The influence of a novel ribbed wave tape on the enhancement of heat transfer in a solar air heater operating in a transitional flow regime: an experimental study

Numerical and experimental study of the influence of extended surfaces in rectangular channel subjected to constant heat flux

(2023) Haneen M. Al-Ali et al.   EXPERIMENTAL HEAT TRANSFER

Development of correlations for predicting Nusselt number and friction factor of roughened solar air heater duct for sustainable development

(2023) Karmveer et al.   EXPERIMENTAL HEAT TRANSFER

Experimental and numerical study of thermal-hydraulic performance in a heat exchanger tube with circular ring’s angular cutting inserts

(2022) Seyed Hadi Banihashemi et al.   EXPERIMENTAL HEAT TRANSFER

Thermal performance enhancement in heat exchangers using active and passive techniques: a detailed review

(2022) Suvanjan Bhattacharyya et al.   JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

Heat transfer performance of microchannels with round grooves and ribs based on field synergy principle and entropy production analysis

(2022) Tingbo Hou et al.   EXPERIMENTAL HEAT TRANSFER

Influences of twisted turbulators arrangements on heat transfer and airflow resistance over absorber plate of solar air heater

(2022) Morteza Khoshvaght-Aliabadi et al.   EXPERIMENTAL HEAT TRANSFER

Thermo-hydraulic characteristics of magnetic nanofluid in opposing and assisting minichannel under the influence of external magnetic field

(2022) Suvanjan Bhattacharyya et al.   PHYSICS OF FLUIDS

Performance optimization of a wavy finned-tube heat exchanger with staggered curved vortex generators

(2022) DongLiang Hu et al.   INTERNATIONAL JOURNAL OF THERMAL SCIENCES

Turbulent thermal-hydraulic characteristics in a spiral corrugated waste heat recovery heat exchanger with perforated multiple twisted tapes

(2022) Yuxiang Hong et al.   INTERNATIONAL JOURNAL OF THERMAL SCIENCES

Investigation of effects on turbulent heat transfer of twisted wavy tape elements in the tube

(2022) Aziz Hakan Altun et al.   INTERNATIONAL JOURNAL OF THERMAL SCIENCES

Turbulent Flow Heat Transfer through a Circular Tube with Novel Hybrid Grooved Tape Inserts: Thermohydraulic Analysis and Prediction by Applying Machine Learning Model

(2021) Suvanjan Bhattacharyya et al.   Sustainability

Heat and Fluid Flow Analysis and ANN-Based Prediction of a Novel Spring Corrugated Tape

(2021) Basma Souayeh et al.   Sustainability

Experimental examination of condensation heat transfer enhancement with different perforated tube inserts

(2021) A. Vaisi et al.   EXPERIMENTAL HEAT TRANSFER

Experimental and CFD survey of indirect solar dryer modified with low-cost iron mesh

(2020) Hande Özge Güler et al.   SOLAR ENERGY

The effect of circular hole spring tape on the turbulent heat transfer and entropy analysis in a heat exchanger tube: an experimental study

(2020) Suvanjan Bhattacharyya et al.   EXPERIMENTAL HEAT TRANSFER

Numerical study on turbulent heat transfer performance of a new parallel-flow shell and tube heat exchanger with sinusoidal wavy tapes using RSM analysis

(2019) Chulin Yu et al.   APPLIED THERMAL ENGINEERING

Experimental investigation of convection heat transfer in the transition flow regime of aluminium oxide-water nanofluids in a rectangular channel

(2019) Sohaib Osman et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Heat transfer augmentation of internal flow using twisted tape insert in turbulent flow

(2019) Agung Tri Wijayanta et al.   HEAT TRANSFER ENGINEERING

Influence of inlet contraction ratios on the heat transfer and pressure drop characteristics of single-phase flow in smooth circular tubes in the transitional flow regime

(2019) A.I. Bashir et al.   EXPERIMENTAL THERMAL AND FLUID SCIENCE

Single-phase mixed convective heat transfer and pressure drop in the laminar and transitional flow regimes in smooth inclined tubes heated at a constant heat flux

(2019) J.P. Meyer et al.   EXPERIMENTAL THERMAL AND FLUID SCIENCE

Exergo-environmental analysis of an indirect forced convection solar dryer for drying bitter gourd slices

(2019) S. Vijayan et al.   RENEWABLE ENERGY

Heat transfer and pressure drop in the transitional flow regime for a smooth circular tube with twisted tape inserts and a square-edged inlet

