A Short Review on the Corrosion Behaviour of Wire and Arc Additive Manufactured Materials
Published 2023 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
A Short Review on the Corrosion Behaviour of Wire and Arc Additive Manufactured Materials
Authors
Keywords
-
Journal
Metals
Volume 13, Issue 4, Pages 641
Publisher
MDPI AG
Online
2023-03-24
DOI
10.3390/met13040641
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Investigation of Co-Cr-Fe-Mn-Ni Non-Equiatomic High-Entropy Alloy Fabricated by Wire Arc Additive Manufacturing
- (2022) Kirill Osintsev et al. Metals
- Investigation of the Corrosion Behavior of Wire Arc Additively Manufactured Alloy 825
- (2022) Bharat Kumar Chigilipalli et al. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS
- Corrosion behavior of cold-rolled and post heat-treated 316L stainless steel in 0.9wt% NaCl solution
- (2021) K. Bin Tayyab et al. International Journal of Minerals Metallurgy and Materials
- Microstructural and intergranular corrosion properties of Inconel 625 superalloys fabricated using wire arc additive manufacturing
- (2021) Chun Guo et al. Materials Research Express
- Geometric Specification of Non-Circular Pulleys Made with Various Additive Manufacturing Techniques
- (2021) Piotr Krawiec et al. Materials
- The Corrosion of Stainless Steel Made by Additive Manufacturing: A Review
- (2021) Gyeongbin Ko et al. Metals
- Microstructure and corrosion behaviour of wire arc additive manufactured AA2024 alloy thin wall structure
- (2021) Xinxin Zhang et al. CORROSION SCIENCE
- Wire Arc Additive Manufacturing: A Comprehensive Review and Research Directions
- (2021) Laukik P. Raut et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Post treatment of an additively manufactured composite consisting of 304L stainless steel and CoCrFeMnNi high-entropy alloy
- (2021) Y. Yang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure, Mechanical Properties, and Galvanic Corrosion of 10CrNi3MoV Fabricated by Wire Arc Additive Manufacturing
- (2021) Gen Tian et al. Metals
- Effects of process parameters on bead shape, microstructure, and mechanical properties in wire + arc additive manufacturing of Al0.1CoCrFeNi high-entropy alloy
- (2021) Md.R.U. Ahsan et al. Journal of Manufacturing Processes
- Experimental investigation of selective laser melting parameters for higher surface quality and microhardness properties: taguchi and super ranking concept approaches
- (2021) Rohith Sheshadri et al. Journal of Materials Research and Technology-JMR&T
- Effect of grain refinement induced by wire and arc additive manufacture (WAAM) on the corrosion behaviors of AZ31 magnesium alloy in NaCl solution
- (2021) Jianwei LI et al. Journal of Magnesium and Alloys
- Additive manufacturing of high performance AZ31 magnesium alloy with full equiaxed grains: Microstructure, mechanical property, and electromechanical corrosion performance
- (2021) Xuewei Fang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Analysis and Optimization of Dimensional Accuracy and Porosity of High Impact Polystyrene Material Printed by FDM Process: PSO, JAYA, Rao, and Bald Eagle Search Algorithms
- (2021) Manjunath Patel Gowdru Chandrashekarappa et al. Materials
- Experimental investigation on welding of 2.25 Cr-1.0 Mo steel with regulated metal deposition and GMAW technique incorporating metal-cored wires
- (2021) Subhash Das et al. Journal of Materials Research and Technology-JMR&T
- Optimal Design for Metal Additive Manufacturing: An Integrated Computational Materials Engineering (ICME) Approach
- (2020) S. Amir H. Motaman et al. JOM
- Effect of Ultrasonic Vibration and Interpass Temperature on Microstructure and Mechanical Properties of Cu-8Al-2Ni-2Fe-2Mn Alloy Fabricated by Wire Arc Additive Manufacturing
- (2020) Wei Chen et al. Metals
- A review of technological improvements in laser-based powder bed fusion of metal printers
- (2020) AmirMahyar Khorasani et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Control of macro-/microstructure and mechanical properties of a wire-arc additive manufactured aluminum alloy
- (2020) Thomas Klein et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Microstructure and corrosion behavior of ALD Al2O3 film on AZ31 magnesium alloy with different surface roughness
- (2020) Fumin Xu et al. Journal of Magnesium and Alloys
- Corrosion behavior of wire arc additive manufactured Inconel 718 superalloy
- (2020) L.N. Zhang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Insight into the microstructural features and corrosion properties of wire arc additive manufactured super duplex stainless steel (ER2594)
- (2020) A. Rajesh Kannan et al. MATERIALS LETTERS
- Effects of substrate temperature and deposition time on the morphology and corrosion resistance of FeCoCrNiMo0.3 high-entropy alloy coating fabricated by magnetron sputtering
- (2020) Chun-duo Dai et al. International Journal of Minerals Metallurgy and Materials
- Additive manufacturing of steels: a review of achievements and challenges
- (2020) Nima Haghdadi et al. Journal of Materials Science
- Fabrication of bulk Al-Co-Cr-Fe-Ni high-entropy alloy using combined cable wire arc additive manufacturing (CCW-AAM): microstructure and mechanical properties
- (2020) Qingkai Shen et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- High deposition wire arc additive manufacturing of mild steel: Strategies and heat input effect on microstructure and mechanical properties
- (2020) E. Aldalur et al. Journal of Manufacturing Processes
- Uncertainty quantification and composition optimization for alloy additive manufacturing through a CALPHAD-based ICME framework
- (2020) Xin Wang et al. npj Computational Materials
- Effect of titanium powder on microstructure and mechanical properties of wire + arc additively manufactured Al-Mg alloy
- (2019) Liwei Wang et al. MATERIALS LETTERS
- Effect of heat input on microstructure and mechanical properties of Al-Mg alloys fabricated by WAAM
- (2019) Chuanchu Su et al. APPLIED SURFACE SCIENCE
- Analysis of fracture toughness properties of wire + arc additive manufactured high strength low alloy structural steel components
- (2019) Philip Dirisu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of electrolyte composition on morphology and corrosion resistance of plasma electrolytic oxidation coatings on aluminized steel
- (2019) Saikiran A. et al. SURFACE & COATINGS TECHNOLOGY
- Environmental Behavior of Low Carbon Steel Produced by a Wire Arc Additive Manufacturing Process
- (2019) Ron et al. Metals
- Steels in additive manufacturing: A review of their microstructure and properties
- (2019) P. Bajaj et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Repairing surface defects of metal parts by groove machining and wire + arc based filling
- (2019) Yongzhe Li et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effects of linear heat input on microstructure and corrosion behavior of an austenitic stainless steel processed by wire arc additive manufacturing
- (2019) DongXu Wen et al. VACUUM
- Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
- (2018) Tuan D. Ngo et al. COMPOSITES PART B-ENGINEERING
- The anisotropic corrosion behaviour of wire arc additive manufactured Ti-6Al-4V alloy in 3.5% NaCl solution
- (2018) Bintao Wu et al. CORROSION SCIENCE
- Electrochemical behavior of Inconel 718 fabricated by laser solid forming on different sections
- (2018) Pengfei Guo et al. CORROSION SCIENCE
- ICME Manufacturability Assessment in Powder Bed Fusion Additive Manufacturing
- (2018) Pierre-Adrien Pires et al. JOM
- The effects of forced interpass cooling on the material properties of wire arc additively manufactured Ti6Al4V alloy
- (2018) Bintao Wu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Additive manufacturing of multi-material structures
- (2018) Amit Bandyopadhyay et al. MATERIALS SCIENCE & ENGINEERING R-REPORTS
- Effect of scanning strategies on residual stress and mechanical properties of Selective Laser Melted Ti6Al4V
- (2018) Haider Ali et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Deformation microstructures and strengthening mechanisms for the wire+arc additively manufactured Al-Mg4.5Mn alloy with inter-layer rolling
- (2018) Jianglong Gu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Thermoelectric Cooling-Aided Bead Geometry Regulation in Wire and Arc-Based Additive Manufacturing of Thin-Walled Structures
- (2018) et al. Applied Sciences-Basel
- Properties of wire + arc additively manufactured 2024 aluminum alloy with different solution treatment temperature
- (2018) Zewu Qi et al. MATERIALS LETTERS
- Formation of SUS304/Aluminum Alloys Using Wire and Arc Additive Manufacturing
- (2018) Zhizhuang Hao et al. Metals
- A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement
- (2018) Bintao Wu et al. Journal of Manufacturing Processes
- Corrosion of Additively Manufactured Alloys: A Review
- (2018) G. Sander et al. CORROSION
- Additive Manufacturing of High-Entropy Alloys: A Review
- (2018) Shuying Chen et al. Entropy
- Effect of in-process active cooling on forming quality and efficiency of tandem GMAW–based additive manufacturing
- (2018) Junbiao Shi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Corrosion resistance of welded joints of X5CrNi18-10 stainless steel
- (2018) Bore Jegdić et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Understanding and overcoming of abnormity at start and end of the weld bead in additive manufacturing with GMAW
- (2017) Zeqi Hu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Optimization of wire feed for GTAW based additive manufacturing
