Turbulent fluidization and transition velocity of Geldart B granules in a spout–fluidized bed reactor

CFD–DEM–VDGM method for simulation of particle fluidization behavior in multi-ring inclined-hole spouted fluidized bed

(2021) Meng Chen et al.   Particuology

CFD-DEM study of mitigation of alternating spout deflection in a spout fluidized bed: A geometry perspective

(2021) Yuanhe Yue et al.   POWDER TECHNOLOGY

Numerical and experimental study of integral multi-jet structure impact on gas-solid flow in a 3D spout-fluidized bed

(2020) Feng Wu et al.   CHEMICAL ENGINEERING JOURNAL

Influences on the transition from bubbling to turbulent fluidization for Geldart's group B particles

(2020) Tom Wytrwat et al.   POWDER TECHNOLOGY

Influence of a sound field on the flow pattern of hollow microbeads in a spout-fluidized bed with a draft tube

(2019) Wei Gu et al.   POWDER TECHNOLOGY

Simulation of coal pressurized pyrolysis process in an industrial-scale spout-fluid bed reactor

(2019) Guanwen Zhou et al.   ADVANCED POWDER TECHNOLOGY

Pressurized calcium looping in the presence of steam in a spout-fluidized-bed reactor with DFT analysis

(2018) Yaming Fan et al.   FUEL PROCESSING TECHNOLOGY

Influences of the fluidizing and spouting pulsation on particle motion in spout-fluid beds

(2018) Maysam Saidi et al.   Particuology

Fluid dynamics performance of phase change material particles in a Wurster spout–fluid bed

(2018) Rui Correia et al.   Particuology

Modeling of particle velocities in an apparatus with a draft tube operating in a fast circulating dilute spout-fluid bed regime

(2017) Wojciech Ludwig et al.   POWDER TECHNOLOGY

Mixing behaviors in an industrial-scale spout-fluid mixer by 3D CFD-TFM

(2017) Xuejiao Liu et al.   POWDER TECHNOLOGY

CFD–DEM model for coupled heat and mass transfer in a spout fluidized bed with liquid injection

(2016) Vinayak S. Sutkar et al.   CHEMICAL ENGINEERING JOURNAL

Combined phase distribution and particle velocity measurement in spout fluidized beds by ultrafast X-ray computed tomography

(2016) Martina Bieberle et al.   CHEMICAL ENGINEERING JOURNAL

Comparison of DEM simulation and experiments in a dual-column slot-rectangular spouted bed with a suspended partition

(2016) Ziliang Wang et al.   CHEMICAL ENGINEERING JOURNAL

Influence of operating parameters and flow regime on solid dispersion behavior in a gas–solid spout-fluid bed

(2016) Shiliang Yang et al.   CHEMICAL ENGINEERING SCIENCE

Computational evaluation of depth effect on the hydrodynamics of slot-rectangular spouted bed

(2016) Kunzan Qiu et al.   POWDER TECHNOLOGY

Bubbling to turbulent bed regime transition of ternary particles in a gas–solid fluidized bed

(2016) GuanHe Rim et al.   POWDER TECHNOLOGY

Transient reacting flow simulation of spouted fluidized bed for coal-direct chemical looping combustion with different Fe-based oxygen carriers

(2015) Subhodeep Banerjee et al.   APPLIED ENERGY

Numerical investigation of the time-related properties of solid phase in a 3-D spout-fluid bed

(2015) Kun Luo et al.   CHEMICAL ENGINEERING JOURNAL

Influence of fluid-mechanical parameters on volumetric mass transfer coefficient in a spout–fluid bed with a draft tube

(2015) Milena Knežević et al.   CHEMICAL ENGINEERING SCIENCE

An offset-method for Euler–Lagrange approach

(2015) Falah Alobaid   CHEMICAL ENGINEERING SCIENCE

Three-dimensional multi-phase simulation of the mixing and segregation of binary particle mixtures in a two-jet spout fluidized bed

(2015) Xiaojia Wang et al.   Particuology

Experimental and numerical investigations of a pseudo-2D spout fluidized bed with draft plates

(2015) Vinayak S. Sutkar et al.   POWDER TECHNOLOGY

Computational study of particle temperature in a bubbling spout fluidized bed with hot gas injection

(2015) A.V. Patil et al.   POWDER TECHNOLOGY

Hydrodynamic investigation of gas-solid flow in rectangular spout-fluid bed using CFD-DEM modeling

(2015) Maysam Saidi et al.   POWDER TECHNOLOGY

Influences of operating parameters on the hydrodynamics of a 3-D spout–fluid bed based on DEM modeling approach

(2014) Shiliang Yang et al.   CHEMICAL ENGINEERING JOURNAL

Numerical study on spout elevation of a gas-particle spout fluidized bed in microwave-vacuum dryer

(2014) Guangyuan Jin et al.   JOURNAL OF FOOD ENGINEERING

The transition velocities in a dual circulating fluidized bed reactor with variation of temperatures

(2014) Myung Won Seo et al.   POWDER TECHNOLOGY

An experimental investigation on the onset from bubbling to turbulent fluidization regime in micro-structured fluidized beds

(2014) Nhi T.Y. Dang et al.   POWDER TECHNOLOGY

Study on the flow behavior in spout-fluid bed with a draft tube of sub-millimeter grade silicon particles

(2013) Guoliang Su et al.   CHEMICAL ENGINEERING JOURNAL

Experimental investigations of a pseudo-2D spout fluidized bed with draft plates

(2013) Vinayak S. Sutkar et al.   CHEMICAL ENGINEERING SCIENCE

Recent Advances of Spout-Fluid Bed: A Review of Fundamentals and Applications

(2013) Yingjuan Shao et al.   International Journal of Chemical Reactor Engineering

Spout fluidized beds: Recent advances in experimental and numerical studies

(2012) Vinayak S. Sutkar et al.   CHEMICAL ENGINEERING SCIENCE

Numerical and experimental study on multiple-spout fluidized beds

(2011) Maureen S. van Buijtenen et al.   CHEMICAL ENGINEERING SCIENCE

Novel Method To Study the Particle Circulation in a Flat-Bottom Spout-Fluid Bed

(2010) Wenqi Zhong et al.   ENERGY & FUELS

Experiment on particle mixing in flat-bottom spout–fluid bed

(2008) Yong Zhang et al.   CHEMICAL ENGINEERING AND PROCESSING

An investigation of MSW gasification in a spout-fluid bed reactor

(2008) Maitri Thamavithya et al.   FUEL PROCESSING TECHNOLOGY