Characterization of Inconel 625-SS 304 Weldments Developed by Selective Microwave Hybrid Joining Technique for Promising Applications

Influence of heat treatment on Inconel 625 superalloy sheet: carbides, γ'', δ phase precipitation and tensile deformation behavior

(2022) Xudong Liu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Evaluation of modal characteristics of SS202-SS202 lap joint produced using selective microwave hybrid heating

(2021) Rahul Samyal et al.   Journal of Manufacturing Processes

Optimization of microwave processing parameters on powder-metallurgical 316L stainless steels

(2021) K. Veera Venkata Nagaraju et al.   MATERIALS AND MANUFACTURING PROCESSES

Microwave hybrid heating based optimized joining of SS304/SS316

(2020) Mainak Pal et al.   MATERIALS AND MANUFACTURING PROCESSES

Effect of Power Input on Metallurgical and Mechanical Characteristics of Inconel-625 Welded Joints Processed Through Microwave Hybrid Heating

(2019) Ravindra I. Badiger et al.   TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS

Parametric review of microwave-based materials processing and its applications

(2019) Praveen Kumar Loharkar et al.   Journal of Materials Research and Technology-JMR&T

Microstructure, microtexture and grain boundary character evolution in microwave sintered copper

(2019) G.N. Felege et al.   MATERIALS CHARACTERIZATION

Effect of Ni addition on the densification of TiC: A comparative study of conventional and microwave sintering

(2019) Nivedhita Vasudevan et al.   INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS

Preliminary Metallurgical and Mechanical Investigations of Microwave Processed Hastelloy Joints

(2017) Satnam Singh et al.   JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME

Microstructure and mechanical properties of Inconel-625 welded joint developed through microwave hybrid heating

(2017) Ravindra Ishwar Badiger et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE

Effects of powder size of interface material on selective hybrid carbon microwave joining of SS304–SS304

(2017) Lucky Bagha et al.   Journal of Manufacturing Processes

Microwave–material interaction phenomena: Heating mechanisms, challenges and opportunities in material processing

(2016) Radha Raman Mishra et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

A review on the susceptor assisted microwave processing of materials

(2016) Madhuchhanda Bhattacharya et al.   ENERGY

On microstructure and strength properties of microwave welded Inconel 718/ stainless steel (SS-316L)

(2016) Amit Bansal et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS

Effects of filler metals on the segregation, mechanical properties and hot corrosion behaviour of pulsed current gas tungsten arc welded super-austenitic stainless steel

(2016) K. Devendranath Ramkumar et al.   Journal of Manufacturing Processes

Microstructural investigation of Ni based cladding developed on austenitic SS-304 through microwave irradiation

(2016) Ajit M. Hebbale et al.   Journal of Materials Research and Technology-JMR&T

Structure–Property Correlations in Microwave Joining of Inconel 718

(2015) Amit Bansal et al.   JOM

Effect of pore sizes on the microstructure and properties of the biomedical porous NiTi alloys prepared by microwave sintering

(2015) J.L. Xu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Joining of Inconel-625 alloy through microwave hybrid heating and its characterization

(2015) Ravindra I. Badiger et al.   Journal of Manufacturing Processes

Influence of filler metals and welding techniques on the structure–property relationships of Inconel 718 and AISI 316L dissimilar weldments

(2014) K. Devendranath Ramkumar et al.   MATERIALS & DESIGN

Investigation of Stainless Steel Joint Fabricated Through Microwave Energy

(2014) Prateek Gupta et al.   MATERIALS AND MANUFACTURING PROCESSES

Characterization of bulk stainless steel joints developed through microwave hybrid heating

(2014) Amit Bansal et al.   MATERIALS CHARACTERIZATION

An investigation on microwave sintering of Fe, Fe–Cu and Fe–Cu–C alloys

(2013) RAJA ANNAMALAI et al.   BULLETIN OF MATERIALS SCIENCE

New insight on the solidification path of an alloy 625 weld overlay

(2013) Cleiton Carvalho Silva et al.   Journal of Materials Research and Technology-JMR&T

A new approach to joining of bulk copper using microwave energy

(2011) M.S. Srinath et al.   MATERIALS & DESIGN

Sintering of Titanium in Vacuum by Microwave Radiation

(2011) S. D. Luo et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

A novel route for joining of austenitic stainless steel (SS-316) using microwave energy

(2011) M S Srinath et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE

Investigation on microstructural and mechanical properties of microwave processed dissimilar joints

(2011) M.S. Srinath et al.   Journal of Manufacturing Processes

EFFECT OF COOLING RATES ON SEGREGATION AND DENSITY VARIATION IN THE MUSHY ZONE DURING SOLIDIFICATION OF SUPERALLOY INCONEL 718

(2010) Ling Wang et al.   CHEMICAL ENGINEERING COMMUNICATIONS

Fabrication of copper–TiC–graphite hybrid metal matrix composites through microwave processing

(2009) Reddy G. Chandrakanth et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Microwave sintering of nanocrystalline WC–12Co: Challenges and perspectives

(2009) B. Ratna Sunil et al.   INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS