Investigations on austenite stability and martensitic transformation kinetics of a medium Mn steel under different strain states

Martensitic transformation induced planar deformation of AlN nanoprecipitates in high nitrogen stainless steels

(2023) Yumeng Zhang et al.   INTERNATIONAL JOURNAL OF PLASTICITY

A novel crystal plasticity model incorporating transformation induced plasticity for a wide range of strain rates and temperatures

(2022) D.S. Connolly et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Microstructural evolution and strain hardening behavior of a novel two-stage warm rolled ultra-high strength medium Mn steel with heterogeneous structures

(2022) Yuming Zou et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Interstitial-driven local chemical order enables ultrastrong face-centered cubic multicomponent alloys

(2022) Zhufeng He et al.   ACTA MATERIALIA

Crystal plasticity modeling of strain-induced martensitic transformations to predict strain rate and temperature sensitive behavior of 304 L steels: Applications to tension, compression, torsion, and impact

(2022) Zhangxi Feng et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Tailoring retained austenite and mechanical property improvement in Al–Si–V containing medium Mn steel via direct intercritical rolling

(2022) Jun Hu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Mechanical, microstructural and in-situ neutron diffraction investigations of equi-biaxial Bauschinger effects in an interstitial-free DC06 steel

(2022) Markus Härtel et al.   INTERNATIONAL JOURNAL OF PLASTICITY

A cyclic plasticity model for secondary hardening due to strain-induced martensitic transformation

(2021) Cainã Bemfica et al.   INTERNATIONAL JOURNAL OF PLASTICITY

New insights to understand the strain-state-dependent austenite stability in a medium Mn steel: An experimental and theoretical investigation

(2021) Yonggang Yang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

A micromechanical model for heterogeneous nanograined metals with shape effect of inclusions and geometrically necessary dislocation pileups at the domain boundary

(2021) Jianjun Li et al.   INTERNATIONAL JOURNAL OF PLASTICITY

The effect of stress state and strain partition mode on the damage behavior of a Mg-Ca alloy

(2021) Xiaoqing Shang et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Strength-ductility synergy in a 1.4 GPa austenitic steel with a heterogeneous lamellar microstructure

(2021) Gang Niu et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Abnormal TRIP effect on the work hardening behavior of a quenching and partitioning steel at high strain rate

(2020) M. Wang et al.   ACTA MATERIALIA

Investigations of dislocation-type evolution and strain hardening during mechanical twinning in Fe-22Mn-0.6C twinning-induced plasticity steel

(2020) Huihui Zhi et al.   ACTA MATERIALIA

Stress-assisted (γ→α′) and strain-induced (γ→ε→α’) phase transformation kinetics laws implemented in a crystal plasticity model for predicting strain path sensitive deformation of austenitic steels

(2020) Zhangxi Feng et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Intercritical annealing to achieve a positive strain-rate sensitivity of mechanical properties and suppression of macroscopic plastic instabilities in multi-phase medium-Mn steels

(2020) J.T. Benzing et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Deformation mechanisms of a novel Mn-based 1 GPa TRIP/TWIP assisted lightweight steel with 63% ductility

(2020) Shenghui Sun et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Machine-learning based temperature- and rate-dependent plasticity model: Application to analysis of fracture experiments on DP steel

(2019) Xueyang Li et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Crystal Plasticity Modeling of 3rd Generation Multi-phase AHSS with Martensitic Transformation

(2019) Taejoon Park et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Fracture of an anisotropic rare-earth-containing magnesium alloy (ZEK100) at different stress states and strain rates: Experiments and modeling

(2019) Saadi A. Habib et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Revealing orientation-dependent martensitic transformation in a medium Mn steel by micropillar compression

(2019) O.G. Nimaga et al.   INTERNATIONAL JOURNAL OF PLASTICITY

On the measurement of dislocations and dislocation substructures using EBSD and HRSD techniques

(2019) O. Muránsky et al.   ACTA MATERIALIA

Revealing extra strengthening and strain hardening in heterogeneous two-phase nanostructures [accolade6]?-->

(2019) Jianjun Li et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Dependence of hydrogen embrittlement mechanisms on microstructure-driven hydrogen distribution in medium Mn steels

(2019) Binhan Sun et al.   ACTA MATERIALIA

Diffraction-based misorientation mapping: A continuum mechanics description

(2019) Shao-Shi Rui et al.   JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS

The Role of Transformation-Induced Plasticity in the Development of Advanced High Strength Steels

(2018) Li Liu et al.   ADVANCED ENGINEERING MATERIALS

Ductile damage mechanism under shear-dominated loading: In-situ tomography experiments on dual phase steel and localization analysis

(2018) Christian C. Roth et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Strain Rate Effect on Tensile Flow Behavior and Anisotropy of a Medium-Manganese TRIP Steel

(2018) Rakan Alturk et al.   JOM

Ensuring combination of strength, ductility and toughness in medium-manganese steel through optimization of nano-scale metastable austenite

(2018) Jun Hu et al.   MATERIALS CHARACTERIZATION

The deformation induced martensitic transformation and mechanical behavior of quenching and partitioning steels under complex loading process

(2018) DQ. Zou et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Impact of intercritical annealing temperature and strain state on mechanical stability of retained austenite in medium Mn steel

(2018) Yong-Gang Yang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Ultrafine also can be ductile: On the essence of Lüders band elongation in ultrafine-grained medium manganese steel

(2018) Y. Zhang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

A normalized stress invariant-based yield criterion: Modeling and validation

(2017) Qi Hu et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Investigation of plastic strain rate under strain path changes in dual-phase steel using microstructure-based modeling

(2017) Jinjin Ha et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Dislocation activities at the martensite phase transformation interface in metastable austenitic stainless steel: An in-situ TEM study

(2017) Jiabin Liu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

High dislocation density–induced large ductility in deformed and partitioned steels

(2017) B. B. He et al.   SCIENCE

Resolving geometrically necessary dislocation density onto individual dislocation types using EBSD-based continuum dislocation microscopy

(2016) T.J. Ruggles et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Experimental investigation on a novel medium Mn steel combining transformation-induced plasticity and twinning-induced plasticity effects

(2016) B.B. He et al.   INTERNATIONAL JOURNAL OF PLASTICITY

On fracture in finite strain gradient plasticity

(2016) E. Martínez-Pañeda et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Elevated-temperature mechanical stability and transformation behavior of retained austenite in a quenching and partitioning steel

(2016) Junying Min et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

In-situ study of the deformation-induced rotation and transformation of retained austenite in a low-carbon steel treated by the quenching and partitioning process

(2016) W.S. Li et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Experiment and modeling to investigate the effect of stress state, strain and temperature on martensitic phase transformation in TRIP-assisted steel

(2015) Hwigeon Kim et al.   ACTA MATERIALIA

Interplay between grain structure, deformation mechanisms and austenite stability in phase-reversion-induced nanograined/ultrafine-grained austenitic ferrous alloy

(2015) R.D.K. Misra et al.   ACTA MATERIALIA

A Transmission Kikuchi Diffraction Study of a Cold-Rolled and Annealed Fe-17Mn-2Si-3Al-1Ni-0.06C wt% Steel

(2015) Azdiar A. Gazder et al.   STEEL RESEARCH INTERNATIONAL

Smaller is less stable: Size effects on twinning vs. transformation of reverted austenite in TRIP-maraging steels

(2014) M-M. Wang et al.   ACTA MATERIALIA

Effect of strain rate on ductile fracture initiation in advanced high strength steel sheets: Experiments and modeling

(2014) Christian C. Roth et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Characterization of microstructures and tensile properties of TRIP-aided steels with different matrix microstructure

(2014) Chao Wang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effects of Al on microstructure and tensile properties of C-bearing high Mn TWIP steel

(2012) J.-E. Jin et al.   ACTA MATERIALIA

Quantification of the effect of transformation-induced geometrically necessary dislocations on the flow-curve modelling of dual-phase steels

(2012) A. Ramazani et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Anisotropic plasticity model coupled with Lode angle dependent strain-induced transformation kinetics law

(2012) Allison M. Beese et al.   JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS

Effect of stress triaxiality and Lode angle on the kinetics of strain-induced austenite-to-martensite transformation

(2011) Allison M. Beese et al.   ACTA MATERIALIA

Quasi-static and dynamic responses of advanced high strength steels: Experiments and modeling

(2011) Akhtar S. Khan et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Prediction of martensitic transformation and deformation behavior in the TRIP steel sheet forming

(2008) T.K. Shan et al.   MATERIALS & DESIGN

A new model of metal plasticity and fracture with pressure and Lode dependence

(2007) Yuanli Bai et al.   INTERNATIONAL JOURNAL OF PLASTICITY