et al.   MECHANICS OF MATERIALS

Solid-Solution Phase Formation Rules for Multi-component Alloys

(2008) Y. Zhang et al.   ADVANCED ENGINEERING MATERIALS

Friction Stir Processing Technology: A Review

(2008) Z.Y. Ma   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Synthesis and characterization of nanocrystalline AlFeTiCrZnCu high entropy solid solution by mechanical alloying

(2007) S. Varalakshmi et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effect of thixocasting and heat treatment on the tribological properties of hypoeutectic Al–Si alloy

(2007) A. Vencl et al.   WEAR