Influence of heat enhancement technique on the thermal performance of solar water heater for sustainable built environment. Start-of-the-art review

Investigating the effects of using MgO-CuO/water hybrid nanofluid in an evacuated solar water collector: A comprehensive survey

(2023) İpek Aytaç et al.   Thermal Science and Engineering Progress

Thermo-hydraulic investigation of open micro prism pin fin heat sink having varying prism sides

(2023) Prabhakar Bhandari et al.   Alexandria Engineering Journal

Experimental studies of latent heat storage based solar air heater for space heating: A comparative analysis

(2023) Abhishek Saxena et al.   Journal of Building Engineering

Optimal Insulation Assessment, Emission Analysis, and Correlation Formulation for Indian Region

(2023) Mehmet Ali Kallioğlu et al.   Buildings

Numerical investigation for augmentation of performance of solar absorber utilizing perforated tape and nanomaterial

(2022) Yahya Ali Rothan   ZAMM-Zeitschrift fur Angewandte Mathematik und Mechanik

Performance evaluation of using evacuated tubes solar collector, perforated fins, and pebbles in a solar still – experimental study and CO2 mitigation analysis

(2022) Hitesh Panchal et al.   ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH

Optimization of collector area and storage volume in domestic solar water heating systems with on–off control—A thermal energy analysis based on a pre-specified system performance

(2022) António Araújo et al.   APPLIED THERMAL ENGINEERING

Technical and economic performance study on winter heating system of air source heat pump assisted solar evacuated tube water heater

(2022) Jinping Li et al.   APPLIED THERMAL ENGINEERING

Thermo-hydraulic characterization and design optimization of delta-shaped obstacles in solar water heating system using CRITIC-COPRAS approach

(2022) Rohit Khargotra et al.   ENERGY

Intensification of nanofluid thermal performance with install of turbulator in a LFR system

(2021) Z. Ebrahimpour et al.   Chemical Engineering and Processing-Process Intensification

Thermo-hydraulic and economic performance of a parabolic trough solar collector equipped with finned rod turbulator and filled with oil-based hybrid nanofluid

(2021) Abdullah A.A.A. Al-Rashed et al.   Journal of the Taiwan Institute of Chemical Engineers

Impact of perforated shapes in delta type hindrance promoter on thermo-hydraulic performance of solar water heating system (An experimental study)

(2021) Rohit Khargotra et al.   Case Studies in Thermal Engineering

Energetic and exergetic analysis of a new double pass solar air collector with fins and phase change material

(2021) J. Assadeg et al.   SOLAR ENERGY

Influence of hindrance promoter on the thermal augmentation factor of solar water heater (an experimental study)

(2020) Rohit Khargotra et al.   RENEWABLE ENERGY

Longitudinal vortex generator applied to heat transfer enhancement of a flat plate solar water heater

(2019) Felipe A.S. da Silva et al.   APPLIED THERMAL ENGINEERING

Influence of the absorber tubes configuration on the performance of low cost solar water heating systems

(2019) Eloiny Guimarães Barbosa et al.   JOURNAL OF CLEANER PRODUCTION

Experimental and numerical investigation of heat transfer augmentation in heat sinks using perforation technique

(2019) Thamir K. Ibrahim et al.   APPLIED THERMAL ENGINEERING

Analysis of heat and fluid flow between parallel plates by inserting triangular cross-section rods in the cross-stream plane

(2019) Rahim Hassanzadeh et al.   APPLIED THERMAL ENGINEERING

Enhancing thermal conductivity of paraffin wax 53–57 °C using expanded graphite

(2019) M. Kenisarin et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Experimental evaluation of thermal performance and entropy generation inside a twisted U-tube equipped with twisted-tape inserts

(2019) A. Feizabadi et al.   INTERNATIONAL JOURNAL OF THERMAL SCIENCES

Electrodeposition of selective coatings based on black nickel for flat-plate solar water heaters

(2019) F.I. Lizama-Tzec et al.   SOLAR ENERGY

Experimental study on the performance of a novel solar water heating system with and without PCM

(2018) Wei Wu et al.   SOLAR ENERGY

Heat Transfer and Friction Characteristics of Turbulent Flow through a Circular Tube with Ball Turbulators

