Preparation and properties of multiphase solid-solution strengthened high-performance W–Cu alloys through alloying with Mo, Fe and Ni

Preparation and properties of Al2O3 dispersed fine-grained W-Cu alloy

(2022) He Zhang et al.   ADVANCED POWDER TECHNOLOGY

W–Cu composites with excellent comprehensive properties

(2022) Tielong Han et al.   COMPOSITES PART B-ENGINEERING

Low-cost and low-temperature 3D printing for refractory composite inspired by fused deposition modeling and binder jetting

(2022) Longchao Zhuo et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Preparation of fine-grained Mo W solid solution alloys with excellent performances

(2022) Xin Lan et al.   MATERIALS CHARACTERIZATION

Preparation and properties of W-30 wt% Cu alloy with the additions of Ni and Fe elements

(2022) He Zhang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Densification, Microstructure Evolution, and Mechanical Properties of Low-Temperature-Sintered 90W-4.9Ni-2.1Fe-3Cu Alloy

(2021) Wentan Zhu et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Low temperature sintering of 90W–7Ni–3Fe alloy with Cu additive： microstructure evolution and mechanical properties

(2021) Wentan Zhu et al.   Journal of Materials Research and Technology-JMR&T

A novel method for preparing ultrafine molybdenum powder

(2021) He Zhang et al.   INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS

Strengthening of copper with homogeneous dispersion of nanoscale tungsten particles fabricated by spark plasma sintering

(2021) J.G. Ke et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Progress, challenges and potentials/trends of tungsten-copper (W Cu) composites/pseudo-alloys: Fabrication, regulation and application

(2021) Yanlin Wang et al.   INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS

Influence of Ni additions on the microstructure and tensile property of W-Cu composites produced by direct energy deposition

(2021) Guangyuan Wang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Preparation of Ultrafine Tungsten-Molybdenum Composite Powder and Its Sintering Behavior

(2020) He Zhang et al.   METALS AND MATERIALS INTERNATIONAL

Sintering behavior of molybdenum‑copper and tungsten‑copper alloys by using ultrafine molybdenum and tungsten powders as raw materials

(2020) He Zhang et al.   INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS

The influence of pre-sintering temperature on the microstructure and properties of infiltrated ultrafine-grained tungsten-copper composites

(2020) Yiheng Zhang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Diffusivities of Cu-Ni and Cu-Si liquids calculated via ab initio molecular dynamics and the assessment of atomic mobilities

(2020) V.B. Rajkumar et al.   JOURNAL OF MOLECULAR LIQUIDS

Insight into the Microstructure and Tensile Behavior of the W–Cu Composite Reinforced with Tungsten Fibers and Particulates

(2020) Longchao Zhuo et al.   ADVANCED ENGINEERING MATERIALS

Effect of the distribution state of transition phase on the mechanical properties and failure mechanisms of the W–Mo–Cu alloy by tuning elements content

(2020) Jin Cao et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Thermal stability and high-temperature mechanical performance of nanostructured W–Cu–Cr–ZrC composite

(2020) Lijun Cao et al.   COMPOSITES PART B-ENGINEERING

In situ synthesis of core-shell W-Cu nanopowders for fabricating full-densified and fine-grained alloys with dramatically improved performance

(2020) Xiaojing Li et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Synthesis and Characterization of Nanoscale Tungsten Particles with Hollow Superstructure Using Spray Drying Combined with Calcination Process

(2019) Panchao Zhao et al.   Nanoscale Research Letters

Novel Pathway to Prepare Mo Nanopowder via Hydrogen Reduction of MoO2 Containing Mo Nanoseeds Produced by Reducing MoO3 with Carbon Black

(2019) Guo-Dong Sun et al.   JOM

Effect of processing route on densification of W-10 wt% Cu nanocomposite using spark plasma sintering

(2019) S.S. Kalyan Kamal et al.   JOURNAL OF ALLOYS AND COMPOUNDS

W–Cu composites with homogenous Cu–network structure prepared by spark plasma sintering using core–shell powders

(2019) Nan Deng et al.   INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS

W–Cu composites with submicron- and nanostructures: progress and challenges

(2019) Chao Hou et al.   NPG Asia Materials

Seeded growth synthesis of W nanoparticles in reduction process of WO2 by hydrogen

(2019) Guo-Dong Sun et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Densification and properties investigation of W-Cu composites prepared by electroless-plating and activated sintering

(2018) Yuan Li et al.   INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS

Effects of milling time and sintering temperature on structural evolution, densification behavior and properties of a W-20wt.%Cu alloy

(2018) Chenguang Li et al.   JOURNAL OF ALLOYS AND COMPOUNDS

The thermo-mechanical behaviour of W-Cu metal matrix composites for fusion heat sink applications: The influence of the Cu content

(2018) E. Tejado et al.   JOURNAL OF NUCLEAR MATERIALS

Effect of copper content on the dynamic compressive properties of fine-grained tungsten copper alloys

(2018) Wenqi Guo et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

A low-cost, efficient, and industrially feasible pathway for large scale preparation of tungsten nanopowders

(2018) Guo-Dong Sun et al.   INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS

Elaborating the Cu-network structured of the W–Cu composites by sintering intermittently electroplated core-shell powders

(2018) Jianqiang Li et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Enhanced ductility of W Mo Cu alloy through the formation of nanometer-to-micrometer-thick dual-phase transition phase layer

