Optimization of Charpy‐impact strength of 3D‐printed carbon fiber/polyamide composites by Taguchi method

Calibration of the PA6 Short-Fiber Reinforced Material Model for 10% to 30% Carbon Mass Fraction Mechanical Characteristic Prediction

(2022) Evgenii Kurkin et al.   Polymers

Development and experimental analysis of polymer based composite bipolar plate using Aquila Taguchi optimization: Design of experiments

(2022) S. Raja et al.   POLYMER COMPOSITES

Polyurethane with nano‐ SiO 2 based surface sizing method for 3D printed carbon fiber reinforced nylon 6 composites

(2022) Xishuang Jing et al.   POLYMER COMPOSITES

Homogeneous distribution of lignin/graphene fillers with enhanced interlayer adhesion for 3D printing filament

(2021) Denesh Mohan et al.   POLYMER COMPOSITES

Investigation on the mechanical properties of additively manufactured PETG composites reinforced with OMMT nanoclay and carbon fibers

(2021) Vinyas Mahesh et al.   POLYMER COMPOSITES

Optimisation of Strength Properties of FDM Printed Parts—A Critical Review

(2021) Daniyar Syrlybayev et al.   Polymers

Experimental investigation on the dynamic response of additive manufactured PETG composite beams reinforced with organically modified montmorillonite nanoclay and short carbon fiber

(2021) Vinyas Mahesh   POLYMER COMPOSITES

Fused deposition modeling based polymeric materials and their performance: A review

(2021) Vigneshwaran Shanmugam et al.   POLYMER COMPOSITES

Effects of fused deposition modeling process parameters on tensile, dynamic mechanical properties of 3D printed polylactic acid materials

(2020) Shuheng Wang et al.   POLYMER TESTING

Fibre flow and void formation in 3D printing of short-fibre reinforced thermoplastic composites: An experimental benchmark exercise

(2020) Dongmin Yang et al.   Additive Manufacturing

Investigation of processing parameters on tensile performance for FDM-printed carbon fiber reinforced polyamide 6 composites

(2020) Xingshuang Peng et al.   COMPOSITES COMMUNICATIONS

Analytical study on the 3D-printed structure and mechanical properties of basalt fiber-reinforced PLA composites using X-ray microscopy

(2019) Siwon Yu et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Investigating the mechanical, morphological, and thermal behavior of PA‐6/SAN/MWCNT blends: Application of Taguchi experimental design

(2019) Ali Shabani et al.   POLYMER COMPOSITES

FDM process parameters influence over the mechanical properties of polymer specimens: A review

(2018) Diana Popescu et al.   POLYMER TESTING

Effects of hydrothermal aging on moisture absorption and property prediction of short carbon fiber reinforced polyamide 6 composites

(2018) Lin Sang et al.   COMPOSITES PART B-ENGINEERING

Stereolithography-based 3D printed photosensitive polymer/boron nitride nanoplatelets composites

(2017) Jenniffer Bustillos et al.   POLYMER COMPOSITES

Integration of graphene in poly(lactic) acid by 3D printing to develop creep and wear-resistant hierarchical nanocomposites

(2017) Jenniffer Bustillos et al.   POLYMER COMPOSITES

Thermo-oxidative ageing effect on mechanical properties and morphology of short fibre reinforced polyamide composites – comparison of carbon and glass fibres

(2017) Lin Sang et al.   RSC Advances

Mechanical characterization of 3D printed polymers for fiber reinforced polymers processing

(2017) Daniel-Alexander Türk et al.   MATERIALS & DESIGN

Additive manufacturing of PLA structures using fused deposition modelling: Effect of process parameters on mechanical properties and their optimal selection

(2017) J.M. Chacón et al.   MATERIALS & DESIGN

Additive manufacturing of carbon fiber-reinforced plastic composites using fused deposition modeling: Effects of process parameters on tensile properties

(2016) Fuda Ning et al.   JOURNAL OF COMPOSITE MATERIALS

Microcrystalline cellulose reinforced polylactic acid biocomposite filaments for 3D printing

(2016) Caroline A. Murphy et al.   POLYMER COMPOSITES

Highly oriented carbon fiber–polymer composites via additive manufacturing

(2014) Halil L. Tekinalp et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Mechanical properties of components fabricated with open-source 3-D printers under realistic environmental conditions

(2014) B.M. Tymrak et al.   MATERIALS & DESIGN

Morphology, mechanical and thermal properties of graphene-reinforced poly(butylene succinate) nanocomposites

(2011) Xin Wang et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Parametric appraisal of mechanical property of fused deposition modelling processed parts

(2009) Anoop Kumar Sood et al.   MATERIALS & DESIGN

Preparation and characterization of electrospun fibers of Nylon 11

(2008) M. Dhanalakshmi et al.   Express Polymer Letters