(2018) Wei Yuan et al.   Applied Sciences-Basel

Experimental investigation of solar water heater integrated with a nanocomposite phase change material

(2018) P. Manoj Kumar et al.   JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

An experimental evaluation of direct flow evacuated tube solar collector integrated with phase change material

(2017) Mohamed Hany Abokersh et al.   ENERGY

Numerical study of PCM integration impact on overall performances of a highly building-integrated solar collector

(2017) F. Motte et al.   RENEWABLE ENERGY

Performance assessment in V-trough solar water heater fitted with square and V-cut twisted tape inserts

(2016) A. Saravanan et al.   APPLIED THERMAL ENGINEERING

Parabolic trough solar collector for low enthalpy processes: An analysis of the efficiency enhancement by using twisted tape inserts

(2016) O.A. Jaramillo et al.   RENEWABLE ENERGY

Evacuated tube solar collectors integrated with phase change materials

(2016) Alexios Papadimitratos et al.   SOLAR ENERGY

Theoretical model of an evacuated tube heat pipe solar collector integrated with phase change material

(2015) M.S. Naghavi et al.   ENERGY

Experimental investigation of decaying swirl flow through a circular pipe for binary combination of vortex generators

(2014) Tulin Bali et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

An Experimental Study of PCM-Incorporated Thermosyphon Solar Water Heating System

(2014) G. Murali et al.   International Journal of Green Energy

Heat transfer enhancement by helical screw tape coupled with rib turbulators

(2014) Kwanchai Nanan et al.   Journal of Mechanical Science and Technology

Performance evaluation of a solar water heater integrated with a PCM nanocomposite TES at various inclinations

(2014) Hussain H. Al-Kayiem et al.   SOLAR ENERGY

Experimental studies on heat transfer and friction factor characteristics of thermosyphon solar water heating system fitted with regularly spaced twisted tape with rod and spacer

(2013) J. Ananth et al.   ENERGY CONVERSION AND MANAGEMENT

Phase change material for enhancing solar water heater, an experimental approach

(2013) Mohammad Ali Fazilati et al.   ENERGY CONVERSION AND MANAGEMENT

Enhancement of latent heat storage in a rectangular cavity: Solar water heater case study

(2013) Salwa Bouadila et al.   ENERGY CONVERSION AND MANAGEMENT

Thermal performance of an integrated collector storage solar water heater (ICSSWH) with phase change materials (PCM)

(2013) Monia Chaabane et al.   ENERGY CONVERSION AND MANAGEMENT

Thermal performance analysis of a solar water heating system with heat pipe evacuated tube collector using data from a field trial

(2013) L.M. Ayompe et al.   SOLAR ENERGY

THERMOHYDRAULICS OF LAMINAR FLOW THROUGH A CIRCULAR TUBE HAVING INTEGRAL HELICAL CORRUGATIONS AND FITTED WITH HELICAL SCREW-TAPE INSERT

(2012) Sujoy Kumar Saha   CHEMICAL ENGINEERING COMMUNICATIONS

Experimental investigation of the performance of five types of solar collectors

(2012) A. Sakhrieh et al.   ENERGY CONVERSION AND MANAGEMENT

Experimental investigation of extra-long pulsating heat pipe application in solar water heaters

(2012) M. Arab et al.   EXPERIMENTAL THERMAL AND FLUID SCIENCE

Experimental Investigation of Thermal Performance in a Tube With Detached Circular Ring Turbulators

(2012) Orhan Buyukalaca et al.   HEAT TRANSFER ENGINEERING

Heat transfer augmentation in a helical-ribbed tube with double twisted tape inserts

(2012) Pongjet Promvonge et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

Thermal and hydraulic characteristics of turbulent nanofluids flow in a rib–groove channel

(2012) H.A. Mohammed et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

Homotopy perturbation method for temperature distribution, fin efficiency and fin effectiveness of convective straight fins with temperature-dependent thermal conductivity

(2012) Erdem Cuce et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE

Preparation and thermal characteristics of CuO–oleic acid nanofluids as a phase change material

(2012) S. Harikrishnan et al.   THERMOCHIMICA ACTA

Experimental studies on heat transfer and thermal performance characteristics of thermosyphon solar water heating system with helical and Left–Right twisted tapes