(2018) Jin Cao et al.   MATERIALS & DESIGN

Selective laser melting of tungsten-copper functionally graded material

(2018) Chaolin Tan et al.   MATERIALS LETTERS

Enhanced mechanical and arc erosion resistant properties by homogenously precipitated nanocrystalline fcc-Nb in the hierarchical W-Nb-Cu composite

(2018) Longchao Zhuo et al.   COMPOSITES PART B-ENGINEERING

Size-controlled synthesis of nano Mo powders via reduction of commercial MoO3 with carbon black and hydrogen

(2018) Guo-Dong Sun et al.   INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS

Infiltration sintering of WCu alloys from copper-coated tungsten composite powders for superior mechanical properties and arc-ablation resistance

(2017) Wenge Chen et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Rapid consolidation of ultrafine grained W-30 wt.% Cu composites by field assisted sintering from the sol-gel prepared nanopowders

(2017) Yajie Guo et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microstructure and properties characterization of tungsten–copper composite materials doped with graphene

(2017) Longlong Dong et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microstructure characterization of W-Cu alloy sheets produced by high temperature and high pressure deformation technique

(2017) Wenge Chen et al.   MATERIALS LETTERS

Synthesis and thermal conductivity improvement of W-Cu composites modified with WC interfacial layer

(2017) Chengcheng Zhang et al.   MATERIALS & DESIGN

Effect of Zn and Ni added in W–Cu alloy on penetration performance and penetration mechanism of shaped charge liner

(2016) Ziying Zhao et al.   INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS

Preparation of W-Cu alloy with high density and ultrafine grains by mechanical alloying and high pressure sintering

(2016) W.T. Qiu et al.   INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS

Microstructure, thermal physical property and surface morphology of W-Cu composite fabricated via selective laser melting

(2016) Anru Yan et al.   MATERIALS & DESIGN

The influence of TiB2 content on microstructure and properties of W–30Cu composites prepared by electroless plating and powder metallurgy

(2015) Li-Mei Huang et al.   ADVANCED POWDER TECHNOLOGY

Consolidation behavior of W–20–40wt.% Mo nanoalloys synthesized by thermal decomposition method

(2015) Prasanta Kumar Sahoo et al.   INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS

Characterization of fine-grained W–10wt.% Cu composite fabricated by hot-shock consolidation

(2015) Qiang Zhou et al.   INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS

Experimental investigations on the synthesis of W–Cu nanocomposite through spark plasma sintering

(2015) Ayman Elsayed et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effects of TiN nanoparticles on the microstructure and properties of W–30Cu composites prepared via electroless plating and powder metallurgy

(2015) Li-Mei Huang et al.   MATERIALS & DESIGN

Fabrication of W–Cu/CeO2 composites with excellent electric conductivity and high strength prepared from copper-coated tungsten and Ceria powders

(2015) Ze-Long Lu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Carbothermal synthesis of metal-functionalized nanostructures for energy and environmental applications

(2015) Yafei Shen   Journal of Materials Chemistry A

Thermo-mechanical processing, microstructure and tensile properties of a tungsten heavy alloy

(2014) Jiten Das et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of tungsten addition on thermal conductivity of graphite/copper composites

(2013) Wulin Yang et al.   COMPOSITES PART B-ENGINEERING

Synthesis and densification of W–Cu, W–Cu–Ag and W–Ag composite powders via a chemical precipitation method

(2013) G. Taghavi Pourian Azar et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Preparation and properties of superfine W–20Cu powders by a novel chemical method

(2013) Lei Wan et al.   MATERIALS & DESIGN

Microstructural evolvement and formation of selective laser melting W–Ni–Cu composite powder

(2012) Danqing Zhang et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Synthesis, characterization and densification of WCu nanocomposite powders

(2011) Prasanta Kumar Sahoo et al.   INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS

Effect of Fe on vacuum breakdown properties of CuW alloys

(2011) Cao Weichan et al.   INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS

Tungsten–copper composite production by activated sintering and infiltration

(2011) A. Ghaderi Hamidi et al.   INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS

Synthesis of ultrafine/nanocrystalline W–(30–50)Cu composite powders and microstructure characteristics of the sintered alloys

(2011) Jinglian Fan et al.   INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS

Effect of Fe on microstructures and vacuum arc characteristics of CuCr alloys

(2010) Cao Weichan et al.   INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS

Mutual dependency of mechanical properties and contiguity in W–Cu composites

(2010) M. Amirjan et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Inhibition of grain coarsening up to 1000°C in (AlCrNbSiTiV)N superhard coatings

(2010) Ping-Kang Huang et al.   SCRIPTA MATERIALIA

Effect of Fe on the sintering and thermal properties of Mo–Cu composites

(2009) Xian-liang Zhou et al.   MATERIALS & DESIGN

Ultrafine grained copper alloy sheets having both high strength and high electric conductivity

(2009) Naoki Takata et al.   MATERIALS LETTERS

Influence of minor elements additions on microstructure and properties of 93W-4·9Ni-2·1Fe alloys

(2008) Wensheng Liu et al.   BULLETIN OF MATERIALS SCIENCE

Hardness and tensile properties of tungsten based heavy alloys prepared by liquid phase sintering technique

(2008) Jiten Das et al.   INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS

An experimental investigation on the W–Cu composites

(2008) A. Ibrahim et al.   MATERIALS & DESIGN

The influence of mechanical milling on the properties of W–40wt.%Cu composite produced by hot extrusion

(2007) Daren Li et al.   JOURNAL OF ALLOYS AND COMPOUNDS