Technological properties of a branched polyethyleneimine derivative as a cross-linker for low molar ratio urea-formaldehyde resins

In-situ modification of low molar ratio urea–formaldehyde resins with cellulose nanofibrils for plywood

(2021) Eko Setio Wibowo et al.   JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY

Crystalline Lamellar Structure of Thermosetting Urea–Formaldehyde Resins at a Low Molar Ratio

(2021) Eko Setio Wibowo et al.   MACROMOLECULES

Morphology and Crystallinity of Urea-Formaldehyde Resin Adhesives with Different Molar Ratios

(2021) Ji Li et al.   Polymers

Effects of nanoclay modification with transition metal ion on the performance of urea–formaldehyde resin adhesives

(2020) Sumit Manohar Yadav et al.   POLYMER BULLETIN

A hydroxyl-containing hyperbranched polymer as a multi-purpose modifier for a dental epoxy

(2020) An Xing et al.   REACTIVE & FUNCTIONAL POLYMERS

Effect of molecular weight of urea–formaldehyde resins on their cure kinetics, interphase, penetration into wood, and adhesion in bonding wood

(2019) Bora Jeong et al.   WOOD SCIENCE AND TECHNOLOGY

Simultaneous Improvement on Strength, Modulus, and Elongation of Carbon Nanotube Films Functionalized by Hyperbranched Polymers

(2019) Qian Duan et al.   ACS Applied Materials & Interfaces

Alumina nanoparticles as formaldehyde scavenger for urea-formaldehyde resin: Rheological and in-situ cure performance

(2019) Pedro Henrique Gonzalez de Cademartori et al.   COMPOSITES PART B-ENGINEERING

Analysis of the hydrolysates from cured and uncured urea-formaldehyde (UF) resins with two F/U mole ratios

(2018) Muhammad Adly Rahandi Lubis et al.   HOLZFORSCHUNG

Characterization of the Low Molar Ratio Urea–Formaldehyde Resin with 13C NMR and ESI–MS: Negative Effects of the Post-Added Urea on the Urea–Formaldehyde Polymers

(2018) Hui Wang et al.   Polymers

Insights into the development of crystallinity in liquid urea-formaldehyde resins

(2017) Arif Nuryawan et al.   INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES

Effects of Compounded Curing Agents on Properties and Performance of Urea Formaldehyde Resin

(2017) Chang Liu et al.   JOURNAL OF POLYMERS AND THE ENVIRONMENT

Formaldehyde emission and VOCs from LVLs produced with three grades of urea-formaldehyde resin modified with nanocellulose

(2016) Nadir Ayrilmis et al.   BUILDING AND ENVIRONMENT

Effect of new hyperbranched polyester of varying generations on toughening of epoxy resin through interpenetrating polymer networks using urethane linkages

(2013) D. Manjula Dhevi et al.   EUROPEAN POLYMER JOURNAL

Hydrolytic stability and crystallinity of cured urea–formaldehyde resin adhesives with different formaldehyde/urea mole ratios

(2011) Byung-Dae Park et al.   INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES

Alternative to latent catalysts for curing UF resins used in the production of low formaldehyde emission wood-based panels

(2011) Nuno Costa et al.   INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES

The reduction of indoor air pollutant from wood-based composite by adding pozzolan for building materials

(2008) Sumin Kim   CONSTRUCTION AND BUILDING MATERIALS