(2011) S. Jaisankar et al.   ENERGY CONVERSION AND MANAGEMENT

Thermal Performance Assessment of Turbulent Tube Flow Through Wire Coil Turbulators

(2011) Smith Eiamsa-Ard et al.   HEAT TRANSFER ENGINEERING

Experimental research on heat transfer of water in tubes with conical ring inserts in transient regime

(2011) A.R. Anvari et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

Study of a solar water heater using stationary V-trough collector

(2011) K.K. Chong et al.   RENEWABLE ENERGY

Design and thermal performance of an ICS solar water heater based on three parabolic sections

(2011) O. Helal et al.   SOLAR ENERGY

High performance storage composite for the enhancement of solar domestic hot water systems

(2011) D. Haillot et al.   SOLAR ENERGY

Improvement of the thermal behaviour of gypsum blocks by the incorporation of microcapsules containing PCMS obtained by suspension polymerization with an optimal core/coating mass ratio

(2010) Ana M. Borreguero et al.   APPLIED THERMAL ENGINEERING

Evaluation of the thermal performance of frame walls enhanced with paraffin and hydrated salt phase change materials using a dynamic wall simulator

(2010) Angela C. Evers et al.   BUILDING AND ENVIRONMENT

Heat transfer and thermal storage behaviour of gypsum boards incorporating micro-encapsulated PCM

(2010) Chi-ming Lai et al.   ENERGY AND BUILDINGS

Augmentation of laminar flow and heat transfer in flat tubes by means of helical screw-tape inserts

(2010) E.Z. Ibrahim   ENERGY CONVERSION AND MANAGEMENT

Influences of peripherally-cut twisted tape insert on heat transfer and thermal performance characteristics in laminar and turbulent tube flows

(2010) Smith Eiamsa-ard et al.   EXPERIMENTAL THERMAL AND FLUID SCIENCE

Friction and heat transfer characteristics of laminar swirl flow through the round tubes inserted with alternate clockwise and counter-clockwise twisted-tapes

(2010) K. Wongcharee et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

Testing of a new solar coating for solar water heating applications

(2010) Ehab AlShamaileh   SOLAR ENERGY

All-glass vacuum tube collector heat transfer model used in forced-circulation solar water heating system

(2010) Zhiyong Li et al.   SOLAR ENERGY

Heat transfer enhancement in a tube using delta-winglet twisted tape inserts

(2009) S. Eiamsa-ard et al.   APPLIED THERMAL ENGINEERING

Experimental study of using PCM in brick constructive solutions for passive cooling

(2009) A. Castell et al.   ENERGY AND BUILDINGS

Experimental Study of PCM Inclusion in Different Building Envelopes

(2009) C. Castellón et al.   JOURNAL OF SOLAR ENERGY ENGINEERING-TRANSACTIONS OF THE ASME

Experimental investigation of natural convection heat exchange within a physical model of the manifold chamber of a thermosyphon heat-pipe evacuated tube solar water heater

(2009) David A.G. Redpath et al.   SOLAR ENERGY

Experimental studies on heat transfer and friction factor characteristics of thermosyphon solar water heater system fitted with spacer at the trailing edge of twisted tapes

(2008) S. Jaisankar et al.   APPLIED THERMAL ENGINEERING

On the heat transfer rate reduction of structural insulated panels (SIPs) outfitted with phase change materials (PCMs)

(2008) M MEDINA et al.   ENERGY

Turbulent flow and heat transfer in discrete double inclined ribs tube

(2008) Xiao-wei Li et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Experimental investigation and numerical simulation analysis on the thermal performance of a building roof incorporating phase change material (PCM) for thermal management

(2007) A. Pasupathy et al.   APPLIED THERMAL ENGINEERING

Temperature reduction due to the application of phase change materials

(2007) Conrad Voelker et al.   ENERGY AND BUILDINGS

Thermal analysis of a building brick containing phase change material

(2007) Esam M. Alawadhi   ENERGY AND BUILDINGS

Turbulent flow heat transfer and pressure loss in a double pipe heat exchanger with louvered strip inserts

(2007) Smith Eiamsa-ard et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER