An overview of surface roughness enhancement of additively manufactured metal parts: a path towards removing the post-print bottleneck for complex geometries
Published 2023 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
An overview of surface roughness enhancement of additively manufactured metal parts: a path towards removing the post-print bottleneck for complex geometries
Authors
Keywords
-
Journal
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
Volume -, Issue -, Pages -
Publisher
Springer Science and Business Media LLC
Online
2023-01-12
DOI
10.1007/s00170-023-10814-6
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Chemical and mechanical post-processing of Alloy 718 built via electron beam-powder bed fusion: Surface texture and corrosion behavior
- (2022) Mahmoud Sadeghi et al. MATERIALS & DESIGN
- Effect of phosphoric acid and perchloric acid on Electropolishing of additive manufactured 17-4 PH stainless steel and its characterization
- (2022) Chia-Yu Lee et al. International Journal of Electrochemical Science
- On the effects of laser shock peening on fatigue behavior of V-notched AlSi10Mg manufactured by laser powder bed fusion
- (2022) Erfan Maleki et al. INTERNATIONAL JOURNAL OF FATIGUE
- Plasma electrolytic oxidation coatings on additively manufactured aluminum–silicon alloys with superior tribological performance
- (2022) Lili Wang et al. SURFACE & COATINGS TECHNOLOGY
- Laser surface polishing of Ti-6Al-4V parts manufactured by laser powder bed fusion
- (2022) Muhannad Ahmed Obeidi et al. SURFACE & COATINGS TECHNOLOGY
- Electropolishing of Additively Manufactured Ti-6Al-4V Surfaces in Nontoxic Electrolyte Solution
- (2022) G. M. Tsoeunyane et al. Advances in Materials Science and Engineering
- Influence of Laser Polishing on the Material Properties of Aluminium L-PBF Components
- (2022) Markus Hofele et al. Metals
- High-quality surface smoothening of laser powder bed fusion additive manufacturing AlSi10Mg via intermittent electrochemical polishing
- (2022) Han Liu et al. SURFACE & COATINGS TECHNOLOGY
- In-Situ Laser Polishing Additive Manufactured AlSi10Mg: Effect of Laser Polishing Strategy on Surface Morphology, Roughness and Microhardness
- (2021) Jiantao Zhou et al. Materials
- Electropolishing of Additive Manufactured 17-4 PH Stainless Steel Using Sulfuric Acid
- (2021) Jun-Kai Chang et al. International Journal of Electrochemical Science
- Dimensional Characterizations Using Scanning Electron Microscope and Surface Improvement With Electrochemical Polishing of Additively Manufactured Microchannels
- (2021) Zheng Min et al. JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME
- Electrochemical-Based Surface Enhancement of Additively Manufactured Ti-6Al-4V Complex Structures
- (2021) Haniyeh Fayazfar et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Effect of Cryogenic Grinding on Fatigue Life of Additively Manufactured Maraging Steel
- (2021) Arunachalam S. S. Balan et al. Materials
- Mechanical properties estimation of additively manufactured metal components using femtosecond laser ultrasonics and laser polishing
- (2021) Seong-Hyun Park et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Improving surface quality in selective laser melting based tool making
- (2021) Filippo Simoni et al. JOURNAL OF INTELLIGENT MANUFACTURING
- Post-Processing and Surface Characterization of Additively Manufactured Stainless Steel 316L Lattice: Implications for BioMedical Use
- (2021) Alex Quok An Teo et al. Materials
- Investigations on the Effect of Layers’ Thickness and Orientations in the Machining of Additively Manufactured Stainless Steel 316L
- (2021) Abdulmajeed Dabwan et al. Materials
- Electrochemical mechanical polishing of internal holes created by selective laser melting
- (2021) Chenhao Zhao et al. Journal of Manufacturing Processes
- Two-step laser based surface treatments of laser metal deposition manufactured Ti6Al4V components
- (2021) Hong Shen et al. Journal of Manufacturing Processes
- Gold, Silver, and Electrum Electroless Plating on Additively Manufactured Laser Powder-Bed Fusion AlSi10Mg Parts: A Review
- (2021) Dana Ashkenazi et al. Coatings
- Effects of Laser Polishing on Surface Characteristics and Wettability of Directed Energy-Deposited 316L Stainless Steel
- (2021) Adriel Magalhães Souza et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Studying the Microstructural Effect of Selective Laser Melting and Electropolishing on the Performance of Maraging Steel
- (2021) D. Ahmadkhaniha et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Surface Shot Peening Post-processing of Inconel 718 Alloy Parts Printed by Laser Powder Bed Fusion Additive Manufacturing
- (2021) D. A. Lesyk et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Strategy for Surface Post-Processing of AISI 316L Additively Manufactured by Powder Bed Fusion Using Ultrasonic Nanocrystal Surface Modification
- (2021) Seung-Young Cho et al. Metals
- Orientation effect of electropolishing characteristics of 316L stainless steel fabricated by laser powder bed fusion
- (2021) Wei Han et al. Frontiers of Mechanical Engineering
- Surface characterization of bioceramic coatings on Zr and its alloys using plasma electrolytic oxidation (PEO): A review
- (2021) Arash Fattah-alhosseini et al. Surfaces and Interfaces
- Effect of shot peening on the surface properties, corrosion and wear performance of 17-4PH steel produced by DMLS additive manufacturing
- (2021) Mariusz Walczak et al. Archives of Civil and Mechanical Engineering
- Study on magnetic abrasive finishing process of AlSi10Mg alloy curved surface formed by selective laser melting
- (2021) Yuntao Cui et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Investigation and process optimization for magnetic abrasive finishing additive manufacturing samples with different forming angles
- (2021) Peixin Zhu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effect of surface modifications of additively manufactured Ti-6Al-4V alloys on apatite formation ability for biomedical applications
- (2021) Selim Demirci et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Improving surface quality and superficial microstructure of LDED Inconel 718 superalloy processed by hybrid laser polishing
- (2021) Yufan Liu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Electropolishing of Inconel 718 manufactured by laser powder bed fusion: Effect of heat treatment on hardness, 3D surface topography and material ratio curve
- (2021) Abhishek Shrivastava et al. OPTICS AND LASER TECHNOLOGY
- Fatigue behavior and modeling of additively manufactured IN718: The effect of surface treatments and surface measurement techniques
- (2021) Seungjong Lee et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Laser Polishing of Ti6Al4V Fabricated by Selective Laser Melting
- (2020) Chunyong Liang et al. Metals
- Investigation of Laser Polishing of Four Selective Laser Melting Alloy Samples
- (2020) Dongqi Zhang et al. Applied Sciences-Basel
- Post-Processing of Complex SLM Parts by Barrel Finishing
- (2020) Alberto Boschetto et al. Applied Sciences-Basel
- Thermodynamics analysis and rapid solidification of laser polished Inconel 718 by selective laser melting
- (2020) Yuhang Li et al. APPLIED SURFACE SCIENCE
- On the enhanced antibacterial activity of plasma electrolytic oxidation (PEO) coatings that incorporate particles: A review
- (2020) Arash Fattah-alhosseini et al. CERAMICS INTERNATIONAL
- Improved fatigue strength of additively manufactured Ti6Al4V by surface post processing
- (2020) M. Kahlin et al. INTERNATIONAL JOURNAL OF FATIGUE
- Laser polishing of additively manufactured Ti-6Al-4V: Microstructure evolution and material properties
- (2020) Juliana S. Solheid et al. JOURNAL OF LASER APPLICATIONS
- Gold–Silver Electroless Plating on Laser Powder-Bed Fusion Additively Printed AlSi10Mg Parts
- (2020) Alexandra Inberg et al. Metals
- Influence of secondary phases of AlSi9Cu3 alloy on the plasma electrolytic oxidation coating formation process
- (2020) Ting Wu et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Abrasive flow machining (AFM) finishing of conformal cooling channels created by selective laser melting (SLM)
- (2020) Sangil Han et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Internal surface roughness enhancement of parts made by laser powder-bed fusion additive manufacturing
- (2020) Usman Ali et al. VACUUM
- Application of optimized laser surface re-melting process on selective laser melted 316L stainless steel inclined parts
- (2020) Jafar Ghorbani et al. Journal of Manufacturing Processes
- Investigation on surface integrity of electron beam melted Ti-6Al-4 V by precision grinding and electropolishing
- (2020) Jiang GUO et al. Chinese Journal of Aeronautics
- Effect of a Ni-P coating on the corrosion resistance of an additive manufacturing carbon steel immersed in a 0.1 M NaCl solution
- (2020) Dayi Gilberto Agredo Diaz et al. MATERIALS LETTERS
- AC plasma electrolytic oxidation of additively manufactured and cast AlSi12 alloys
- (2020) Aleksey B. Rogov et al. SURFACE & COATINGS TECHNOLOGY
- Effect of local treatment temperature of ultrasonic nanocrystalline surface modification on tribological behavior and corrosion resistance of stainless steel 316L produced by selective laser melting
- (2020) Auezhan Amanov SURFACE & COATINGS TECHNOLOGY
- Effects of machining surface and laser beam scanning strategy on machinability of selective laser melted Ti6Al4V alloy in milling
- (2020) Chenbing Ni et al. MATERIALS & DESIGN
- Surface post-treatments for metal additive manufacturing: Progress, challenges, and opportunities
- (2020) Erfan Maleki et al. Additive Manufacturing
- A review on the state-of-the-art of surface finishing processes and related ISO/ASTM standards for metal additive manufactured components
- (2020) Jian-Yuan Lee et al. Virtual and Physical Prototyping
- Corrosion resistance improvement of additive manufactured scaffolds by anodizing
- (2020) Guilherme Arthur Longhitano et al. ELECTROCHIMICA ACTA
- Effect of microstructure and porosity of AlSi10Mg alloy produced by selective laser melting on the corrosion properties of plasma electrolytic oxidation coatings
- (2020) L. Pezzato et al. SURFACE & COATINGS TECHNOLOGY
- Effect of Cavitation Erosion Wear, Vibration Tumbling, and Heat Treatment on Additively Manufactured Surface Quality and Properties
- (2020) Sergey N. Grigoriev et al. Metals
- Development and experimental validation of a hybrid selective laser melting and CNC milling system
- (2020) Changyong Liu et al. Additive Manufacturing
- The effects of carbon-based additives on corrosion and wear properties of Plasma electrolytic oxidation (PEO) coatings applied on Aluminum and its alloys: A review
- (2020) Kazem Babaei et al. Surfaces and Interfaces
- Microstructure and machinability of selective laser melted high-strength maraging steel with heat treatment
- (2020) Yuchao Bai et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Laser polishing for improving fatigue performance of additive manufactured Ti-6Al-4V parts
- (2020) Seungjong Lee et al. OPTICS AND LASER TECHNOLOGY
- High-Quality Surface Finishing of Industrial Three-Dimensional Metal Additive Manufacturing Using Electrochemical Polishing
- (2019) Uk Su Kim et al. International Journal of Precision Engineering and Manufacturing-Green Technology
- Effect of Microarc Oxidation-Treated Ti6Al4V Scaffold Following Low-Intensity Pulsed Ultrasound Stimulation on Osteogenic Cells in Vitro
- (2019) Jie Chen et al. ACS Biomaterials-Science & Engineering
- Material Characterization, Thermal Analysis, and Mechanical Performance of a Laser-Polished Ti Alloy Prepared by Selective Laser Melting
- (2019) Yu-Hang Li et al. Metals
- Laser Polishing of Additive Manufactured 316L Stainless Steel Synthesized by Selective Laser Melting
- (2019) Muhannad Obeidi et al. Materials
- Fatigue life and microstructure of additive manufactured Ti6Al4V after different finishing processes
- (2019) L. Denti et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effects of Electropolishing on Mechanical Properties and Bio-Corrosion of Ti6Al4V Fabricated by Electron Beam Melting Additive Manufacturing
- (2019) Yao-Cheng Wu et al. Materials
- Highly effective smoothening of 3D-printed metal structures via overpotential electrochemical polishing
- (2019) Shuai Chang et al. Materials Research Letters
- Magnesium fabricated using additive technology: Specificity of corrosion and protection
- (2019) S.V. Gnedenkov et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Chemical leveling mechanism and oxide film properties of additively manufactured Ti–6Al–4V alloy
- (2019) Yifei Zhang et al. JOURNAL OF MATERIALS SCIENCE
- Post-Processing Effects on Surface Properties of Direct Metal Laser Sintered AlSi10Mg Parts
- (2019) Binnur Sagbas METALS AND MATERIALS INTERNATIONAL
- Laser polishing of additive manufactured tool steel components using pulsed or continuous-wave lasers
- (2019) K. C. Yung et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effects of different surface modifications on the fatigue life of selective laser melted 15–5 PH stainless steel
- (2019) Sagar Sarkar et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Surface quality and material removal in magnetic abrasive finishing of selective laser melted 316L stainless steel
- (2019) Jiong Zhang et al. Journal of Manufacturing Processes
- Abrasive flow machining of laser powder bed-fused parts: Numerical modeling and experimental validation
- (2019) C. Bouland et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Influence of plasma sprayed zirconia coating on surface properties of additive manufactured austenitic stainless steel 316 L
- (2019) Anshumaan Bhagade et al. Materials Research Express
- Electrochemical Polishing of Additively Manufactured Ti–6Al–4V Alloy
- (2019) Yifei Zhang et al. METALS AND MATERIALS INTERNATIONAL
- Material Removal in Ultrasonic Abrasive Polishing of Additive Manufactured Components
- (2019) Jingsi Wang et al. Applied Sciences-Basel
- Surface finishing on IN625 additively manufactured surfaces by combined ultrasonic cavitation and abrasion
- (2019) K.L. Tan et al. Additive Manufacturing
- Modification of surface characteristics and electrochemical corrosion behavior of laser powder bed fused stainless-steel 316L after laser polishing
- (2019) Lan Chen et al. Additive Manufacturing
- Effects of laser polishing on surface microstructure and corrosion resistance of additive manufactured CoCr alloys
- (2018) W.J. Wang et al. APPLIED SURFACE SCIENCE
- Electropolishing Mechanism of Ti-6Al-4V Alloy Fabricated by Selective Laser Melting
- (2018) Yifei ZHANG et al. International Journal of Electrochemical Science
- A review of recent work on discharge characteristics during plasma electrolytic oxidation of various metals
- (2018) Trevor William Clyne et al. INTERNATIONAL MATERIALS REVIEWS
- Surface finish control of additively-manufactured Inconel 625 components using combined chemical-abrasive flow polishing
- (2018) Neda Mohammadian et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Laser polishing of additive manufactured CoCr alloy components with complex surface geometry
- (2018) K.C. Yung et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Optimizing the electrolyte chemistry parameters of PEO coating on 6061 Al alloy by corrosion rate measurement: Response surface methodology
- (2018) Mojtaba Vakili-Azghandi et al. MEASUREMENT
- Plasma Electrolytic Oxidation (PEO) Process on Commercially Pure Ti Surface: Effects of Electrolyte on the Microstructure and Corrosion Behavior of Coatings
- (2018) Arash Fattah-Alhosseini et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Experimental study on finishing of internal laser melting (SLM) surface with abrasive flow machining (AFM)
- (2018) M.S. Duval-Chaneac et al. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
- Additive manufacturing of metallic components – Process, structure and properties
- (2018) T. DebRoy et al. PROGRESS IN MATERIALS SCIENCE
- Laser polishing of additive manufactured CoCr components for controlling their wettability characteristics
- (2018) K.C. Yung et al. SURFACE & COATINGS TECHNOLOGY
- A critical review of powder-based additive manufacturing of ferrous alloys: Process parameters, microstructure and mechanical properties
- (2018) Haniyeh Fayazfar et al. MATERIALS & DESIGN
- Combination of Laser Material Deposition and Laser Surface Processes for the Holistic Manufacture of Inconel 718 Components
- (2018) Jon Arrizubieta et al. Materials
- Reducing surface roughness by chemical polishing of additively manufactured 3D printed 316 stainless steel components
- (2018) Pawan Tyagi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Comparison of electropolished 316L steel samples manufactured by SLM and traditional technology
- (2018) Edyta Lyczkowska-Widlak et al. RAPID PROTOTYPING JOURNAL
- Milling of maraging steel components produced by selective laser melting
- (2017) Alessandro Fortunato et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Surface roughness and radiusing of Ti6Al4V selective laser melting-manufactured parts conditioned by barrel finishing
- (2017) A. Boschetto et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Electropolishing and electropolishing-related allowances for IN625 alloy components fabricated by laser powder-bed fusion
- (2017) V. Urlea et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- The effects of ultrasonic nanocrystal surface modification on the fatigue performance of 3D-printed Ti64
- (2017) Hao Zhang et al. INTERNATIONAL JOURNAL OF FATIGUE
- Application of mechanical surface finishing processes for roughness reduction and fatigue improvement of additively manufactured Ti-6Al-4V parts
- (2017) S. Bagehorn et al. INTERNATIONAL JOURNAL OF FATIGUE
- Electropolishing and electropolishing-related allowances for powder bed selectively laser-melted Ti-6Al-4V alloy components
- (2017) V. Urlea et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effects of plasma electrolytic oxidation process on the mechanical properties of additively manufactured porous biomaterials
- (2017) Zahra Gorgin Karaji et al. Materials Science & Engineering C-Materials for Biological Applications
- Sodium Aluminate Concentration Effects on Microstructure and Corrosion Behavior of the Plasma Electrolytic Oxidation Coatings on Pure Titanium
- (2017) Maryam Molaei et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Laser polishing of additive manufactured Ti alloys
- (2017) C.P. Ma et al. OPTICS AND LASERS IN ENGINEERING
- Surface modification of additive manufactured components by ultrasonic cavitation abrasive finishing
- (2017) K.L. Tan et al. WEAR
- Indentation and erosion behavior of electroless Ni-P coating on pipeline steel
- (2017) Chuhong Wang et al. WEAR
- Study of selective laser melting (SLM) Inconel 718 part surface improvement by electrochemical polishing
- (2017) Zhang Baicheng et al. MATERIALS & DESIGN
- Tailored Surface Treatment of 3D Printed Porous Ti6Al4V by Microarc Oxidation for Enhanced Osseointegration via Optimized Bone In-Growth Patterns and Interlocked Bone/Implant Interface
- (2016) Peng Xiu et al. ACS Applied Materials & Interfaces
- Functional coatings formed on the titanium and magnesium alloys as implant materials by plasma electrolytic oxidation technology: fundamental principles and synthesis conditions
- (2016) Sergey Vasilievich Gnedenkov et al. CORROSION REVIEWS
- On the surface quality of additive manufactured parts
- (2016) A. Barari et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Development of copper-enriched porous coatings on ternary Ti-Nb-Zr alloy by plasma electrolytic oxidation
- (2016) Krzysztof Rokosz et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effect of KOH concentration on the electrochemical behavior of coatings formed by pulsed DC micro-arc oxidation (MAO) on AZ31B Mg alloy
- (2016) Mahshid Sabaghi Joni et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Electropolishing of Re-melted SLM Stainless Steel 316L Parts Using Deep Eutectic Solvents: 3 × 3 Full Factorial Design
- (2016) K. Alrbaey et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Modelling and optimization of laser polishing of additive laser manufacturing surfaces
- (2016) Benoit Rosa et al. RAPID PROTOTYPING JOURNAL
- Finishing of Fused Deposition Modeling parts by CNC machining
- (2016) Alberto Boschetto et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- Electropolishing of CuZn brasses and 316L stainless steels: Influence of alloy composition or preparation process (ALM vs. standard method)
- (2016) C. Rotty et al. SURFACE & COATINGS TECHNOLOGY
- Plasma electrolytic oxidation coatings with particle additions – A review
- (2016) Xiaopeng Lu et al. SURFACE & COATINGS TECHNOLOGY
- Influence of the machining parameters and cooling strategies on the wear behavior of wrought and additive manufactured Ti6Al4V for biomedical applications
- (2016) S. Bruschi et al. TRIBOLOGY INTERNATIONAL
- Reduction of Surface Roughness by Means of Laser Processing over Additive Manufacturing Metal Parts
- (2016) Vittorio Alfieri et al. Materials
- Improving the surface quality and mechanical properties by shot-peening of 17-4 stainless steel fabricated by additive manufacturing
- (2016) Bandar AlMangour et al. MATERIALS & DESIGN
- The status, challenges, and future of additive manufacturing in engineering
- (2015) Wei Gao et al. COMPUTER-AIDED DESIGN
- State-of-the-art on vibratory finishing in the aviation industry: an industrial and academic perspective
- (2015) R. Mediratta et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Laser polishing of selective laser melted components
- (2015) S. Marimuthu et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Laser polishing of additive laser manufacturing surfaces
- (2015) Benoit Rosa et al. JOURNAL OF LASER APPLICATIONS
- Surface Finishes for Ti-6Al-4V Alloy Produced by Direct Metal Laser Sintering
- (2015) Guilherme Arthur Longhitano et al. Materials Research-Ibero-american Journal of Materials
- XPS depth profiling analysis of passive surface layers formed on austenitic AISI 304L and AISI 316L SS after high-current-density electropolishing
- (2015) Krzysztof Rokosz et al. SURFACE & COATINGS TECHNOLOGY
- Finishing of additively manufactured titanium alloy by shape adaptive grinding (SAG)
- (2015) Anthony T Beaucamp et al. Surface Topography-Metrology and Properties
- Chemical polishing of scaffolds made of Ti–6Al–7Nb alloy by additive manufacturing
- (2014) E. Łyczkowska et al. Archives of Civil and Mechanical Engineering
- Electrochemical polishing as a 316L stainless steel surface treatment method: Towards the improvement of biocompatibility
- (2014) Sajjad Habibzadeh et al. CORROSION SCIENCE
- Standardization in additive manufacturing: activities carried out by international organizations and projects
- (2014) M. D. Monzón et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Femtosecond laser post-processing of metal parts produced by laser additive manufacturing
- (2014) Ilya Mingareev et al. JOURNAL OF LASER APPLICATIONS
- On Optimization of Surface Roughness of Selective Laser Melted Stainless Steel Parts: A Statistical Study
- (2014) K. Alrbaey et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- An investigation of ceramic coating growth mechanisms in plasma electrolytic oxidation (PEO) processing
- (2013) R.O. Hussein et al. ELECTROCHIMICA ACTA
- Microstructure and mechanical behavior of laser additive manufactured AISI 316 stainless steel stringers
- (2013) Milton Sergio Fernandes de Lima et al. MATERIALS & DESIGN
- Comparison of different post processing technologies for SLM generated 316l steel parts
- (2013) Lukas Löber et al. RAPID PROTOTYPING JOURNAL
- Electrochemical and chemical methods for improving surface characteristics of 316L stainless steel for biomedical applications
- (2013) Afrooz Latifi et al. SURFACE & COATINGS TECHNOLOGY
- Surface Roughness and Morphology Customization of Additive Manufactured Open Porous Ti6Al4V Structures
- (2013) Grzegorz Pyka et al. Materials
- Surface Modification of Ti6Al4V Open Porous Structures Produced by Additive Manufacturing
- (2012) Grzegorz Pyka et al. ADVANCED ENGINEERING MATERIALS
- Improvement of surface properties of SLM parts by atmospheric plasma spraying coating
- (2012) Baicheng Zhang et al. APPLIED SURFACE SCIENCE
- Surface roughness analysis, modelling and prediction in selective laser melting
- (2012) Giovanni Strano et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Osteoinduction of porous Ti implants with a channel structure fabricated by selective laser melting
- (2011) A. Fukuda et al. Acta Biomaterialia
- Room-Temperature Ionic Liquids: Solvents for Synthesis and Catalysis. 2
- (2011) Jason P. Hallett et al. CHEMICAL REVIEWS
- A Functional Classification Framework for the Conceptual Design of Additive Manufacturing Technologies
- (2011) Christopher B. Williams et al. JOURNAL OF MECHANICAL DESIGN
- The investigation of the influence of laser re‐melting on density, surface quality and microstructure of selective laser melting parts
- (2011) Evren Yasa et al. RAPID PROTOTYPING JOURNAL
- Spectroscopic study of electrolytic plasma and discharging behaviour during the plasma electrolytic oxidation (PEO) process
- (2010) R O Hussein et al. JOURNAL OF PHYSICS D-APPLIED PHYSICS
- The effect of water content on the electropolishing behavior of Inconel 718 alloy in perchloric–acetic acid mixtures
- (2009) Ching An Huang et al. CORROSION SCIENCE
- Electropolishing of CP Titanium and Its Alloys in an Alcoholic Solution-based Electrolyte
- (2009) Kiyoshi TAJIMA et al. DENTAL MATERIALS JOURNAL
- Plasma electrolytic oxidation (PEO) for production of anodised coatings on lightweight metal (Al, Mg, Ti) alloys
- (2009) F. C. Walsh et al. TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING
- Influences of ion migration and electric field on the layered anodic films on Al–Mg alloys
- (2008) R.O. Mota et al. CORROSION SCIENCE
- Electropolishing of 304 stainless steel: Surface roughness control using experimental design strategies and a summarized electropolishing model
- (2008) Chi-Cheng Lin et al. ELECTROCHIMICA ACTA
- Review of shot peening processes to obtain nanocrystalline surfaces in metal alloys
- (2008) S. Bagheri et al. SURFACE ENGINEERING
Find the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
SearchAdd your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload Now