Topology optimization for metal additive manufacturing: current trends, challenges, and future outlook
Published 2023 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Topology optimization for metal additive manufacturing: current trends, challenges, and future outlook
Authors
Keywords
-
Journal
Virtual and Physical Prototyping
Volume 18, Issue 1, Pages -
Publisher
Informa UK Limited
Online
2023-03-10
DOI
10.1080/17452759.2023.2181192
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Geometrical parameters and mechanical properties of Ti6Al4V hollow-walled lattices
- (2022) J. Noronha et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Assembly-level topology optimization and additive manufacturing of aluminum alloy primary mirrors
- (2022) Lei Yan et al. OPTICS EXPRESS
- Experimental investigation of a topology-optimized phase change heat sink optimized for natural convection
- (2022) Y.S. See et al. APPLIED ENERGY
- Topology optimization of the support structure for heat dissipation in additive manufacturing
- (2022) Takao Miki et al. FINITE ELEMENTS IN ANALYSIS AND DESIGN
- Study of the Mechanical Behavior of Topologically Optimized Arc Wire Direct Energy Deposition Aerospace Fixtures
- (2022) Alfredo Suárez et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Fabrication and Optimisation of Ti-6Al-4V Lattice-Structured Total Shoulder Implants Using Laser Additive Manufacturing
- (2022) Oliver Bittredge et al. Materials
- A new multi-scale topology optimization framework for optimal combinations of macro-layouts and local gradings of TPMS-based lattice structures
- (2022) Niclas Strömberg MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES
- On the use of artificial neural networks in topology optimisation
- (2022) Rebekka V. Woldseth et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- Improved Thermal Performance of a Serpentine Cooling Channel by Topology Optimization Infilled with Triply Periodic Minimal Surfaces
- (2022) Kirttayoth Yeranee et al. Energies
- TPMS-infill MMC-based topology optimization considering overlapped component property
- (2022) Sinuo Zhang et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Simultaneous optimization of hatching orientations and lattice density distribution for residual warpage reduction in laser powder bed fusion considering layerwise residual stress stacking
- (2022) Akihiro Takezawa et al. Additive Manufacturing
- Computational modelling of process–structure–property–performance relationships in metal additive manufacturing: a review
- (2021) Seyed Mahdi Hashemi et al. INTERNATIONAL MATERIALS REVIEWS
- A methodology for CT based non-destructive geometrical evaluations of lattice structures by holistic strut measurement approach
- (2021) Jitendra Singh Rathore et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Numerical modeling of mechanical properties of UAM reinforced aluminum hat sections for automotive applications
- (2021) Hyunchul Ahn et al. International Journal of Material Forming
- A Two-Scale Multi-Resolution Topologically Optimized Multi-Material Design of 3D Printed Craniofacial Bone Implants
- (2021) Jaejong Park et al. Micromachines
- Multi-Material Topology Optimization Using Neural Networks
- (2021) Aaditya Chandrasekhar et al. COMPUTER-AIDED DESIGN
- Design of graded lattice structures in turbine blades using topology optimization
- (2021) Ebrahim Ahmed Ali Alkebsi et al. INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING
- Optimization of Brake Calipers Using Topology Optimization for Additive Manufacturing
- (2021) Evangelos Tyflopoulos et al. Applied Sciences-Basel
- Topology Optimisation in Structural Steel Design for Additive Manufacturing
- (2021) Tiago P. Ribeiro et al. Applied Sciences-Basel
- Towards a comprehensive understanding of distortion in additive manufacturing based on assumption of constraining force
- (2021) Deqiao Xie et al. Virtual and Physical Prototyping
- A new level set based multi-material topology optimization method using alternating active-phase algorithm
- (2021) Wei Sha et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Additive, subtractive, and formative manufacturing of metal components: a life cycle assessment comparison
- (2021) Benjamin DeBoer et al. The International Journal of Advanced Manufacturing Technology
- Design of graded porous bone-like structures via a multi-material topology optimization approach
- (2021) Zhi Zhao et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- Concurrent high-resolution topology optimization of structures and their supports for additive manufacturing
- (2021) Eilam Amir et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- A Topology Optimization Method Based on Non-Uniform Rational Basis Spline Hyper-Surfaces for Heat Conduction Problems
- (2021) Marco Montemurro et al. Symmetry-Basel
- Geometrical Degrees of Freedom for Cellular Structures Generation: A New Classification Paradigm
- (2021) Ken M. Nsiempba et al. Applied Sciences-Basel
- Design of additive manufactured passive heat sinks for electronics
- (2021) Adriano Nicola Pilagatti et al. Journal of Manufacturing Processes
- Simulation of powder bed metal additive manufacturing microstructures with coupled finite difference-Monte Carlo method
- (2021) Theron M. Rodgers et al. Additive Manufacturing
- Effects of the Build Direction on Mechanical Performance of Laser Powder Bed Fusion Additively Manufactured Ti6Al4V under Different Loadings
- (2021) Wenbo Sun et al. ADVANCED ENGINEERING MATERIALS
- Topology Optimization of Aircraft Components for Increased Sustainability
- (2021) David J. Munk et al. AIAA JOURNAL
- Topology Optimization for Manufacturing with Accessible Support Structures
- (2021) Amir M. Mirzendehdel et al. COMPUTER-AIDED DESIGN
- Additive Manufacturing of Topology-Optimized Graded Porous Structures: An Experimental Study
- (2021) Zhi Zhao et al. JOM
- A New Uncertainty Analysis-Based Framework for Data-Driven Computational Mechanics
- (2021) Xu Guo et al. JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME
- The deal.II Library, Version 9.3
- (2021) Daniel Arndt et al. Journal of Numerical Mathematics
- Complex geometries in additive manufacturing: A new solution for lattice structure modeling and monitoring
- (2021) Bianca Maria Colosimo et al. JOURNAL OF QUALITY TECHNOLOGY
- Review on scanning pattern evaluation in laser-based additive manufacturing
- (2021) Wei-Wei Liu et al. OPTICAL ENGINEERING
- An efficient 146-line 3D sensitivity analysis code of stress-based topology optimization written in MATLAB
- (2021) Hao Deng et al. OPTIMIZATION AND ENGINEERING
- Improving mandibular reconstruction by using topology optimization, patient specific design and additive manufacturing?—A biomechanical comparison against miniplates on human specimen
- (2021) Jan J. Lang et al. PLoS One
- Multi-material topology optimization considering isotropic and anisotropic materials combination
- (2021) Rubens Bohrer et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- Topology optimization of subsonic compressible flows
- (2021) Luís F. N. Sá et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- Topology Optimization of 3D-printed joints under crash loads using Evolutionary Algorithms
- (2021) Mariusz Bujny et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- TopADD: a 2D/3D integrated topology optimization parallel-computing framework for arbitrary design domains
- (2021) Zhi-Dong Zhang et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- Reaction–diffusion equation-based topology optimization code for electromagnetic wave problems using FreeFEM++
- (2021) Mingook Jung et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- Improvement of an additively manufactured subperiosteal implant structure design by finite elements based topological optimization
- (2021) Alberto Carnicero et al. Scientific Reports
- Temperature Distribution Design Based on Variable Lattice Density Optimization and Metal Additive Manufacturing
- (2021) Akira Ueno et al. Symmetry-Basel
- Comprehensive View of Topological Optimization Scooter Frame Design and Manufacturing
- (2021) Jakub Mesicek et al. Symmetry-Basel
- Topology Optimization Design and Experimental Research of a 3D-Printed Metal Aerospace Bracket Considering Fatigue Performance
- (2021) Yisheng Chen et al. Applied Sciences-Basel
- Residual stress modeling considering microstructure evolution in metal additive manufacturing
- (2021) Elham Mirkoohi et al. Journal of Manufacturing Processes
- IbIPP for topology optimization—An Image-based Initialization and Post-Processing code written in MATLAB
- (2021) Osezua Ibhadode et al. SoftwareX
- Review on additive hybrid- and multi-material-manufacturing of metals by powder bed fusion: state of technology and development potential
- (2021) M. Schneck et al. Progress in Additive Manufacturing
- Three-dimensional topology optimization of a fluid–structure system using body-fitted mesh adaption based on the level-set method
- (2021) Hao Li et al. APPLIED MATHEMATICAL MODELLING
- Residual stress constrained self-support topology optimization for metal additive manufacturing
- (2021) Shuzhi Xu et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Topology Optimization for additive manufacturing with distortion constraints
- (2021) Grzegorz Misiun et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Self-supporting structure design with feature-driven optimization approach for additive manufacturing
- (2021) Lu Zhou et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Efficient Representation and Optimization of TPMS-Based Porous Structures for 3D Heat Dissipation
- (2021) Shengfa Wang et al. COMPUTER-AIDED DESIGN
- An experimental investigation of a PCM-based heat sink enhanced with a topology-optimized tree-like structure
- (2021) J.Y. Ho et al. ENERGY CONVERSION AND MANAGEMENT
- Full-scale 3D structural topology optimization using adaptive mesh refinement based on the level-set method
- (2021) Hao Li et al. FINITE ELEMENTS IN ANALYSIS AND DESIGN
- Topology optimization considering the distortion in additive manufacturing
- (2021) Takao Miki et al. FINITE ELEMENTS IN ANALYSIS AND DESIGN
- A robust solver for elliptic PDEs in 3D complex geometries
- (2021) Matthew J. Morse et al. JOURNAL OF COMPUTATIONAL PHYSICS
- A comprehensive review of educational articles on structural and multidisciplinary optimization
- (2021) Chao Wang et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- Integrated design framework of 3D printed planar stainless tubular joint: Modelling, optimization, manufacturing, and experiment
- (2021) Senbin Huang et al. THIN-WALLED STRUCTURES
- Assessment of Computer-Aided Design Tools for Topology Optimization of Additively Manufactured Automotive Components
- (2021) Enrico Dalpadulo et al. Applied Sciences-Basel
- Transition boundaries and stiffness optimal design for multi-TPMS lattices
- (2021) Fangxi Ren et al. MATERIALS & DESIGN
- Metal additive manufacturing in aerospace: A review
- (2021) Byron Blakey-Milner et al. MATERIALS & DESIGN
- Optimally variable density lattice to reduce warping thermal distortion of laser powder bed fusion
- (2021) Akihiro Takezawa et al. Additive Manufacturing
- A review of multi-scale and multi-physics simulations of metal additive manufacturing processes with focus on modeling strategies
- (2021) Mohamad Bayat et al. Additive Manufacturing
- Island scanning pattern optimization for residual deformation mitigation in laser powder bed fusion via sequential inherent strain method and sensitivity analysis
- (2021) Qian Chen et al. Additive Manufacturing
- FullControl GCode Designer: Open-source software for unconstrained design in additive manufacturing
- (2021) Andrew Gleadall Additive Manufacturing
- Biomechanical investigation of a novel hybrid dorsal double plating for distal radius fractures by integrating topology optimization and finite element analysis
- (2020) Medical Doctor Hsuan Chih Liu et al. INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED
- Analytical modeling of residual stress in direct metal deposition considering scan strategy
- (2020) Elham Mirkoohi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A second-order measure of boundary oscillations for overhang control in topology optimization
- (2020) Francesco Mezzadri et al. JOURNAL OF COMPUTATIONAL PHYSICS
- Topology optimization of 3D-printed structurally porous cage for acetabular reinforcement in total hip arthroplasty
- (2020) Ahmed Moussa et al. Journal of the Mechanical Behavior of Biomedical Materials
- Design of a patient-specific mandible reconstruction implant with dental prosthesis for metal 3D printing using integrated weighted topology optimization and finite element analysis
- (2020) Chia-Hsuan Li et al. Journal of the Mechanical Behavior of Biomedical Materials
- FreeFEM++ code for reaction-diffusion equation–based topology optimization: for high-resolution boundary representation using adaptive mesh refinement
- (2020) Cheolwoong Kim et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- Thermo-mechanical modeling of thermal stress in metal additive manufacturing considering elastoplastic hardening
- (2020) Elham Mirkoohi et al. CIRP Journal of Manufacturing Science and Technology
- Multi-material topology optimization of lattice structures using geometry projection
- (2020) Hesaneh Kazemi et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Modeling of the laser powder–based directed energy deposition process for additive manufacturing: a review
- (2020) Xiaoyi Guan et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Biomimetic design and laser additive manufacturing—A perfect symbiosis?
- (2020) Melanie Gralow et al. JOURNAL OF LASER APPLICATIONS
- Self-Support Topology Optimization with Horizontal Overhangs for Additive Manufacturing
- (2020) Jikai Liu et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Additive manufacturing and topology optimization: A design strategy for a steering column mounting bracket considering overhang constraints
- (2020) Sara Mantovani et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
- Multi-physics continuum modelling approaches for metal powder additive manufacturing: a review
- (2020) Shekhar Srivastava et al. RAPID PROTOTYPING JOURNAL
- Topology optimization of support structure layout in metal-based additive manufacturing accounting for thermal deformations
- (2020) Jeroen Pellens et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- Support optimization in additive manufacturing for geometric and thermo-mechanical constraints
- (2020) Grégoire Allaire et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- A MATLAB code for topology optimization using the geometry projection method
- (2020) Hollis Smith et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- Topology optimization parallel-computing framework based on the inherent strain method for support structure design in laser powder-bed fusion additive manufacturing
- (2020) Zhi-Dong Zhang et al. International Journal of Mechanics and Materials in Design
- Three-dimensional high resolution topology optimization considering additive manufacturing constraints
- (2020) Kaiqing Zhang et al. Additive Manufacturing
- Imposing minimum and maximum member size, minimum cavity size, and minimum separation distance between solid members in topology optimization
- (2020) Eduardo Fernández et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- MFEM: A modular finite element methods library
- (2020) Robert Anderson et al. COMPUTERS & MATHEMATICS WITH APPLICATIONS
- The Dune framework: Basic concepts and recent developments
- (2020) Peter Bastian et al. COMPUTERS & MATHEMATICS WITH APPLICATIONS
- Eigen-frequencies and harmonic responses in topology optimisation: A CAD-compatible algorithm
- (2020) Giulio Costa et al. ENGINEERING STRUCTURES
- Manufacturability analysis of metal laser-based powder bed fusion additive manufacturing—a survey
- (2020) Ying Zhang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A Review of Methods for the Geometric Post-Processing of Topology Optimized Models
- (2020) Subodh C. Subedi et al. JOURNAL OF COMPUTING AND INFORMATION SCIENCE IN ENGINEERING
- Potential and challenges of additive manufacturing for topology optimized spacecraft structures
- (2020) Robin Willner et al. JOURNAL OF LASER APPLICATIONS
- Porous fusion cage design via integrated global-local topology optimization and biomechanical analysis of performance
- (2020) Hongwei Wang et al. Journal of the Mechanical Behavior of Biomedical Materials
- Additive manufacturing and non-destructive testing of topology-optimised aluminium components
- (2020) Sascha Senck et al. Nondestructive Testing and Evaluation
- Mechanistic models for additive manufacturing of metallic components
- (2020) H.L. Wei et al. PROGRESS IN MATERIALS SCIENCE
- Additive manufacturing scanning paths optimization using shape optimization tools
- (2020) M. Boissier et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- A review on feature-mapping methods for structural optimization
- (2020) Fabian Wein et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- A novel application framework for self-supporting topology optimization
- (2020) Dengyang Zhao et al. VISUAL COMPUTER
- Comprehensive View on Racing Car Upright Design and Manufacturing
- (2020) Marek Hunar et al. Symmetry-Basel
- Toptimiz3D: A topology optimization software using unstructured meshes
- (2020) Ernesto Aranda et al. ADVANCES IN ENGINEERING SOFTWARE
- 3D topology optimization of heat sinks for liquid cooling
- (2020) Sicheng Sun et al. APPLIED THERMAL ENGINEERING
- A review of topology optimization for additive manufacturing: Status and challenges
- (2020) Jihong ZHU et al. Chinese Journal of Aeronautics
- PPINN: Parareal physics-informed neural network for time-dependent PDEs
- (2020) Xuhui Meng et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Sensitivity analysis and lattice density optimization for sequential inherent strain method used in additive manufacturing process
- (2020) Akihiro Takezawa et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Overhang control based on front propagation in 3D topology optimization for additive manufacturing
- (2020) Emiel van de Ven et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Topology optimization of 2D structures with nonlinearities using deep learning
- (2020) Diab W. Abueidda et al. COMPUTERS & STRUCTURES
- Data-Driven Additive Manufacturing Constraints for Topology Optimization
- (2020) Benjamin M. Weiss et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Modeling and Simulation of Microstructure Evolution for Additive Manufacturing of Metals: A Critical Review
- (2020) Carolin Körner et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Review on residual stress in selective laser melting additive manufacturing of alloy parts
- (2020) Ze-Chen Fang et al. OPTICS AND LASER TECHNOLOGY
- Nature-inspired optimization of tubular joints for metal 3D printing
- (2020) Alper Kanyilmaz et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- An 89-line code for geometrically nonlinear topology optimization written in FreeFEM
- (2020) Benliang Zhu et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- Metallurgy, mechanistic models and machine learning in metal printing
- (2020) T. DebRoy et al. Nature Reviews Materials
- Scan-by-Scan Part-Scale Thermal Modelling for Defect Prediction in Metal Additive Manufacturing
- (2020) T.P. Moran et al. Additive Manufacturing
- Additive manufacturing oriented topology optimization of structures with self-supported enclosed voids
- (2020) Yunfeng Luo et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- An all-movable rudder designed by thermo-elastic topology optimization and manufactured by additive manufacturing
- (2020) Longlong Song et al. COMPUTERS & STRUCTURES
- Topology optimization of two fluid heat exchangers
- (2020) Lukas Christian Høghøj et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Investigation of significant factors on deformation with powder bed fusion system
- (2020) Tan Pan et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Shape Accuracy and Surface Quality of Additively Manufactured, Optimized, Patient-Specific Bone Plates
- (2020) Michael Seebach et al. Journal of Medical Devices-Transactions of the ASME
- Topology optimization of 3D continuum structures under geometric self-supporting constraint
- (2020) Minghao Bi et al. Additive Manufacturing
- Modeling and experimental validation of an immersed thermo-mechanical part-scale analysis for laser powder bed fusion processes
- (2020) Massimo Carraturo et al. Additive Manufacturing
- Topology optimization of self-supporting structures for additive manufacturing with B-spline parameterization
- (2020) Che Wang et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Efficient Representation and Optimization for TPMS-Based Porous Structures
- (2020) Jiangbei Hu et al. IEEE TRANSACTIONS ON VISUALIZATION AND COMPUTER GRAPHICS
- Topology optimization based on a two-dimensional swirl flow model of Tesla-type pump devices
- (2019) Diego Hayashi Alonso et al. COMPUTERS & MATHEMATICS WITH APPLICATIONS
- OpenMDAO: an open-source framework for multidisciplinary design, analysis, and optimization
- (2019) Justin S. Gray et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- Topology optimization method with elimination of enclosed voids
- (2019) Lu Zhou et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- Penalty regulation of overhang in topology optimization for additive manufacturing
- (2019) C.-J. Thore et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- Multicomponent Topology Optimization for Additive Manufacturing With Build Volume and Cavity Free Constraints
- (2019) Yuqing Zhou et al. JOURNAL OF COMPUTING AND INFORMATION SCIENCE IN ENGINEERING
- Topology optimization of fixed complete denture framework
- (2019) Jaejong Park et al. International Journal for Numerical Methods in Biomedical Engineering
- From Topology Optimization Design to Additive Manufacturing: Today’s Success and Tomorrow’s Roadmap
- (2019) Liang Meng et al. ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING
- Maximum length scale requirement in a topology optimisation method based on NURBS hyper-surfaces
- (2019) Giulio Costa et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Overhang constraint for topology optimization of self-supported compliant mechanisms considering additive manufacturing
- (2019) Alain Garaigordobil et al. COMPUTER-AIDED DESIGN
- Novel approach to optimized support structures in laser beam melting by combining process simulation with topology optimization
- (2019) Katharina Bartsch et al. JOURNAL OF LASER APPLICATIONS
- NURBS hyper-surfaces for 3D topology optimization problems
- (2019) Giulio Costa et al. MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
- Self-supporting structure design for additive manufacturing by using a logistic aggregate function
- (2019) Yu-Hsin Kuo et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- On the benefits of applying topology optimization to structural design of aircraft components
- (2019) David J. Munk et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- Topology optimised metallic bone plates produced by electron beam melting: a mechanical and biological study
- (2019) Abdulsalam Abdulaziz Al-Tamimi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Additive Manufacturing of Horizontal and 3D Functionally Graded 316L/Cu10Sn Components via Multiple Material Selective Laser Melting
- (2019) Chao Wei et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Machine Learning to Aid Tuning of Numerical Parameters in Topology Optimization
- (2019) Matthew E. Lynch et al. JOURNAL OF MECHANICAL DESIGN
- A general multi-objective topology optimization methodology developed for customized design of pelvic prostheses
- (2019) Taimoor Iqbal et al. MEDICAL ENGINEERING & PHYSICS
- An aggregation strategy of maximum size constraints in density-based topology optimization
- (2019) Eduardo Fernández et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- Design against distortion for additive manufacturing
- (2019) Anas Yaghi et al. Additive Manufacturing
- Beautiful and Functional: A Review of Biomimetic Design in Additive Manufacturing
- (2019) Anton du Plessis et al. Additive Manufacturing
- On utilizing topology optimization to design support structure to prevent residual stress induced build failure in laser powder bed metal additive manufacturing
- (2019) Lin Cheng et al. Additive Manufacturing
- Topology optimization of thermal conductive support structures for laser additive manufacturing
- (2019) Mingdong Zhou et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Part-scale build orientation optimization for minimizing residual stress and support volume for metal additive manufacturing: Theory and experimental validation
- (2019) Lin Cheng et al. COMPUTER-AIDED DESIGN
- New improvement opportunities through applying topology optimization combined with 3D printing to the construction of gearbox housings
- (2019) P. Barreiro et al. FORSCHUNG IM INGENIEURWESEN-ENGINEERING RESEARCH
- Shape and Performance Controlled Advanced Design for Additive Manufacturing (ADfAM): A Review of Slicing and Path Planning
- (2019) Donghua Zhao et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Controlling mechanical properties of additively manufactured hastelloy X by altering solidification pattern during laser powder-bed fusion
- (2019) Ali Keshavarzkermani et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Topologically optimized axle carrier for Formula Student produced by selective laser melting
- (2019) Ondřej Vaverka et al. RAPID PROTOTYPING JOURNAL
- Neural networks for topology optimization
- (2019) Ivan Sosnovik et al. RUSSIAN JOURNAL OF NUMERICAL ANALYSIS AND MATHEMATICAL MODELLING
- A study on practical objectives and constraints for heat conduction topology optimization
- (2019) Danny J. Lohan et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- Analytical modeling of 3D temperature distribution in selective laser melting of Ti-6Al-4V considering part boundary conditions
- (2019) Jinqiang Ning et al. Journal of Manufacturing Processes
- Automated metrology and geometric analysis of additively manufactured lattice structures
- (2019) Davis J. McGregor et al. Additive Manufacturing
- Method to optimize an additively-manufactured functionally-graded lattice structure for effective liquid cooling
- (2019) Akihiro Takezawa et al. Additive Manufacturing
- Optimization and Re-Design of a Metallic Riveting Tool for Selective Laser Melting – A Case Study
- (2019) Patrick Weis et al. Additive Manufacturing
- Review on Computational Modeling of Process–Microstructure–Property Relationships in Metal Additive Manufacturing
- (2019) Theofilos Gatsos et al. JOM
- Metal additive manufacturing in the commercial aviation industry: A review
- (2019) Annamaria Gisario et al. JOURNAL OF MANUFACTURING SYSTEMS
- Space-time topology optimization for additive manufacturing
- (2019) Weiming Wang et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- A dual mesh method with adaptivity for stress-constrained topology optimization
- (2019) Daniel A. White et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- Effects of defects on mechanical properties in metal additive manufacturing: A review focusing on X-ray tomography insights
- (2019) Anton du Plessis et al. MATERIALS & DESIGN
- Microstructure modelling for metallic additive manufacturing: a review
- (2019) Joel Heang Kuan Tan et al. Virtual and Physical Prototyping
- Rapid prediction of real-time thermal characteristics, solidification parameters and microstructure in laser directed energy deposition (powder-fed additive manufacturing)
- (2019) Yuze Huang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- A numerical investigation of support structure designs for overhangs in powder bed electron beam additive manufacturing
- (2019) Bo Cheng et al. Journal of Manufacturing Processes
- Mechanical and thermal characterisation of AlSi10Mg SLM block support structures
- (2019) Martin Leary et al. MATERIALS & DESIGN
- Review on design and structural optimisation in additive manufacturing: Towards next-generation lightweight structures
- (2019) János Plocher et al. MATERIALS & DESIGN
- A computationally efficient thermal model for selective laser melting
- (2019) Y. Yang et al. Additive Manufacturing
- Solidification microstructure simulation of Ti-6Al-4V in metal additive manufacturing: A review
- (2019) Jinghao Li et al. Additive Manufacturing
- Simulation of melt pool behaviour during additive manufacturing: Underlying physics and progress
- (2019) Peter S. Cook et al. Additive Manufacturing
- A new approach to eliminating enclosed voids in topology optimization for additive manufacturing
- (2019) Yulin Xiong et al. Additive Manufacturing
- Experimental validation of additively manufactured optimized shapes for passive cooling
- (2018) Boyan S. Lazarov et al. APPLIED ENERGY
- Topology optimization of self-supporting structures with polygon features for additive manufacturing
- (2018) Weihong Zhang et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Level set-based topology optimization with overhang constraint: Towards support-free additive manufacturing
- (2018) Yaguang Wang et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Design of complex bone internal structure using topology optimization with perimeter control
- (2018) Jaejong Park et al. COMPUTERS IN BIOLOGY AND MEDICINE
- Generative Adversarial Networks: An Overview
- (2018) Antonia Creswell et al. IEEE SIGNAL PROCESSING MAGAZINE
- Infill Optimization for Additive Manufacturing—Approaching Bone-Like Porous Structures
- (2018) Jun Wu et al. IEEE TRANSACTIONS ON VISUALIZATION AND COMPUTER GRAPHICS
- A reduction of protector cover warpage via topology optimization
- (2018) Saiful Bahri Mohd Yasin et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Design of passive coolers for light-emitting diode lamps using topology optimisation
- (2018) Joe Alexandersen et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Semi-analytical solutions for the transient temperature fields induced by a moving heat source in an orthogonal domain
- (2018) T.F. Flint et al. INTERNATIONAL JOURNAL OF THERMAL SCIENCES
- Additive Manufacturing Constraints in Topology Optimization for Improved Manufacturability
- (2018) Kunal Mhapsekar et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- DESIGN OF A MAXILLOFACIAL PROSTHESIS BASED ON TOPOLOGY OPTIMIZATION
- (2018) NING DAI et al. Journal of Mechanics in Medicine and Biology
- Effect of adding support structures for overhanging part on fatigue strength in selective laser melting
- (2018) Yuka Kajima et al. Journal of the Mechanical Behavior of Biomedical Materials
- Taking into Account Thermal Residual Stresses in Topology Optimization of Structures Built by Additive Manufacturing
- (2018) Gregoire Allaire et al. MATHEMATICAL MODELS & METHODS IN APPLIED SCIENCES
- Finite element analysis and design of an interspinous device using topology optimization
- (2018) Li-Xin Guo et al. MEDICAL & BIOLOGICAL ENGINEERING & COMPUTING
- Additive manufacturing of metallic components – Process, structure and properties
- (2018) T. DebRoy et al. PROGRESS IN MATERIALS SCIENCE
- Structural optimization design for antenna bracket manufactured by selective laser melting
- (2018) Zefeng Xiao et al. RAPID PROTOTYPING JOURNAL
- Current and future trends in topology optimization for additive manufacturing
- (2018) Jikai Liu et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- Toplogical optimization of structures using Fourier representations
- (2018) Daniel A. White et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- Continuous front propagation-based overhang control for topology optimization with additive manufacturing
- (2018) Emiel van de Ven et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- A level set-based structural optimization code using FEniCS
- (2018) Antoine Laurain STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- A new overhang constraint for topology optimization of self-supporting structures in additive manufacturing
- (2018) Alain Garaigordobil et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- Combined optimization of part topology, support structure layout and build orientation for additive manufacturing
- (2018) Matthijs Langelaar STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review
- (2018) Y. Kok et al. MATERIALS & DESIGN
- A critical review of powder-based additive manufacturing of ferrous alloys: Process parameters, microstructure and mechanical properties
- (2018) Haniyeh Fayazfar et al. MATERIALS & DESIGN
- Machine Learning Driven Real Time Topology Optimization under Moving Morphable Component (MMC)-Based Framework
- (2018) Xin Lei et al. JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME
- Projection-based two-phase minimum and maximum length scale control in topology optimization
- (2018) Josephine V. Carstensen et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- Design & Manufacture of a High-Performance Bicycle Crank by Additive Manufacturing
- (2018) Iain McEwen et al. Applied Sciences-Basel
- Validation of Mechanical Layer Equivalent Method for simulation of residual stresses in additive manufactured components
- (2018) Marvin Siewert et al. COMPUTERS & MATHEMATICS WITH APPLICATIONS
- Topology optimization of bone using cubic material design and evolutionary methods based on internal remodeling
- (2018) Ibrahim Goda et al. MECHANICS RESEARCH COMMUNICATIONS
- 3-Dimensional heat transfer modeling for laser powder-bed fusion additive manufacturing with volumetric heat sources based on varied thermal conductivity and absorptivity
- (2018) Zhidong Zhang et al. OPTICS AND LASER TECHNOLOGY
- A new physics-based model for laser directed energy deposition (powder-fed additive manufacturing): From single-track to multi-track and multi-layer
- (2018) Yuze Huang et al. OPTICS AND LASER TECHNOLOGY
- Integrated component-support topology optimization for additive manufacturing with post-machining
- (2018) Matthijs Langelaar RAPID PROTOTYPING JOURNAL
- A review of computational modeling in powder-based additive manufacturing for metallic part qualification
- (2018) Jingfu Liu et al. RAPID PROTOTYPING JOURNAL
- A personalized mandibular implant with supporting and porous structures designed with topology optimization – a case study of canine
- (2018) Kangjie Cheng et al. RAPID PROTOTYPING JOURNAL
- Optimizing supports for additive manufacturing
- (2018) Grégoire Allaire et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- Deep learning for determining a near-optimal topological design without any iteration
- (2018) Yonggyun Yu et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- Combined length scale and overhang angle control in minimum compliance topology optimization for additive manufacturing
- (2018) Jeroen Pellens et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- Assumption of Constraining Force to Explain Distortion in Laser Additive Manufacturing
- (2018) Deqiao Xie et al. Materials
- Manufacturability of AlSi10Mg overhang structures fabricated by laser powder bed fusion
- (2018) Quanquan Han et al. MATERIALS & DESIGN
- Topology optimization considering overhang constraint in additive manufacturing
- (2018) Kaiqing Zhang et al. COMPUTERS & STRUCTURES
- Stress-constrained topology optimization considering uniform manufacturing uncertainties
- (2018) Gustavo Assis da Silva et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Undercut and overhang angle control in topology optimization: A density gradient based integral approach
- (2017) Xiaoping Qian INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
- Numerical methods for fractional partial differential equations
- (2017) Changpin Li et al. INTERNATIONAL JOURNAL OF COMPUTER MATHEMATICS
- Design Optimization Method for Additive Manufacturing of the Primary Mirror of a Large-Aperture Space Telescope
- (2017) Rui Hu et al. JOURNAL OF AEROSPACE ENGINEERING
- Structural optimization under overhang constraints imposed by additive manufacturing technologies
- (2017) G. Allaire et al. JOURNAL OF COMPUTATIONAL PHYSICS
- An Open Source Framework for Integrated Additive Manufacturing and Level-Set-Based Topology Optimization
- (2017) Panagiotis Vogiatzis et al. JOURNAL OF COMPUTING AND INFORMATION SCIENCE IN ENGINEERING
- Designing for Additive Manufacturing: Lightweighting Through Topology Optimization Enables Lunar Spacecraft
- (2017) Melissa E. Orme et al. JOURNAL OF MECHANICAL DESIGN
- Efficient design optimization of variable-density cellular structures for additive manufacturing: theory and experimental validation
- (2017) Lin Cheng et al. RAPID PROTOTYPING JOURNAL
- Optimisation of functionally graded lattice structures using isostatic lines
- (2017) Stephen Daynes et al. MATERIALS & DESIGN
- Topology optimization with manufacturing constraints: A unified projection-based approach
- (2016) Sandro L. Vatanabe et al. ADVANCES IN ENGINEERING SOFTWARE
- Multiscale Modeling of Powder Bed–Based Additive Manufacturing
- (2016) Matthias Markl et al. Annual Review of Materials Research
- Metal Additive Manufacturing: A Review of Mechanical Properties
- (2016) John J. Lewandowski et al. Annual Review of Materials Research
- Bi-directional Evolutionary Structural Optimization on Advanced Structures and Materials: A Comprehensive Review
- (2016) Liang Xia et al. ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING
- Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review
- (2016) Xiaojian Wang et al. BIOMATERIALS
- Feature-driven topology optimization method with signed distance function
- (2016) Ying Zhou et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Minimum length scale control in structural topology optimization based on the Moving Morphable Components (MMC) approach
- (2016) Weisheng Zhang et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Support structure constrained topology optimization for additive manufacturing
- (2016) Amir M. Mirzendehdel et al. COMPUTER-AIDED DESIGN
- preCICE – A fully parallel library for multi-physics surface coupling
- (2016) Hans-Joachim Bungartz et al. COMPUTERS & FLUIDS
- A lightweight and support-free design method for selective laser melting
- (2016) Zhonghua Li et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Large scale three-dimensional topology optimisation of heat sinks cooled by natural convection
- (2016) Joe Alexandersen et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- A framework to reduce product environmental impact through design optimization for additive manufacturing
- (2016) Yunlong Tang et al. JOURNAL OF CLEANER PRODUCTION
- A multiscale modeling approach for fast prediction of part distortion in selective laser melting
- (2016) C. Li et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Surface texture metrology for metal additive manufacturing: a review
- (2016) A. Townsend et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Simulation of metallic powder bed additive manufacturing processes with the finite element method: A critical review
- (2016) Babis Schoinochoritis et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Structural topology optimization considering connectivity constraint
- (2016) Quhao Li et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- Application of layout optimization to the design of additively manufactured metallic components
- (2016) Christopher J. Smith et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- Topology optimization considering overhang constraints: Eliminating sacrificial support material in additive manufacturing through design
- (2016) Andrew T. Gaynor et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- An additive manufacturing filter for topology optimization of print-ready designs
- (2016) Matthijs Langelaar STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- Direct metal additive manufacturing processes and their sustainable applications for green technology: A review
- (2016) Dong-Gyu Ahn International Journal of Precision Engineering and Manufacturing-Green Technology
- Standardized Loads Acting in Hip Implants
- (2016) Georg Bergmann et al. PLoS One
- Perceptual models of preference in 3D printing direction
- (2015) Xiaoting Zhang et al. ACM TRANSACTIONS ON GRAPHICS
- TetGen, a Delaunay-Based Quality Tetrahedral Mesh Generator
- (2015) Hang Si ACM TRANSACTIONS ON MATHEMATICAL SOFTWARE
- Minimum length scale in topology optimization by geometric constraints
- (2015) Mingdong Zhou et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Bidirectional Evolutionary Structural Optimization (BESO) based design method for lattice structure to be fabricated by additive manufacturing
- (2015) Yunlong Tang et al. COMPUTER-AIDED DESIGN
- Support slimming for single material based additive manufacturing
- (2015) Kailun Hu et al. COMPUTER-AIDED DESIGN
- The status, challenges, and future of additive manufacturing in engineering
- (2015) Wei Gao et al. COMPUTER-AIDED DESIGN
- Additive manufacturing methods and modelling approaches: a critical review