- (2017) Haibin Geng et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Thermal analysis for single-pass multi-layer GMAW based additive manufacturing using infrared thermography
- (2017) Dongqing Yang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructural evolution and mechanical property of Ti-6Al-4V wall deposited by continuous plasma arc additive manufacturing without post heat treatment
- (2017) Jianjun Lin et al. Journal of the Mechanical Behavior of Biomedical Materials
- Effect of CaF 2 addition on macro/microstructures and mechanical properties of wire and arc additive manufactured Ti-6Al-4V components
- (2017) Bo Yin et al. MATERIALS LETTERS
- Modelling of solid solution strengthening in multicomponent alloys
- (2017) Martin Walbrühl et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Corrosion Behavior of Additive Manufactured Ti-6Al-4V Alloy in NaCl Solution
- (2017) Jingjing Yang et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Microstructure characterization of SS308LSi components manufactured by GTAW-based additive manufacturing: shaped metal deposition using pulsed current arc
- (2016) Oguzhan Yilmaz et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Micro-Plasma Transferred Arc Additive Manufacturing for Die and Mold Surface Remanufacturing
- (2016) Suyog Jhavar et al. JOM
- Overview of Materials Qualification Needs for Metal Additive Manufacturing
- (2016) Mohsen Seifi et al. JOM
- Process improvements and characterization of ultrasonic additive manufactured structures
- (2016) P.J. Wolcott et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- The effectiveness of combining rolling deformation with Wire–Arc Additive Manufacture on β-grain refinement and texture modification in Ti–6Al–4V
- (2016) J. Donoghue et al. MATERIALS CHARACTERIZATION
- Effect of location on microstructure and mechanical properties of additive layer manufactured Inconel 625 using gas tungsten arc welding
- (2016) J.F. Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Wire Arc Additive Manufacturing of AZ31 Magnesium Alloy: Grain Refinement by Adjusting Pulse Frequency
- (2016) Jing Guo et al. Materials
- Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
- (2016) Sarah K. Everton et al. MATERIALS & DESIGN
- Additive manufacturing using plasma transferred arc
- (2015) E. A. Alberti et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Review of Mechanical Properties of Ti-6Al-4V Made by Laser-Based Additive Manufacturing Using Powder Feedstock
- (2015) Allison M. Beese et al. JOM
- The effect of location on the microstructure and mechanical properties of titanium aluminides produced by additive layer manufacturing using in-situ alloying and gas tungsten arc welding
- (2015) Yan Ma et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Fabrication of Fe-FeAl Functionally Graded Material Using the Wire-Arc Additive Manufacturing Process
- (2015) Chen Shen et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- A practical path planning methodology for wire and arc additive manufacturing of thin-walled structures
- (2015) Donghong Ding et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- Metastable beta Ti-Nb-Mo alloys with improved corrosion resistance in saline solution
- (2014) R. Chelariu et al. ELECTROCHIMICA ACTA
- Metal Additive Manufacturing: A Review
- (2014) William E. Frazier JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Development of micro-plasma transferred arc (μ-PTA) wire deposition process for additive layer manufacturing applications
- (2014) Suyog Jhavar et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Investigation of the electrochemical behaviour of TiMo alloys in simulated physiological solutions
- (2013) G. Bolat et al. ELECTROCHIMICA ACTA
- Online measurement of bead geometry in GMAW-based additive manufacturing using passive vision
- (2013) Jun Xiong et al. MEASUREMENT SCIENCE and TECHNOLOGY
- Effects of grain size on the corrosion resistance of wrought magnesium alloys containing neodymium
- (2012) G.R. Argade et al. CORROSION SCIENCE
- Additive manufacturing and its societal impact: a literature review
- (2012) Samuel H. Huang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Heat treatment of Ti6Al4V produced by Selective Laser Melting: Microstructure and mechanical properties
- (2012) Bey Vrancken et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Corrosion of hot extrusion AZ91 magnesium alloy: I-relation between the microstructure and corrosion behavior
- (2011) Tao Zhang et al. CORROSION SCIENCE
- Corrosion behaviour of AZ31 magnesium alloy with different grain sizes in simulated biological fluids☆
- (2009) M. Alvarez-Lopez et al. Acta Biomaterialia
Find the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
SearchAdd your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload Now