Microstructure characteristics and mechanical properties of TiAl alloy joint brazed with CoCuFeNiTi1.2V0.4 high entropy alloy filler

Deformation behavior and strengthening effects of an eutectic AlCoCrFeNi2.1 high entropy alloy probed by in-situ synchrotron X-ray diffraction and post-mortem EBSD

(2023) Jiajia Shen et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Brazing of TiAl and Ti2AlNb alloys using high-entropy braze fillers

(2022) Z. Sun et al.   MATERIALS CHARACTERIZATION

Study on 3-dimensional graphene sponge reinforced C/C composites-TiAl alloy brazed joints

(2022) Z. Sun et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Brazing SiC ceramics and Zr with CoCrFeNiCuSn high entropy alloy

(2022) Zhenyuan Luo et al.   CERAMICS INTERNATIONAL

Microstructure and mechanical properties of Ti2AlNb diffusion bonding using multi-phase refractory high-entropy alloy interlayer

(2022) Yajie Du et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of Ti-Hf-Zr-Cu-Ni high entropy alloy addition on laser beam welded joint of Ti2AlNb based intermetallic alloy

(2022) Mirza Zahid Hussain et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

An experimentally driven high-throughput approach to design refractory high-entropy alloys

(2022) Chanho Lee et al.   MATERIALS & DESIGN

Gas tungsten arc welding of as-cast AlCoCrFeNi2.1 eutectic high entropy alloy

(2022) Jiajia Shen et al.   MATERIALS & DESIGN

Vacuum brazing of YSZ ceramic and TC4 alloy with a Ti20Zr20Hf20Cu20Ni20 high entropy amorphous alloy

(2022) Yuzheng Liang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure and mechanical properties of TiAl/TiAl joints brazed with a newly developed Ti–Ni–Nb–Zr quaternary filler alloy

(2022) H.S. Ren et al.   Progress in Natural Science-Materials International

Development of gamma titanium aluminide (γ-TiAl) alloys: A review

(2022) Ozge Genc et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microstructure and mechanical properties of gas metal arc welded CoCrFeMnNi joints using a 308 stainless steel filler metal

(2022) Jiajia Shen et al.   SCRIPTA MATERIALIA

TiAl/IN718 dissimilar brazing with TiZrNiCuCo high-entropy filler metal: phase characterization and fractography

(2021) Dariush Kokabi et al.   Welding in the World

Microstructure evolution and mechanical properties of high Nb–TiAl alloy/GH4169 joints brazed using CuTiZrNi amorphous filler alloy

(2021) Duo Dong et al.   INTERMETALLICS

Vacuum brazing TiAl intermetallics to GH3030 alloy with a multi-component Ti-based filler metal

(2021) Shuai Li et al.   Journal of Manufacturing Processes

Vanadium is an optimal element for strengthening in both fcc and bcc high-entropy alloys

(2020) Binglun Yin et al.   ACTA MATERIALIA

Diffusion bonding of AlCoCrFeNi2.1 eutectic high entropy alloy to TiAl alloy

(2020) Peng Li et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Effect of Ti content on microstructure and mechanical properties of CuCoFeNi high-entropy alloys

(2020) Xi-cong Ye et al.   International Journal of Minerals Metallurgy and Materials

A new strategy for high-strength joining of dissimilar materials

(2020) Kewei Dong et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Investigation of cracks during electron beam welding of γ-TiAl based alloy

(2020) Guoqing Chen et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Excellent strength-ductility synergy in a novel single-phase equiatomic CoFeNiTiV high entropy alloy

(2020) Jiaojiao Yi et al.   INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS

Vacuum brazing of Ti6Al4V alloy to 316L stainless steel using a Ti-Cu-based amorphous filler metal

(2019) Yueqing Xia et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

On the competition between dislocation transmission and crack nucleation at phase boundaries

(2019) F. Bormann et al.   EUROPEAN JOURNAL OF MECHANICS A-SOLIDS

Microstructure stability and micro-mechanical behavior of as-cast gamma-TiAl alloy during high-temperature low cycle fatigue

(2018) Jie Ding et al.   ACTA MATERIALIA

Bulk tracer diffusion in CoCrFeNi and CoCrFeMnNi high entropy alloys

(2018) M. Vaidya et al.   ACTA MATERIALIA

Effect of brazing temperature and brazing time on the microstructure and tensile strength of TiAl-based alloy joints with Ti-Zr-Cu-Ni amorphous alloy as filler metal

(2017) Y.S. Cai et al.   INTERMETALLICS

Vacuum brazing high Nb-containing TiAl alloy to Ti60 alloy using Ti-28Ni eutectic brazing alloy

(2017) Xiaoguo Song et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microstructure Evolution and Mechanical Properties of Ti-43Al-9V-0.3Y Alloy Joints Brazed With Ti-Zr-Ni-Cu + Mo Composite Filler 

(2016) Ying Wang et al.   ADVANCED ENGINEERING MATERIALS

Microstructures and Mechanical Properties of Vacuum Brazed Ti3Al/TiAl Joints Using Two Ti-based Filler Metals

(2016) H.S. Ren et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Hot deformation behaviour and processing map of Co-Cu-Fe-Ni-Ti eutectic high entropy alloy

(2016) Sumanta Samal et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Interfacial microstructure and mechanical properties of ZrB 2 SiC C ceramic and GH99 superalloy joints brazed with a Ti-modified FeCoNiCrCu high-entropy alloy

(2016) L.X. Zhang et al.   MATERIALS & DESIGN

Microstructure and mechanical properties of TiAl alloy joints vacuum brazed with Ti–Zr–Ni–Cu brazing powder without and with Mo additive

(2016) Qiwen Qiu et al.   MATERIALS & DESIGN

Effect of processing route on phase stability in equiatomic multicomponent Ti20Fe20Ni20Co20Cu20high entropy alloy

(2015) S. Mohanty et al.   MATERIALS SCIENCE AND TECHNOLOGY

Effect of Interfacial Microstructure Evolution on Mechanical Properties and Fracture Behavior of Friction Stir-Welded Al-Cu Joints

(2015) P. Xue et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Hot deformation behaviour and microstructure control in AlCrCuNiFeCo high entropy alloy

(2014) Niraj Nayan et al.   INTERMETALLICS

High-Entropy Alloys: A Critical Review

(2014) Ming-Hung Tsai et al.   Materials Research Letters

An investigation of Ti-43Al-9V/Ti-6Al-4V interface by diffusion bonding

(2013) X.R. Wang et al.   INTERMETALLICS

Microstructures and properties of high-entropy alloys

(2013) Yong Zhang et al.   PROGRESS IN MATERIALS SCIENCE

Prediction of high-entropy stabilized solid-solution in multi-component alloys

(2012) X. Yang et al.   MATERIALS CHEMISTRY AND PHYSICS

Brazing TiAl intermetallics using TiNi–V eutectic brazing alloy

(2012) X.G. Song et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Phase stability in high entropy alloys: Formation of solid-solution phase or amorphous phase

(2012) Sheng GUO et al.   Progress in Natural Science-Materials International

Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys

(2011) Sheng Guo et al.   JOURNAL OF APPLIED PHYSICS

Microstructure and mechanical properties of large size as-cast Ti–43Al–9V–0.2Y (at.%) alloy ingot from brim to centre

(2011) Fantao Kong et al.   MATERIALS & DESIGN

Constitution of Ni–Al–Ti system studied by scanning electron microscopy

(2009) Jiří Buršík et al.   INTERMETALLICS

Hot pressing diffusion bonding of a titanium alloy to a stainless steel with an aluminum alloy interlayer

(2007) P. He et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING