Towards the work hardening and strain delocalization achieved via in-situ intragranular reinforcement in Al-CuO composite

Achieving high mechanical properties and corrosion resistance of Al-Zn-Mg matrix composites via regulating intragranular reinforcements

(2023) Xudong Rong et al.   Journal of Materials Science & Technology

Nanotwinning-assisted dynamic recrystallization at high strains and strain rates

(2022) Ahmed A. Tiamiyu et al.   NATURE MATERIALS

Enhanced hardening by multiple microalloying in low carbon ferritic steels with interphase precipitation

(2022) Yongjie Zhang et al.   SCRIPTA MATERIALIA

Achieving the strength-ductility balance of boron nitride nanosheets/Al composite by designing the synergistic transition interface and intragranular reinforcement distribution

(2022) Lishi Ma et al.   COMPOSITES PART B-ENGINEERING

Breakdown of the Hall-Petch relationship in extremely fine nanograined body-centered cubic Mo alloys

(2021) F.H. Duan et al.   ACTA MATERIALIA

Reinforcement with intragranular dispersion of carbon nanotubes in aluminum matrix composites

(2021) Qibing Liu et al.   COMPOSITES PART B-ENGINEERING

Strengthening mechanisms in CrMoNbTiW refractory high entropy alloy

(2021) Lavanya Raman et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

In-situ Al2O3-Al interface contribution towards the strength-ductility synergy of Al-CuO composite fabricated by solid-state reactive sintering

(2021) Xudong Rong et al.   SCRIPTA MATERIALIA

Superior strength-ductility synergy and strain hardenability of Al/Ta co-doped NiCoCr twinned medium entropy alloy for cryogenic applications

(2021) D.D. Zhang et al.   ACTA MATERIALIA

Microstructural characteristic and mechanical properties of the in-situ MgAl2O4 reinforced Al matrix composite based on Al-Mg-ZnO system

(2021) Longjiang Jia et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Achieving high hetero-deformation induced (HDI) strengthening and hardening in brass by dual heterostructures

(2021) X.T. Fang et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Stress response and microstructural evolution of nickel-based superalloys during low cycle fatigue: Physics-based modelling of cyclic hardening and softening

(2020) F.D. León-Cázares et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Nanoscale precipitates as sustainable dislocation sources for enhanced ductility and high strength

(2020) Shenyou Peng et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

Critical microstructures and defects in heterostructured materials and their effects on mechanical properties

(2020) Yanfang Liu et al.   ACTA MATERIALIA

An overview of tailoring strain delocalization for strength-ductility synergy

(2020) Hao Wu et al.   PROGRESS IN MATERIALS SCIENCE

Preface to the viewpoint set on: Heterogeneous gradient and laminated materials

(2020) Lei Lu et al.   SCRIPTA MATERIALIA

Grain size effect on tensile properties and slip systems of pure magnesium

(2020) Kang Wei et al.   ACTA MATERIALIA

Revealing the strengthening and toughening mechanisms of Al-CuO composite fabricated via in-situ solid-state reaction

(2020) Xudong Rong et al.   ACTA MATERIALIA

Interface-induced strain hardening of graphene nanosheet/aluminum composites

(2019) Yuanyuan Jiang et al.   CARBON

In-situ TiB/Ti-6Al-4V composites with a tailored architecture produced by hot isostatic pressing: Microstructure evolution, enhanced tensile properties and strengthening mechanisms

(2019) Chao Cai et al.   COMPOSITES PART B-ENGINEERING

Microstructure-based modeling on structure-mechanical property relationships in carbon nanotube/aluminum composites

(2019) Run Xu et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Perspective on hetero-deformation induced (HDI) hardening and back stress

(2019) Yuntian Zhu et al.   Materials Research Letters

Extraordinary strength-ductility synergy in a heterogeneous-structured β -Ti alloy through microstructural optimization

(2019) Sumin Shin et al.   Materials Research Letters

Multiple mechanism based constitutive modeling of gradient nanograined material

(2019) Jianfeng Zhao et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Stress Localization Resulting from Grain Boundary Dislocation Interactions in Relaxed and Defective Grain Boundaries

(2019) Bryan Kuhr et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Quantitative assessment of the impact of second phase particle arrangement on damage and fracture anisotropy

(2018) F. Hannard et al.   ACTA MATERIALIA

Hierarchical microstructure design of a bimodal grained twinning-induced plasticity steel with excellent cryogenic mechanical properties

(2018) Yu Li et al.   ACTA MATERIALIA

Role of layered structure in ductility improvement of layered Ti-Al metal composite

(2018) Meng Huang et al.   ACTA MATERIALIA

The effect of precipitate-induced backstresses on plastic anisotropy: Demonstrated by modeling the behavior of aluminum alloy, 7085

(2018) J.J. Bhattacharyya et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Kinematic and isotropic strain hardening in copper with highly aligned nanoscale twins

(2018) Hao Wang et al.   Materials Research Letters

Influence of hydrogen on strain localization and fracture behavior in Al Zn Mg Cu aluminum alloys

(2018) Hang Su et al.   ACTA MATERIALIA

High-content ductile coherent nanoprecipitates achieve ultrastrong high-entropy alloys

(2018) Yao-Jian Liang et al.   Nature Communications

Mechanical and thermoelectric properties of intragranular SiC- Nanoparticle/Mg2Si composites

(2018) Ryo Inoue et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Understanding the complete loss of uniform plastic deformation of some ultrafine-grained metallic materials in tensile straining

(2018) Rainer Schwab   INTERNATIONAL JOURNAL OF PLASTICITY

Deformation behavior of brittle/ductile multilayered composites under interface constraint effect

(2017) Hao Wu et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation

(2017) Suihe Jiang et al.   NATURE

Influence of plastic strain localisation on the mechanical properties of metal matrix composites

(2017) Guohua Fan et al.   PHILOSOPHICAL MAGAZINE LETTERS

Strain hardening in Fe–16Mn–10Al–0.86C–5Ni high specific strength steel

(2016) M.X. Yang et al.   ACTA MATERIALIA

Decoupling the contributions of constituent layers to the strength and ductility of a multi-layered steel

(2016) Moo-Young Seok et al.   ACTA MATERIALIA

The orientation and strain dependence of dislocation structure evolution in monotonically deformed polycrystalline copper

(2015) Jun Jiang et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Plastic relaxation of the internal stress induced by twinning

(2013) Matthew R. Barnett et al.   ACTA MATERIALIA

Evolution of dislocation density distributions in copper during tensile deformation

(2013) J. Jiang et al.   ACTA MATERIALIA

Nanostructured high-strength molybdenum alloys with unprecedented tensile ductility

(2013) G. Liu et al.   NATURE MATERIALS

Microstructure-based modelling of isotropic and kinematic strain hardening in a precipitation-hardened aluminium alloy

(2011) G. Fribourg et al.   ACTA MATERIALIA

Orowan strengthening and forest hardening superposition examined by dislocation dynamics simulations

(2010) Sylvain Queyreau et al.   ACTA MATERIALIA

The effect of shear-resistant, plate-shaped precipitates on the work hardening of Al alloys: Towards a prediction of the strength–elongation correlation

(2009) J. da Costa Teixeira et al.   ACTA MATERIALIA