(2018) J.P. Meyer et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Relationship between pressure drop and heat transfer of developing and fully developed flow in smooth horizontal circular tubes in the laminar, transitional, quasi-turbulent and turbulent flow regimes

(2018) M. Everts et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Performance prediction of extended surface absorber solar air collector with twisted tape inserts

(2018) Rajesh Kumar et al.   SOLAR ENERGY

Double-sided delta-wing tape inserts to enhance convective heat transfer and fluid flow characteristics of a double-pipe heat exchanger

(2018) Agung Tri Wijayanta et al.   APPLIED THERMAL ENGINEERING

Experimental investigation of heat transfer performance of corrugated tube with spring tape inserts

(2018) Suvanjan Bhattacharyya et al.   EXPERIMENTAL HEAT TRANSFER

Numerical investigation of heat transfer and flow characteristics of laminar flow in a tube with center-tapered wavy-tape insert

(2018) Yunmin Liang et al.   APPLIED THERMAL ENGINEERING

Heat transfer and pressure drop characteristics of alternating clockwise and counter clockwise twisted tape inserts in the transitional flow regime

(2018) S.M. Abolarin et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

The influence of peripheral u-cut twisted tapes and ring inserts on the heat transfer and pressure drop characteristics in the transitional flow regime

(2018) S.M. Abolarin et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Energy and exergy analysis of a mixed-mode greenhouse-type solar dryer, integrated with partially covered N-PVT air collector

(2017) Sumit Tiwari et al.   ENERGY

Wavy-tape insert designed for managing highly concentrated solar energy on absorber tube of parabolic trough receiver

(2017) Xiaowei Zhu et al.   ENERGY

A novel wavy-tape insert configuration for pipe heat transfer augmentation

(2016) Xiao Wei Zhu et al.   ENERGY CONVERSION AND MANAGEMENT

Experimental investigation on heat transfer and fluid friction correlations for circular tubes with coiled-wire inserts

(2015) Jung-Yang San et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

Heat transfer enhancement of laminar and transitional Newtonian and non-Newtonian flows in tubes with wire coil inserts

(2014) D.S. Martínez et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Heat Transfer Behavior in a Square Duct with Tandem Wire Coil Element Insert

(2012) Eiamsa-ard Smith et al.   CHINESE JOURNAL OF CHEMICAL ENGINEERING

Heat transfer enhancement in a tube with twisted tape inserts placed separately from the tube wall

(2012) Halit Bas et al.   EXPERIMENTAL THERMAL AND FLUID SCIENCE

Effect of inlet geometries and heating on the entrance and fully-developed friction factors in the laminar and transition regions of a horizontal tube

(2012) Hou Kuan Tam et al.   EXPERIMENTAL THERMAL AND FLUID SCIENCE

Experimental study on heat transfer and pressure drop of nanofluid flow in a horizontal coiled wire inserted tube under constant heat flux

(2011) M. Saeedinia et al.   EXPERIMENTAL THERMAL AND FLUID SCIENCE

Single-Phase Heat Transfer and Pressure Drop of the Cooling of Water inside Smooth Tubes for Transitional Flow with Different Inlet Geometries (RP-1280)

(2011) J. A. Olivier et al.   HVAC&R RESEARCH

Numerical investigation of heat transfer and pressure drop in enhanced tubes

(2011) Özden Ağra et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

Heat transfer enhancement in a tube with equilateral triangle cross sectioned coiled wire inserts

(2010) Sibel Gunes et al.   EXPERIMENTAL THERMAL AND FLUID SCIENCE

Thermohydraulic investigation of turbulent flow through a round tube equipped with twisted tapes consisting of centre wings and alternate-axes

(2010) S. Eiamsa-ard et al.   EXPERIMENTAL THERMAL AND FLUID SCIENCE

Experimental Investigation of Friction Factor in the Transition Region for Water Flow in Minitubes and Microtubes

(2010) Afshin J. Ghajar et al.   HEAT TRANSFER ENGINEERING

Transitional flow inside enhanced tubes for fully developed and developing flow with different types of inlet disturbances: Part II–heat transfer

(2010) J.P. Meyer et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Transitional flow inside enhanced tubes for fully developed and developing flow with different types of inlet disturbances: Part I – Adiabatic pressure drops

(2010) J.P. Meyer et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Turbulent heat transfer enhancement by counter/co-swirling flow in a tube fitted with twin twisted tapes

(2009) S. Eiamsa-ard et al.   EXPERIMENTAL THERMAL AND FLUID SCIENCE