- (2015) H. Bikas et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Build orientation optimization for multi-part production in additive manufacturing
- (2015) Yicha Zhang et al. JOURNAL OF INTELLIGENT MANUFACTURING
- Topological optimization of internal patterns and support in additive manufacturing
- (2015) Nicolas Gardan et al. JOURNAL OF MANUFACTURING SYSTEMS
- Topology Optimization of Total Femur Structure: Application of Parameterized Level Set Method Under Geometric Constraints
- (2015) Xiaowei Deng et al. JOURNAL OF MECHANICAL DESIGN
- Topology Optimization, Additive Layer Manufacturing, and Experimental Testing of an Air-Cooled Heat Sink
- (2015) Ercan M. Dede et al. JOURNAL OF MECHANICAL DESIGN
- Designing patient-specific 3D printed craniofacial implants using a novel topology optimization method
- (2015) Alok Sutradhar et al. MEDICAL & BIOLOGICAL ENGINEERING & COMPUTING
- Bridging topology optimization and additive manufacturing
- (2015) Tomás Zegard et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- Stress-based design of thermal structures via topology optimization
- (2015) Joshua D. Deaton et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- A new topology optimization approach based on Moving Morphable Components (MMC) and the ersatz material model
- (2015) Weisheng Zhang et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- Review of selective laser melting: Materials and applications
- (2015) C. Y. Yap et al. Applied Physics Reviews
- Design of truss-like cellular structures using relative density mapping method
- (2015) Mahmoud Alzahrani et al. MATERIALS & DESIGN
- An explicit length scale control approach in SIMP-based topology optimization
- (2014) Weisheng Zhang et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Additive Manufacturing: Making Imagination the Major Limitation
- (2014) Yuwei Zhai et al. JOM
- Efficient Design-Optimization of Variable-Density Hexagonal Cellular Structure by Additive Manufacturing: Theory and Validation
- (2014) Pu Zhang et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Metal Additive Manufacturing: A Review
- (2014) William E. Frazier JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Design optimization of supports for overhanging structures in aluminum and titanium alloys by selective laser melting
- (2014) F. Calignano MATERIALS & DESIGN
- Optimal topology for additive manufacture: A method for enabling additive manufacture of support-free optimal structures
- (2014) Martin Leary et al. MATERIALS & DESIGN
- Overview of modelling and simulation of metal powder bed fusion process at Lawrence Livermore National Laboratory
- (2014) W. King et al. MATERIALS SCIENCE AND TECHNOLOGY
- Residual stress via the contour method in compact tension specimens produced via selective laser melting
- (2014) Bey Vrancken et al. SCRIPTA MATERIALIA
- Topology optimization using PETSc: An easy-to-use, fully parallel, open source topology optimization framework
- (2014) Niels Aage et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- Prediction of stress shielding around an orthopedic screw: Using stress and strain energy density as mechanical stimuli
- (2013) Kristina Haase et al. COMPUTERS IN BIOLOGY AND MEDICINE
- Advanced lattice support structures for metal additive manufacturing
- (2013) Ahmed Hussein et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Bone tissue engineering using 3D printing
- (2013) Susmita Bose et al. Materials Today
- Level-set methods for structural topology optimization: a review
- (2013) N. P. van Dijk et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- Design of self-supporting surfaces
- (2012) Etienne Vouga et al. ACM TRANSACTIONS ON GRAPHICS
- A new approach to the design and optimisation of support structures in additive manufacturing
- (2012) G. Strano et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Laser additive manufacturing of metallic components: materials, processes and mechanisms
- (2012) D D Gu et al. INTERNATIONAL MATERIALS REVIEWS
- Multiscale Design and Multiobjective Optimization of Orthopedic Hip Implants with Functionally Graded Cellular Material
- (2012) Sajad Arabnejad Khanoki et al. JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME
- A paradigm for the development and evaluation of novel implant topologies for bone fixation: Implant design and fabrication
- (2012) Heesuk Kang et al. JOURNAL OF BIOMECHANICS
- PolyTop: a Matlab implementation of a general topology optimization framework using unstructured polygonal finite element meshes
- (2012) Cameron Talischi et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- Design of Auxetic Structures via Mathematical Optimization
- (2011) J. Schwerdtfeger et al. ADVANCED MATERIALS
- Topological optimization for designing patient-specific large craniofacial segmental bone replacements
- (2010) A. Sutradhar et al. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
- Efficient topology optimization in MATLAB using 88 lines of code
- (2010) Erik Andreassen et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- Topological optimization in hip prosthesis design
- (2009) M. Fraldi et al. Biomechanics and Modeling in Mechanobiology
- Topology optimization with multiple phase projection
- (2009) James K. Guest COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Gmsh: A 3-D finite element mesh generator with built-in pre- and post-processing facilities
- (2009) Christophe Geuzaine et al. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING
- Topology optimization of heat conduction problem involving design-dependent heat load effect
- (2008) T. Gao et al. FINITE ELEMENTS IN ANALYSIS AND DESIGN
- Imposing maximum length scale in topology optimization
- (2008) James K. Guest STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- A critical review of established methods of structural topology optimization
- (2008) G. I. N. Rozvany STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started