Numerical study of higher-harmonic wave loads and runup on monopiles with and without ice-breaking cones based on a phase-inversion method

Ice-breaking cones are commonly used in the design of marine structures in cold regions. This study investigates the effects of higher-harmonic wave loads and wave runup on a 5-MW offshore wind turbine with and without ice-breaking cones under extreme wave conditions on the Liaodong Peninsula in China. Two ice-breaking cones (upward-downward and inverted types) are considered. The numerical model adopts a two-phase flow by solving unsteady Reynolds-averaged Navier-Stokes (URANS) equations using the volume of fluid (VOF) method. A phase decomposition method through a 'Stokes-like' formulation was adopted to obtain the parameters for each har-monics. The presence of the conical part is seen to increase the second-harmonic wave loads by up to 40%, but it has only limited influence on the fourth and fifth harmonics. The upward-downward-type ice-breaking cone increases the third harmonic, while the inverted-type ice-breaking cone decreases the third harmonic. Due to the phase difference between the first-harmonic and higher harmonics, the largest wave runup occurs at 0 degrees, and 135 degrees is the location with the smallest wave runup. This is because at the 135-degree location, the linear component is positive but the other nonlinear components are negative. For the 0-degree location, all harmonics are positive. By contrast, the inverted type has little effect. The high harmonic wave runup of the minimum point is backwards compared with that of the monopile, and most nonlinear wave runups are different upstream of the monopile.

Automated summary

This study investigates the effects of ice-breaking cones on an offshore wind turbine under extreme wave conditions, and finds that the presence of the cones increases the second-harmonic wave loads and has different effects on the third harmonic. The wave runup is also influenced by the phase difference between different harmonics.