Mechanical properties of three-dimensional functionally graded triply periodic minimum surface structures

Full compression response of FG-based scaffolds with varying porosity via an effective numerical scheme

(2022) Zefeng Fan et al.   INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES

Mechanical performance of triply periodic minimal surface structures with a novel hybrid gradient fabricated by selective laser melting

(2022) Na Qiu et al.   ENGINEERING STRUCTURES

Optimization-based strut-and-tie model generation for reinforced concrete structures under multiple load conditions

(2022) Yi Xia et al.   ENGINEERING STRUCTURES

A novel analysis method for vibration systems under time-varying uncertainties based on interval process model

(2022) Gang Zhao et al.   PROBABILISTIC ENGINEERING MECHANICS

TPMS-infill MMC-based topology optimization considering overlapped component property

(2022) Sinuo Zhang et al.   INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES

Role of topology in dictating the fracture toughness of mechanical metamaterials

(2022) S. Choukir et al.   INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES

Composition-dependent solidification cracking of aluminum-silicon alloys during laser powder bed fusion

(2021) Holden Hyer et al.   ACTA MATERIALIA

Hybrid multi-objective robust design optimization of a truck cab considering fatigue life

(2021) Na Qiu et al.   THIN-WALLED STRUCTURES

Deformation mechanisms and mechanical performances of architected mechanical metamaterials with gyroid topologies: Synchrotron X-ray radiation in-situ compression experiments and 3D image based finite element analysis

(2021) Wenxia Hu et al.   Extreme Mechanics Letters

Mechanical characteristics and deformation mechanism of functionally graded triply periodic minimal surface structures fabricated using stereolithography

(2021) Cheng Zhang et al.   INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES

Design, mechanical properties and energy absorption capability of graded-thickness triply periodic minimal surface structures fabricated by selective laser melting

(2021) Xiaojie Fan et al.   INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES

Crashworthiness design for multi-cell circumferentially corrugated thin-walled tubes with sub-sections under multiple loading conditions

(2021) Emre İsa Albak   THIN-WALLED STRUCTURES

Mechanical performance and defect analysis of the imperfect micro smooth gyroid cylinder shell structure

(2021) Xiaofei Cao et al.   COMPOSITE STRUCTURES

On crashworthiness of novel porous structure based on composite TPMS structures

(2021) Hui Wang et al.   ENGINEERING STRUCTURES

Development of novel hybrid TPMS cellular lattices and their mechanical characterisation

(2021) Nejc Novak et al.   Journal of Materials Research and Technology-JMR&T

Comparison of Compression Performance and Energy Absorption of Lattice Structures Fabricated by Selective Laser Melting

(2020) Xin Shi et al.   ADVANCED ENGINEERING MATERIALS

Mechanical behavior and deformation mechanism of triply periodic minimal surface sheet under compressive loading

(2020) Zhonggang Wang et al.   MECHANICS OF ADVANCED MATERIALS AND STRUCTURES

Torsional strength of RC members using a plasticity-based variable-angle space truss model accounting for non-uniform longitudinal reinforcement

(2020) Dario De Domenico   ENGINEERING STRUCTURES

Stability behaviour of stiffened curved plates subjected to pure compression

(2020) Sara Piculin et al.   THIN-WALLED STRUCTURES

Multifunctional mechanical‐metamaterials based on triply periodic minimal surface lattices: A review

(2019) Oraib Al-Ketan et al.   ADVANCED ENGINEERING MATERIALS

Mechanical properties and microstructural evolution of TA15 Ti alloy processed by selective laser melting before and after annealing

(2019) Junjie Jiang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

On hybrid cellular materials based on triply periodic minimal surfaces with extreme mechanical properties

(2019) Zeyao Chen et al.   MATERIALS & DESIGN

Hot cracking mechanism affecting a non-weldable Ni-based superalloy produced by selective electron Beam Melting

(2018) Edouard Chauvet et al.   ACTA MATERIALIA

Topological design of multi-cell hexagonal tubes under axial and lateral loading cases using a modified particle swarm algorithm

(2018) Na Qiu et al.   APPLIED MATHEMATICAL MODELLING

On hierarchical honeycombs under out-of-plane crushing

(2018) Jianguang Fang et al.   INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES

Characterisation and constitutive model of tensile properties of selective laser melted Ti-6Al-4V struts for microlattice structures

(2018) Zhiyong Wang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Crashworthiness optimization with uncertainty from surrogate model and numerical error

(2018) Na Qiu et al.   THIN-WALLED STRUCTURES

Anisotropic Ti-6Al-4V gyroid scaffolds manufactured by electron beam melting (EBM) for bone implant applications

(2018) Arash Ataee et al.   MATERIALS & DESIGN

Design of graded lattice structure with optimized mesostructures for additive manufacturing

(2018) Yiqiang Wang et al.   MATERIALS & DESIGN

Mechanical response of a triply periodic minimal surface cellular structures manufactured by selective laser melting

(2018) Lei Yang et al.   INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES

Improved Mechanical Properties and Energy Absorption of BCC Lattice Structures with Triply Periodic Minimal Surfaces Fabricated by SLM

(2018) Miao Zhao et al.   Materials

Continuous graded Gyroid cellular structures fabricated by selective laser melting: Design, manufacturing and mechanical properties

(2018) Lei Yang et al.   MATERIALS & DESIGN

Design of bionic-bamboo thin-walled structures for energy absorption

(2018) Jie Fu et al.   THIN-WALLED STRUCTURES

Functionally graded lattice structure topology optimization for the design of additive manufactured components with stress constraints

(2018) Lin Cheng et al.   COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING

Parameterization of criss-cross configurations for multiobjective crashworthiness optimization

(2017) Guangyong Sun et al.   INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES

Additive Manufacturing-Oriented Design of Graded Lattice Structures Through Explicit Topology Optimization

(2017) Chang Liu et al.   JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME

Insights into the mechanical properties of several triply periodic minimal surface lattice structures made by polymer additive manufacturing

(2017) I. Maskery et al.   POLYMER

Additive manufacturing and mechanical characterization of graded porosity scaffolds designed based on triply periodic minimal surface architectures

(2016) M. Afshar et al.   Journal of the Mechanical Behavior of Biomedical Materials

3D printed components with ultrasonically arranged microscale structure

(2016) Thomas M Llewellyn-Jones et al.   Smart Materials and Structures

On design optimization for structural crashworthiness and its state of the art

(2016) Jianguang Fang et al.   STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION

Design of lattice structures with controlled anisotropy

(2016) Shanqing Xu et al.   MATERIALS & DESIGN

Crashworthiness analysis and design of multi-cell hexagonal columns under multiple loading cases

(2015) Na Qiu et al.   FINITE ELEMENTS IN ANALYSIS AND DESIGN

Dynamic crashing behavior of new extrudable multi-cell tubes with a functionally graded thickness

(2015) Jianguang Fang et al.   INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES

Influence of processing conditions on strut structure and compressive properties of cellular lattice structures fabricated by selective laser melting

(2015) Chunlei Qiu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Compression after impact test (CAI) on NOMEX™ honeycomb sandwich panels with thin aluminum skins

(2014) A. Gilioli et al.   COMPOSITES PART B-ENGINEERING

Mechanical properties of a Ti6Al4V porous structure produced by selective laser melting

(2013) Jianfeng Sun et al.   MATERIALS & DESIGN

Porous material based on spongy titanium granules: Structure, mechanical properties, and osseointegration

(2013) A.P. Rubshtein et al.   Materials Science & Engineering C-Materials for Biological Applications

Evaluations of cellular lattice structures manufactured using selective laser melting

(2012) Chunze Yan et al.   INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE

Computer-aided porous scaffold design for tissue engineering using triply periodic minimal surfaces

(2011) Dong-Jin Yoo   International Journal of Precision Engineering and Manufacturing

As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser Melting

(2011) T. Vilaro et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Mathematically defined tissue engineering scaffold architectures prepared by stereolithography

(2010) Ferry P.W. Melchels et al.   BIOMATERIALS